User Manual

RE-LINKING THE SUBWOOFER WITH THE SOUNDBAR

Power and switch ON the soundbar.

Turn off your TV speakers when programming

your sound bar.

The subwoofer has already been paired with the Sound Bar by NAKAMICHI.

However, they may need to be re-linked if there is no sound coming from the

subwoofer.

RIGHT

Ensure that the Soundbar is switched OFF. On the two Subwoofers,

first confirm that the power switches are in the ON position at the

back of the LEFT Subwoofer and then the RIGHT Subwoofer. Press

the PAIRING button on the LEFT and then the RIGHT Subwoofer.

The BLUE LED on the back of the two subwoofers will begin the blink.

Switch to USB mode, press and hold the DEMO button

for 5 seconds. OR Using the remote control, (a) Switch

to USB mode, (b) Toggle the MENU button to “SUB PAIR”

and (c) Press ENTER. The LED display on the Soundbar

will display “SUB PAIR” then “PAIR-“. Once the linking is

completed, the BLUE LED on the back of the two

subwoofers will light up continuously. The two subwoofers

are now linked with the Soundbar.