Operating instructions

6. Quick Start
Warning
This chapter serves only as a quick-start guide to the device functions already learned.
The more comprehensive information in the corresponding section of the manual must also be observed.
6.1 Replace / Copy / Create Sensor
1. Enter the vehicle data in iQ 50 (see 2.1)
2. Position the iQ 50 at the wheel sensor to be copied [Fig. II]
3. Select the sensor position in the iQ 50 and start the test (see 2.5)
The sensor must be recognised with OK values (see
2.7.2)
4. 
(The black triangle symbol must appear alongside this sensor again)
5. Call up the context menu of the wheel sensor by pressing and holding the space alongside the wheel symbol (see
2.5.2)
6. Select and call up the desired function

2
Replace sensor (see 2.8)

3
Copy / create sensor (see 2.9)
6.2 Teach in Sensor at the Vehicle
Before teaching in a new sensor at the vehicle,
please observe the manufacturer’s instructions on this topic.
32