User Manual

SAVING AUDIO SETTING TO SYSTEM MEMORY
+
SETUP MENU
ENTER
CENTR
+
+
LED
SIZE
RETURN INFO
LED DIMMER
VOL
+
TREB
CENTR
ON
SUR
SUR
OFF
TREB
+
LIP
SYNC
+
SB L/R
SB L/R
+S L/R
S L/R
LIP
SYNC
BASS
ROOM SIZE
DIALOG CONTROL
VSD
CLEAR VOICE STEREO PURE DIRECT DSP OFF
BLUETOOTH / USB MODE ONLY
SYSTEM MEMORY
DSP
HDMI 2 HDMI 3
MOVIE
ENTER
TAINMENT
MUSIC
OPTICAL
2
AUX
HDMI
ARC
HDMI
4
COAXIAL
USB
1
NIGHT
Two sets of audio settings can be saved on the Soundbar’s memory, enabling quick
loading of settings optimized for user preference.
Function Button 5 LED DIGITS on Sound Bar
DSP & VOL
Customized Memory 1
Long press to SAVE1
Once saved, show M1SET
Customized Memory 2
Long press to SAVE2
Once saved, show M2SET
SYSTEM MEMORY
LED Display on Sound bar:
Saving settings to system memory:
Hold down the SYSTEM MEMORY 1 or 2
button until “SAVE1” or “SAVE2”, corresponding
to the button pressed, is displayed on LED.
1.
2.
When the SYSTEM MEMORY 1 or 2 settings are
saved, “M1SET” or “M2SET” is displayed.
If system settings are already stored in the selected
memory 1 or 2, the system overwrites the old settings.
Loading settings
1.Press the SYSTEM MEMORY 1 or 2 button
once and the corresponding settings will be
loaded. If the SYSTEM MEMORY 1 button is
pressed, “M1” will be displayed.
The following audio settings can be saved to
system memory:
a) EQ mode
b) Volume
c) Bass
d) Treble
e) Center
f) Surround L&R
g) Surround Back L&R
29