Installation Guide

ManualsBrandsWOWOW ManualsBath4 in. Centerset Double Handle Mid Arc Bathroom Faucet with Drain Kit Included in Matte Black

Table Of Contents

OPERATION

• Double levers style handles

• Maximum handle(s) rotation angle is 90˚ to full on

• Rotate hot side counter clockwise to open (clockwise to close)

• Rotate cold side clockwise to open (counter clockwise to close)

24"(600mm)

9/16"

G1/2

Ø1"(25)

(100mm)

Unsuitable sink size：

1"(25mm)

Hole Size

TWO HANDLE LAVATORY

CENTERSET FAUCETS

You may need

With 1.2 gpm are compliant with

California water effi ciency regulations,

Complies with California Proposition

65 and with the Federal Safe Drinking Water Act.

In areas with extremely low water pressure causing the basin faucet

water flow to be unsatisfactory , replace the 2.2 gpm aerator to improve

the water flow in the basin faucet.

Cleaning and Care

Care should be given to the cleaning of this product. Although its finish

is extremely durable,

It can be damaged by harsh abrasives or polish. To clean, simply wipe

gently with a damp cloth and blot dry with a soft towel.

To READ ALL the instructions completely before beginning.

For easy installation of your faucet you will need:

To READ ALL warnings, care, and maintenance information.

1.2GPM 4.5L/min

Maintenance

If faucet exhibits very low flow:

A. Remove and clean aerator (2) with hand,

B. Shut off water supply valves.

Replace valve assembly (4).

When reinstalling parts, make sure bonnet

nut (5) is tightened securely with a wrench.

If faucet leaks from under handle:

Using a wrench, ensure bonnet nut

(5) is tight.

If leak persists:

Shut off water supply valves.Replace valve assembly (4).

When reinstalling parts, make sure bonnet nut (5)is tightened

securely with a wrench.

If faucet leaks from spout outlet:

Shut off water supply valves.

Replace valve assembly (4).

When reinstalling parts, make sure bonnet nut (5) is tightened

securely with a wrench.

Install valve assembly (4) correctly for proper handle rotation.

unit:inch(mm)

3.8"

(97mm)

5.7"

(145mm)

(126mm)

8.5"

(215mm)

3.2"

(80mm)

2.2"

(56mm)

0.2" (6mm) Min. Deck Thickness

1.2"(30mm) Max. deck Thickness

2x1" to 1.5"

(25mm to 38mm)

Hole Size

4"centers

(102mm)

0.9"

(23mm)

(50mm)

Min. 1.2"(32mm)

clearance to back

splash

Hot

Cold

2xG1 /2

(156mm)

1 1/4''

(Ø32mm)

9.5"(240mm)

8.7"(220mm)

Ø2.2"

(55mm)

Min. 1.6"

(Ø41mm)

Hole Dia

1.1" to

2.5"

(28 to

64mm)

Summary of content (2 pages)

PAGE 1
TWO HANDLE LAVATORY CENTERSET FAUCETS unit:inch (mm) 1.2GPM 4.5L/min Min. 1.2"(32mm) clearance to back splash 8.5" (215mm) You may need Hot 2x1" to 1.5" (25mm to 38mm) Hole Size 4"centers (102mm) 6" (156mm) 2xG1 /2 With 1.2 gpm are compliant with California water effi ciency regulations, Complies with California Proposition 65 and with the Federal Safe Drinking Water Act. 0.2" (6mm) Min. Deck Thickness 1.2"(30mm) Max. deck Thickness G1/2 2.2" (56mm) 1.1" to 2.
PAGE 2
Notes 1 4 1 Before installing the valves, clean the water pipe thoroughly to avoid dirt and deposits. 1.Remove the washer (2) , black gasket (4) and nut (5) from the assembly. 2.Slide washer (2) up to underside of flange (3). Insert flange (3) and washer (2) into sink and secure with the black gasket (4) washer and nut (5) from underneath the sink. 3.Put down and check the Spring loaded stopper (1). 4. Connect assembly to drain. 1 2 3 4 5 6 5 1 Provided with necessary models.