User Manual

ManualsBrandsWOW ManualsRemote ControlWOW 2AW68-SDMB047 Remote Control

WOWtv RCU

WOWtv RCU Instructions

1、When the WOWtv RCU is not connected to the set-top box, the infrared key value

is sent; when the set-top box Bluetooth is connected, the WOWtv RCU sends the Bluetooth

key value;

2、"OK + up" is the switch key of TV/STB. In the TV state, the learned infrared

code is sent to control the TV, and in the STB state, the Bluetooth code is sent to

control the box.

3、"power, mute, volume+/-, input" are SSU learning keys, among which "power,

Summary of content (7 pages)

PAGE 1
WOWtv RCU WOWtv RCU Instructions 1、When the WOWtv RCU is not connected to the set-top box, the infrared key value is sent; when the set-top box Bluetooth is connected, the WOWtv RCU sends the Bluetooth key value; 2、"OK + up" is the switch key of TV/STB. In the TV state, the learned infrared code is sent to control the TV, and in the STB state, the Bluetooth code is sent to control the box.
PAGE 2
mute, volume+/-" are multiplexed. 4、Infrared State: After the WOWtv RCU is powered on, press the button once and the indicator flashes once, until the button is raised or stops flashing after 1 minute. When using voice, the indicator is always on and the indicator is red.
PAGE 3
7、Interval is 20ms when voice is not used, and 10ms when voice is used; voice sampling is 8K. LEDs Status： Keys： IR keys: red light, bright 100ms, out of 100ms, long pressandlongflash; BT keys: Red light, bright 100ms, out of 100ms, long pressandlongflash; Paring Status： Paring status: red light, bright 250ms, out of 250ms, BT connection successful or failed end，The discovery time was 30s.
PAGE 4
Key force 5 6 7 8 9 10 11 12 13 14 15 NO. 1 metaldome 160g Shell Plastic Material Shell Color ABS raw material (tasteless, no blending), thickness ≥2.0mm Solid color injection black, Screen printing Acid-resistant and alcohol-resistant PCB Circuit board Material PCB Cabling line width and spacing Surface Coating Treatment ≥0.
PAGE 5
2 3 4 5 6 7 8 9 10 11 12 13 14 15 Relative humidity Atmospheric pressure Ambient illumination MCU Shell material Sample Color Battery specification Free Drop test Electrostatic environment test High Temperature Storage test Low Temperature storage test Constant damp heat test 86～106Kpa Natural light or fluorescent lights 200± 50LX WNF171 ABS Reference Customer Requirements Specifications AAA 1.5*2 From a height of 0.
PAGE 6
in the storehouse, the storage period is one year.After the product has been reassessed for more than one year, it can be brought into the market. Product Specifications（BLE Part） No.
PAGE 7
11 12 13 Audio No abnormal audio transmission, no obvious Transmission interference, loss of data, cutting Requirements amplitude and other phenomena Microphone Sensitivity -42±3dB Sensitivity Microphone cannot be less than 58dB Signal-to-noise ratio FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with part 15 of the FCC Rules.