User manual iQ 150 – Generation 21 Scieneo.amplio 2 2153-ENG / V-1.
All Rights Reserved. The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
Content 1 2 3 4 5 6 7 8 9 For Your Safety ................................................................................................. 3 Caring for Your iQ150 ..................................................................................... 4 Regulatory Information ..................................................................................... 5 Information on the Power Cord ......................................................................... 6 Battery Pack Safety .................
1 For Your Safety Before using the IQ150, make sure that you understand the following precautions: Do not drop, crush, or step on the iQ150. Do not place objects or apply heavy pressure on the iQ150. Do not place on uneven or unstable work surfaces. Do not block the openings provided for ventilation, as overheating may occur. Do not use or store the iQ150 in extreme weather conditions. Do not expose to sudden changes in temperature or humidity: keep the iQ150 away from heating and A/C vents.
1.1 Caring for Your iQ150 To avoid electrical shock or damage to the unit… Disconnect power from the computer by unplugging the power cord from the AC outlet (not by unplugging the power cord from the computer). Be sure not to clean the computer when it is plugged into a wall socket. When cleaning the unit, clean only with a damp soft cloth. Do not pour liquid onto the unit. Do not clean while the computer is “on” or plugged into a wall socket.
1.2 Regulatory Information Product: scieneo.amplio 2 (iQ150) Model No.: EC10IS2 Applicant: Elitegroup Computer Systems Co., LTD European Notice Products with the CE Marking comply with both the EMC Directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC) and R&TTE Directive (1999/5/EC) issued by the Commission of the European Community.
1.3 Information on the Power Cord To reduce the risk of electric shock or damage to the equipment: Plug the power cord into an AC outlet that is easily accessible at all times. Disconnect power from the computer by unplugging the power cord from the AC outlet (not by unplugging the power cord from the computer). If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-pin outlet.
When discarding a battery pack, contact your local waste disposal provider regarding local restrictions on the disposal or recycling of batteries. Use only supplied AC Adapter for charging. CAUTION! Danger of explosion if battery is incorrectly replaced. Only qualified service technicians should replace and discard the battery pack. Replace only with same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions or local laws. 1.
1.7 Headset and Earphone Volume Level Notice Listening to music at high volume levels and for extended durations can damage one's hearing. To reduce the risk of hearing damage, lower the volume to a safe, comfortable level and reduce the amount of time listening at high levels. For your own safety, before using headsets or earphones, always reset the volume. Some headphones are louder than other headphones, even if the volume control setting is the same.
2 Touring the WOW! 150 2.1 Front 2 1 3 5 4 12 11 7 8 9 10 1. Built-in rotating camera Use the Built-in rotating camera for video conferencing. 2. Microphone The microphone is used when you are having an audio/video conference with the other party. 3. LCD display Contents of the current system operation are displayed here. 4. Camera button When the camera software is running, press this button to view the software in full-screen mode.
9. Touch pad Use the touch pad and two buttons as a mouse. See “Using The Touch Pad”. 10. Touchpad Buttons Works like the two buttons on an ordinary mouse. 11. Scrolling switch Use the scrolling switch when the system is in tablet mode. Scroll from left to right: for scrolling up function Scroll from right to left: for scrolling down function. 12. Power button Press this button to turn your iQ150 on and off. See “Switching the Power On”. 2.2 Left view 1 1. 2 2 2 External monitor port 2.
2.3 Right view 1 2 3 4 5 6 1. Stylus pen slot The Stylus pen for the touch screen is stored here. 2. Headphone jacks Use the headphone jacks to connect external headphone sets. 3. Microphone jack Use the microphone jack to connect an external microphone. 4. USB 2.0 port Use this port to connect Universal Serial Bus devices. The iQ150 supports v.2.0 of the USB standard. 5. Ethernet / LAN (RJ-45) Use this port to connect a standard RJ-45 plug of a router or ADSL modem. 6.
2.4 Back 1 2 3 1. Handle Use the handle to carry the iQ150. 2. LCD Display Rotating Bar This bar is used to rotate the LCD display. 3. Scrolling switch Use the scroll bar when the system is in tablet mode.
2.5 Base 1 2 3 1. Battery bay The battery pack is stored here. 2. Battery lock switch Use the battery lock switch to lock the battery pack in the battery bay. 3. Stereo speakers The stereo speakers allow for audio output.
3 Getting Started Congratulations on your purchase of the iQ150. Your iQ150 features a built-in rotating camera, two headphone ports for sharing music, a rotating LCD display panel, and touch screen functions. In this section, you will be introduced to the basic operations of your iQ150. 3.1 Installing the Battery WARNING! Before installing or removing the battery, make sure the iQ150 is turned off. 1.
3.2 Removing the Battery Pack 1. Slide and hold the battery lock switch to the right, in the unlocked position. 2. Lift and remove the battery. NOTE You must charge the battery pack for at least six hours before using it for the first time. 3.3 Operating on Battery Power Your computer comes with a rechargeable battery pack that lets you operate the computer without an external power source.
3.5 Connecting the AC Adapter A universal AC adapter is provided to supply your computer with power and also charge the computer’s battery pack. The adapter’s AC input voltage can range anywhere from 100 to 240 volts, covering the standard voltages available in almost every country. To connect the computer to an external power source: WARNING Do not use inferior extension cords as this may result in damage to your WOW! 150. WOW! 150 comes with its own AC adapter.
3.7 Opening the LCD Panel To open the LCD panel: 1. Steady the base of the iQ150 with one hand. 2. Hold a corner of the LCD panel with the other hand. 3. Gently raise the LCD panel to the upright position. WARNING! Never slam the LCD panel shut, as this may damage the Display. NOTE ! Do not grip the Built-in rotating camera when trying to open or close the LCD panel. LCD Care LCD screens are delicate devices that need careful handling.
3.8 Turning On Your Computer Once you have connected your AC adapter or charged the battery pack, you can power on your iQ150. When you power on your iQ150, the Power-On Self Test (POST) runs automatically to check the internal hardware and configuration. After the POST is completed, your iQ150 loads the installed operating system. If hardware configuration has been changed or the POST fails, a warning message may appear on the screen.
3.10 Conserving the Battery Power You can use a combination of key controls to enter the sleep or hibernation mode to conserve the battery power. In the sleep mode, hardware devices, such as the display panel and hard disk, are turned off to conserve energy. To enter the hibernation mode in Windows: Press the Windows logo key, and then press [U] or. When the popup window appears, press and hold [Shift + H]. To exit the sleep or hibernation mode: Press the power button.
3.11 LED Status Indicators The LED status bar is on the right side and allowing you to see the system and power status of your iQ150 at a glance. LED Symbol Indication Blue light indicates the numeric keypad is activated Blue light indicates the cap-lock is activated. Blue light indicates the system is reading/writing data. Blue light indicates the WLAN module is active.
4 Using the WOW! 150 4.1 Using the Keyboard You can use certain key combinations to quickly configure system settings. Graphic symbol Action System control Fn + F1 Turn the WLAN module off or on. Fn + F2 Enter the sleep mode. Fn + F3 Turn off the volume output. Fn + F4 Decrease the speaker volume. Fn + F5 Increase the speaker volume. Fn + F6 Switch the display between the LCD panel and the external monitor. Fn + F7 Decrease the brightness of the LCD.
Fn + SysRq (PrtSc) Capture the on screen display as a graphic. Fn + Ins (Num LK) Lock and unlock the number pad. Fn + Del (Scr LK) Turn the scroll lock function on or off. Fn + ↑ (PgUp) Move to the previous page. Fn + ↓ (PgDn) Move to the next page. Fn + ← (Home) Move the cursor to the beginning of a row. Fn + → (End) Move the cursor to the end of a row. 4.2 Using the Touch Pad The touch pad includes a touch-sensitive pad, a scroll bar and two buttons, and can be used like a mouse.
• To left-click, press the left button once. • To double click, quickly press the left button twice. • To right-click, press the right button once. • To drag and drop, press and hold the left button, and move your finger on the touch pad to the desired location. TOUCHPAD PRECAUTIONS The TouchPad is a pressure sensitive device. Please take note of the following precautions. Make sure the TouchPad does not come into contact with dirt, liquids or grease.
4.4 Quick Controller Press the Home button twice to launch the quick controller display panel when the computer is turned to tablet mode. Brightness Control – Decrease or increase the screen brightness after you click the + / - key. Volume Control – Decrease or increase the volume when you click on the + / - key. Switch Display – This function applies when you are connecting a projector. 90 Degrees Counter Clockwise Rotation – The LCD display will rotate in a counter clockwise position.
4.5 Rotating the Display Panel The display panel of your notebook can rotate up to 180 degrees, clockwise or counterclockwise. You can fold it down with the display facing up, and use it as a writing pad. By clicking the icon (1) in the Quick Launch bar, the view of the desktop can be rotated manually. 1 To rotate the display panel: 1. Lightly grip the bottom corners of the display panel with your fingers while keeping your palms on the base of the iQ150. 2.
3. Turn 180 degrees until the display panel gently snaps into place. WARNING Do not try to turn the display panel more than 180 degrees. NOTE If you rotate the display panel clockwise, you must turn it counterclockwise to return to its original position. If you rotate the display panel counterclockwise, you must turn it clockwise to return to its original position.
4.6 Using the Display Panel as a Writing Pad 1. Make sure the display panel has been rotated 180 degrees. 2. Hold the display panel by one or both of the upper corners. 3. Gently lower the display panel to the closed position.
4.7 Using the Built-in Rotating Camera The built-in rotating camera can rotate up to 180 degrees, and is equipped with an internal sensor to automatically switch to the correct orientation. You can rotate the built-in rotating camera back and forth to use on both sides of the display panel. To rotate the built-in rotating camera: 1. Hold the edge of the built-in rotating camera with your thumb and index finger. 2. Use your thumb to push the bottom edge of the built-in rotating camera up. 3.
4.8 Sharing the Same Audio Source The two headphone ports located on the right side of the iQ150 allow two persons to share the same audio source, such as music, movies and videos. To share the same audio source: 1. Plug in two sets of headphones. 2. Open the audio or video file you wish to listen to. WARNING Loud volume may damage your hearing. Listen to music at a moderate level, and avoid continuous use of headphones over a long period of time.
5 Network Communication 5.1 Establishing a Wireless Connection The iQ150 are offered a integrated WLAN card. To enable WLAN on your iQ150, press [Fn + F1]. To set up a wireless network connection, proceed as follows: 1. Click the wireless network icon in the system tray at the bottom right. 2. Available connections are scanned and displayed. Select the connection to use, and then click Connect. Follow the wizard's instructions and enter the security key. 5.
6 Troubleshooting Troubleshooting activity should only by authorized personnel. Your iQ150 has been fully tested and complies with the system specifications by WOW! before shipping. However, incorrect operations and/or mishandling may cause problems. You may also encounter simple setup or operating problems that can be solved by considering the following suggestions. If the problem persists, contact your dealer for service. Make sure the AC adapter is properly plugged into the iQ150 and a wall outlet.
WARNING ! Perform a manual data backup before starting the system recovery. All the data on the C: partition are deleted. 1. Start the computer 2. Click on "backup now“ on the desktop. 3. The system recovery is started from the hard disk. 4. Carry out a restart. The following message appears on screen for a few seconds: “To establish the status on delivery, follow the instructions in the manual” 5. To start system recovery press the F9 key within this period of time.
After Systemrecovery the WOW! Software will be brought back via online update on the current state.
7 Specifications Items Prototype Description Model Nr: EC10IS2 scieneo.amplio 2 (iQ150) CPU Intel® Atom Processor N2600 1.66GHz Memory • Single-channel DDR3 800 MHz So-DIMM DRAM module • Supports 1GB/2GB of system RAM Chipset Intel® NM10 Express Chipset Audio Codec Realtek ALC269-VB6 Azalia integrated audio Analog 2.1 D3 mode support Card Reader • Support 2 in 1 SDHC/ MMC Memory Card. • USB 2.0 interface • Support boot from CR LAN Controller Supports 10 and 100 Mb/sec.
Battery Extended 6 cell Li-ion battery pack AC-Adapter • 10.8V/ 5200mAH, 3.65V/2600mAH • The battery will be 70 percent charged in about 150 mins and fully charged in about 260mins Automatics Voltage adjustment between 100 and 240VAC 50/60Hz, 40Watts • Dimensions Manufacturer: Lite-On Technology Corp.Model: PA-1400-11 (AC 2 Pin) Dimension: 268 x 208.5 x 47.43mm (With 6 cells) (W x D x H) Weight Target 10.1" W LCD /HDD/ CAM/ 6cell battery pack: 1.6 Kg Bluetooth Support Bluetooth V2.
9 Contacts Importer: DynaTech & Translatorworld Am Brand 4 D-07580 Rückersdorf +49(0)36602 / 260-500 (Service) http://www.dynatech.de • info@dynatech.de Distribution: WOW! Würth Online World GmbH Schliffenstraße Falkhof 74653 Künzelsau +49 (0) 7940/15-1770 +49 (0)7940/15-3299 info@wow-portal.com http://www.wow-portal.com Please contact for further questions and for service to the Würth company of their country.
2153-ENG / V-1.
