ELITE 106 106
TABLE OF CONTENTS Package Contents ...............................................................................................................4 Control and Connections .....................................................................................................5 Setting up the SHOCKWAFE Elite System ........................................................................8 Setting your TV..............................................................................................................
BLUETOOTH / USB MODE ONLY HDMI ARC HDMI 2 HDMI 3 HDMI 4 OPTICAL COAXIAL AUX USB SYSTEM MEMORY 1 2 NIGHT ENTER TAINMENT MOVIE MUSIC CLEAR VOICE STEREO PURE DIRECT V S D SETUP DSP OFF MENU + ENTER RETURN INFO DIALOG CONTROL ROOM SIZE + SIZE BASS LED DIMMER + VOL LED CENTR+ CENTR S L/R S L/R SHOCKWAFE ELITE Sound bar 2 x Subwoofer Power cables 1 x Soundbar Power cables (Length: 5 ft.) 3.5mm Audio Cable (Length: 4 ft.
USB IN (WMA & MP3 music playback and Firmware update) OPTICAL Digital Optical Audio in AUX Analog Audio In (Stereo 3.5mm) COAXIAL Digital Coaxial Audio in HDMI IN [2] (compatible with HDCP 2.2, 4K HDR pass thru) HDMI IN [3] (compatible with HDCP 2.2, 4K HDR pass thru) HDMI OUT [1] (ARC TO TV) HDMI IN [4] (compatible with HDCP 2.
Press to turn Sound Bar On or Standby.
Back of LEFT Subwoofer LED indicator Power Switch Pairing Button USB IN (For Firmware update only) Power Port LEFT Back Satellite Speaker Port (Connects to Satellite Speaker) Satellite Speaker Port (Connects to Subwoofer) Back of RIGHT Subwoofer LED indicator Power Switch Pairing Button Power Port USB IN (For Firmware update only) RIGHT Back Satellite Speaker Port (Connects to Satellite Speaker) Satellite Speaker Port (Connects to Subwoofer) 7
SETTING UP THE SHOCKWAFE ELITE SYSTEM 8
Back of Sound Bar Plug the Power adapter to the sound bar and into an electrical outlet.
Connect the LEFT Back satellite speakers to the LEFT subwoofer using the included satellite speaker audio cables. Connect the RIGHT Back satellite speakers to the RIGHT subwoofer using the included satellite speaker audio cables.
LEFT & RIGHT Subwoofer 11
Top 7 Top 8 Insert the batteries included in the accessories box and gently push the battery cover back into place. Remove the battery cover by pulling it out from the remote. 9 Turn your Soundbar on by pressing the Power button. Use respective input keys to select an audio input source to be played.
Connect one end of the HDMI cable to the HDMI (ARC) port at the back of your TV. Connect the other end to the TV HDMI [1] (ARC) port on your Nakamichi sound bar.
RE 16
HDMI cables transmit both audio and video. To view video from these devices, turn the Soundbar on, then set the Soundbar input to HDMI IN [2], HDMI IN [3] or HDMI IN [4]. Set your TV input to the HDMI ARC port to which the Soundbar is connected. HDMI IN [2] (compatible with HDCP 2.2, 4K HDR pass thru) HDMI IN [3] (compatible with HDCP 2.2, 4K HDR pass thru) HDMI IN [4] (compatible with HDCP 2.
HDMI OUT [1] (ARC TO TV) 18 If the device is not equipped with a HDMI port, use an Optical or Coaxial output.
HDMI OUT [1] (ARC TO TV) If the device is not equipped with a HDMI port, use an Optical or Coaxial output.
HDMI OUT [1] (ARC TO TV) 4 20 If the device is not equipped with a HDMI port, use an Optical or Coaxial output.
HDMI OUT [1] (ARC TO TV) AUDIO 4 AUDIO If the device is not equipped with a HDMI port, use an Optical or Coaxial output.
1 Power 1 2 BLUETOOTH / USB MODE ONLY 3 4 7 6 5 HDMI ARC HDMI 2 HDMI 3 HDMI 4 OPTICAL COAXIAL AUX USB 3 4 5 SYSTEM MEMORY 8 2 1 2 NIGHT MUSIC MOVIE ENTER TAINMENT 6 9 CLEAR VOICE STEREO PURE DIRECT DSP OFF V S D DSP SETUP 10 11 + 12 ENTER RETURN INFO 14 DIALOG CONTROL 15 SIZE + ROOM SIZE VOL BASS 16 11 LED DIMMER 20 22 23 10 LED 18 19 8 9 13 17 7 MENU CENTR+ TREB + LIP SYNC + CENTR TREB LIP SYNC S L/R + SB L/R + SUR ON S L/R SB L/R SUR O
Press respective buttons to select an audio input source. Each input source (function) will be displayed on the Soundbar’s front LED display.
ACCESSING SETUP ON YOUR REMOTE To use SETUP function, please switch to HDMI ARC input. Setting the SETUP selection: 1. Press the SETUP ( ) button. The selection changes as follows each time the SETUP ( ) button is pressed BLUETOOTH / USB MODE ONLY HDMI ARC HDMI 2 HDMI 3 HDMI 4 OPTICAL COAXIAL AUX USB “DTS:X & DOLBY Dynamic range compression (DRC)”, “Power Saving (Eco)” & “Factory Reset” 2. Press the SETUP ( ) button to access to different setup selection: DRC > ECO > RESET, and press ENTER.
ACCESSING MENU ON YOUR REMOTE To use MENU function, please switch to USB input. Setting the MENU selection:: 1. Press the MENU ( BLUETOOTH / USB MODE ONLY HDMI ARC HDMI 2 HDMI 3 HDMI 4 OPTICAL COAXIAL AUX USB ) button to select 2. Soundbar performing task. SYSTEM MEMORY 1 2 CLEAR VOICE STEREO PURE DIRECT DSP OFF V S D DSP SETUP Firmware Upgrade (USB) or Wireless Subwoofer Pairing and press ENTER. ENTER TAINMENT MOVIE MUSIC MENU 2 ENTER RETURN 3.
ACCESSING INFO ON YOUR REMOTE Switching information displayed on the front panel LED display. Information regarding the Firmware version, Decoder format, EQs mode, Volume, Bass, Center, Treble, Surround and Surround back is displayed. BLUETOOTH / USB MODE ONLY HDMI ARC HDMI 2 HDMI 3 HDMI 4 OPTICAL COAXIAL AUX USB 1. Press the INFO button. SYSTEM MEMORY 1 MUSIC 2 Display changes as follows each time the INFO button is pressed. The information varies according to the input source.
+ ACCESSING EQS ON YOUR REMOTE Press the EQS buttons on your remote to select the desired EQs settings for your preferences. Each EQs settings will be displayed on the Soundbar’s LED Display. MOVIE EQ is the default EQ setting. Every change in EQ, the system will remember the last setting. BASS LOW Reduces the Bass volume to level 01 for night time listening. ON Enables the Subwoofers. MUSIC Reproduces the acoustic environment and lets you feel as if your seated in front of the singer’s stage.
SAVING AUDIO SETTING TO SYSTEM MEMORY Two sets of audio settings can be saved on the Soundbar’s memory, enabling quick loading of settings optimized for user preference.
ACCESSING ROOM SIZE ON YOUR REMOTE Three presets of volume settings for Small, Medium and Large rooms is saved to this unit’s memory, enabling quick loading of settings optimized for different room sizes Room Size Small Medium (Average) Large Square feet 199 326 484 14 x 14 18 x 18 22 x 22 Room dimension: Length x Width (feet) LARGE ROOM MEDIUM ROOM SMALL ROOM 22ft x 22ft (484ft. sq.) 18ft x 18ft (326ft. sq.) 14ft x 14ft (199ft. sq.) (6.5ft) (9.8ft) (12.1ft) Left (6.5ft) (6.
USING BLUETOOTH MODE BLUETOOTH PAIRING Your Sound Bar supports music streaming from smartphones, To pair the Soundbar with a Bluetooth device: tablets, and computers with Bluetooth capability. Device compatibility 1. Press the Bluetooth ( ) button on the remote control. The will vary, see your device’s documentation for more information. LED display on the soundbar will display “BT” blinking.
RE-LINKING THE SUBWOOFER WITH THE SOUNDBAR The subwoofer has already been paired with the Sound Bar by NAKAMICHI. However, they may need to be re-linked if there is no sound coming from the subwoofer. Turn off your TV speakers when programming your sound bar. 1 2 Power and switch ON the soundbar. to USB mode, press and hold the DEMO button 3 Switch for 5 seconds. OR Using the remote control, (a) Switch RIGHT Ensure that the Soundbar is switched OFF.
Insert the two mounting screws into the wall-mount screw holes, and then tighten them.
WALL - MOUNTING THE SATELLITE SPEAKERS To wall-mount the satellite speakers: 1. Attach the mounting screws to the back of the satellite speaker. 2. Align and mount the satellite speaker with the wall mount barcket.
FIRMWARE UPGRADE New firmware that provides additional features or product improvements will be release as needed. Firmware updates can be downloaded at www.nakamichi-usa.com/fw Do not perform this procedure unless firmware update is necessary. Make sure you read the information supplied with the updates before updating the firmware. Checking the firmware version: On the remote control toggle the INFO button until the LED display “FW XX”. The firmware version will be displayed. SOUNDBAR FIRMWARE UPGRADE 1.
UPGRADE PROCESS SOUNDBAR FIRMWARE UPGRADE SUBWOOFER FIRMWARE UPGRADE Firmware upgrade process may take up to 5 to 10 minutes. Update progress is displayed on the front panel display when the firmware is upgrading. During each upgrading stage, there will be a numeric percentage to show its progress. Firmware upgrade process may take up to 5 to 10 minutes.
HELP & TROUBLESHOOTING There is no power. Press the POWER button on the remote control or on the top of your Sound Bar. Ensure the power cord is securely connected. Plug a different device into the electrical outlet to verify that the outlet is working correctly. There is no sound. Increase the volume. Press Volume Up on the remote control or on the top of your Sound Bar. Press MUTE on the remote to ensure the Sound Bar is not muted.
ONE YEAR LIMITED WARRANTY Nakamichi LLC (“Nakamichi”) warrants this product against defects in material or workmanship for the time periods and as set forth below. Pursuant to this Limited Warranty, Nakamichi will, at its option, (i) repair the product using new or refurbished parts or (ii) replace the product with a new or refurbished product. For purposes of this Limited Warranty, “refurbished” means a product or part that has been returned to its original specifications.
GLOSSARY This section explains the technical terms used in this user manual. What is DTS:X Object Based Audio? With traditional audio technologies, which channels (speakers) should output what types of sounds when creating audio sources was pre-defined. This is called "channel-based audio". In contrast, new audio systems such as DTS:X use a new technology called object-based audio. This technology processes each sound (e.g.
GLOSSARY HDCP This Soundbar is compatible with the follow resolutions: HDCP (High-bandwidth Digital Content Protection) is a digital copy protection form VGA 720p/60 Hz, 50 Hz HDMI).
SPECIFICATIONS SOUNDBAR DRIVERS CONNECTIVITY Left & Right 2 x 2.5” Full Range Drivers Center 2 x 2.5” Full Range Drivers Surround Left & Right 2 x 2.5” Full Range Drivers 2 x 1” High Frequency Tweeter HDMI Out (ARC to TV) x 1 [HDCP 2.2] HDMI Input x 3 (4K HDR Pass Thru) [HDCP 2.2] OPTICAL Input x 1 COAXIAL Input x 1 Analog AUX Audio Input x 1 BLUETOOTH 4.
LEGAL & COMPLIANCE FCC Class B Radio Interference Statement NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
