User manual Item No.
Copyrights and acknowledgements Copyright and acknowledgements Skype, Skype logo and S logo are trademarks or registered trademarks of Skype Limited. Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation in the United States and other countries. Windows Vista is a trademark of the Microsoft group of companies. Windows Live is a registered trademark of Microsoft Corporation. Mac and Mac OS are trademarks of Apple Inc.
Contents Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Package contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Getting started. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Battery and power requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Accessing the interface from your internal network. . . . . . . . . . . . . . . . . . . . . . Setting up port forwarding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Creating, saving and playing back paths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using Rovio with VoIP applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Updating the Rovio firmware. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction Thank you for purchasing Rovio™ from WowWee™! With Rovio™, you will always be just a click away from the people and places that are important to you. Rovio is the Wi-Fi equipped mobile webcam that enables you to view and interact with its environment through streaming video and audio, wherever it is! Easily control Rovio remotely 24/7 from anywhere in the world! Use any webequipped device: PC or Mac, cell phone, smartphone, PDA or even your video game console.
Introduction Package contents Package contents This package contains the following: 1 x Rovio™ 1 x Charging dock with built-in TrueTrack™ Beacon 1 x Mast 1 x 6 V 3000 mAH NiMH rechargeable battery pack 1 x Quick start guide 1 x 8 V AC/DC adapter 1 x USB cable 1 x User manual 1 x Rovio Setup CD 7
Quick overview Rovio Quick overview Rovio USB connector Neck Power button with LED indicator Antenna TrueTrack sensor Microphone Camera LED indicators IR sensors Headlight Omni-directional wheels Speaker Underside of Rovio Battery compartment Charging contacts 8
Quick overview Charging dock Charging dock Charging dock mast TrueTrack Beacon Metal rim Charging contacts LED indicator 8 V AC/DC adapter Back view of charging dock Dock Power connector (From power adapter) 9
Getting started Battery and power requirements Getting started This section describes how to get your Rovio up and running. Battery and power requirements This section describes the battery and power requirements for Rovio and its charging dock with built-in TrueTrack Beacon. Rovio Rovio uses a rechargeable 6 V NiMH battery pack (included). Charging dock and TrueTrack™ Beacon The charging dock with built-in TrueTrack™ Beacon requires power from an 8V AC/DC adapter.
Getting started Assembling the charging dock Assembling the charging dock To assemble the charging dock: 1. Place the charging dock on the floor in the room you want to use as Rovio’s home base. 2. Attach the mast to the charging dock by slotting it into position as illustrated. 3. Plug the power cable into the port on the back of the charging dock and then plug the power adapter into the electrical outlet.
Getting started Assembling the charging dock 4. Two red dots will project light onto the ceiling. To optimize the signal, point the red dots at the center of the ceiling away from unsmooth surfaces such as lighting fixtures, fans, air vents and corners. NOTES: The red dots are a guide to help you set up the charging dock. If the light turns off while you are positioning the dots, touch the metal rim to reactivate it. During normal operation the red light will not be lit.
Getting started Installing and charging the battery pack Disassembling the charging dock To disassemble the charging dock: 1. Unplug the power cable from the back of the charging dock and from the electrical outlet. 2. Turn the charging dock over and locate the two tabs that hold the mast in place. Using two fingers, squeeze both tabs towards each other and remove the mast. Installing and charging the battery pack Before you use your Rovio, you need to install and charge the battery pack.
Getting started Installing and charging the battery pack To charge the batteries: 1. Ensure that the power to the electrical outlet is turned on and that Rovio is turned on by pressing the power button; Rovio’s LEDs will light up. 2. Place Rovio in its assembled charging dock as illustrated. The LEDs on Rovio will pulse quickly to indicate that it has begun charging. 3. During charging, the LEDs on Rovio will pulse slowly; a single charge takes approximately two hours.
Configuring your Rovio the first time Installing the Rovio Setup software Configuring your Rovio the first time Before you use Rovio for the first time, you will need to configure your Rovio.
Configuring your Rovio the first time Installing the Rovio Setup software 3. If Autoplay is enabled on your computer, the Rovio Setup installation dialog will appear. If it does not, locate the RovioSetup.exe file on the CD and click on it to begin installation. The Rovio Setup wizard will appear. 4. Follow the onscreen instructions for installing the Rovio Setup software. NOTE: If you are using the Rovio Setup CD, you should not turn Rovio on while it is connected to your computer via USB.
Configuring your Rovio the first time Mac users 6. Select the option Use the following IP address and enter the following information: IP address 192.168.10.5 Subnet mask 255.255.255.0 Default gateway Leave blank 7. Once your Ad hoc connection is established, you can interface directly with Rovio to change its settings from the Settings button (refer to the Settings subsection in the Description of interface section). Enter http://192.168.10.18 in the address bar of your Internet browser.
Configuring your Rovio the first time Mac users 2. Note your current Wi-Fi settings. a. From the Apple menu, select System Preferences. b. Select the Network option and then select AirPort located in the Network Status pane. c. Click on the Advanced button, and then select the TCP/IP tab. Note all the network settings that appear, as you will need them throughout the configuration. 3. You need to verify the IP address that you will use for Rovio.
Configuring your Rovio the first time Mac users 4. You need to connect directly to your Rovio (Ad hoc connection). Click on AirPort in the menu bar on top of the screen. Select the ROVIO_WOWWEE network (your Rovio). 5. You now need to adjust the TCP/IP settings for your computer to work with Rovio. To do so: a. From the Apple menu, select System Preferences. b. Select the Network option and then select AirPort located in the Network Status pane. c.
Configuring your Rovio the first time Mac users 7. Now you will configure Rovio’s network settings to work with your router. In the Rovio interface, click on the Settings button located at the top right. Select the Network tab. 8. In the SSID field, type in the name of your wireless network (i.e. your router). 9. Change the mode to Infrastructure. 10. Next, if you use a wireless network password, you will need to enter it. Select the type of Encryption (e.g. WEP 64) and then select the type of Key (e.g.
Rovio basics 15. In the address bar of your web browser, enter in the IP address you entered in the Rovio settings from step 11 (e.g. 210.172.15.7). You can now control your Rovio using its interface. NOTE: If you want to set a password for your Rovio, turn the security settings on or off, or add a new user, click on the Settings button in the Rovio interface, and then select the Security tab. Enter the information for a new user.
Rovio basics TrueTrack Beacons Rovio uses TrueTrack Beacons to help it locate its charging dock (home base). The charging dock comes with a built-in TrueTrack Beacon. The Beacon projects two IR signals on the ceiling that Rovio uses as its guiding lights to track the location of the Beacon. To extend Rovio’s navigation distance, you can install additional TrueTrack Room Beacons (sold separately) to help it locate additional rooms to which you want Rovio to navigate.
Overview of the Rovio interface Using Rovio’s interface Overview of the Rovio interface This section describes Rovio’s user interface. Using Rovio’s interface To control Rovio you must have a web-enabled device. System requirements Your web-enabled device must meet the following system requirements: • Device running one of the following browsers: • Internet Explorer 6 or higher, or • Mozilla Firefox 1.5 or higher, or • Safari 3.0, or • Mobile Safari, or • Internet Explorer Mobile, or • Opera Mobile.
Overview of Rovio’s interface Description of interface Description of interface This section outlines the main controls in the Rovio user interface. 1 Navigation controls 2. Camera position controls 3. Camera capture control 4. Headlight control 5. Auxiliary controls 6. Indicators 7. Settings 8. Video display pane 9.
Overview of Rovio’s interface Description of interface - Navigation controls The following tables outline the main controls in the Rovio user interface. NOTE: Depending on the web browser you use, some of these options might not be available. Navigation controls Command Description Rotation buttons Allows you to rotate Rovio on the spot in increments. Rotate Rovio counter-clockwise. Click on the button and hold for continuous turning. Rotate Rovio clockwise.
Overview of Rovio’s interface Description of interface - Camera controls, Camera capture control, Camera controls Command Description Camera position low Positions the neck at the lowest position. You can also use the keyboard button 1. Camera position mid-way Positions the neck mid-way. You can also use the keyboard button 2. Camera position high Positions the neck at full height. You can also use the keyboard button 3.
Overview of Rovio’s interface Description of interface - Auxiliary controls Auxiliary controls Command Description Paths tab Allows you to set path of way points to which Rovio will navigate. Refer to the section Creating and saving paths for more details. Record/Save Records a path and then saves it to Rovio’s memory using a path name. When you record a path, all commands are recorded including head positions, photo, and headlight commands.. Delete Deletes the selected path.
Overview of Rovio’s interface Description of interface - Auxiliary controls Command Video priority slider Description Adjusts Rovio’s video quality by adjusting video frame rate and quality. Move the slider to the left to lower the frame rate and quality; move the slider towards the right to increase the frame rate and quality. Video Adjusts the brightness of the video stream from Rovio.
Overview of Rovio’s interface Description of interface - Indicators Indicators Indicator Description Nav Indicates the strength of the navigation signal received from the charging dock or a TrueTrack Room Beacon. Full bars indicate a strong signal. 0-9 Indicates the room ID number assigned to a room. as set on the TrueTrack Room Beacon (sold separately). 0 is always assigned to the charging dock. Note that the room ID numbers only appear when the Beacon is in range.
Overview of Rovio’s interface Description of interface - Settings (Video and Movement tab) Settings This button allows you to specify various settings for Rovio including video preferences, router information and security settings. NOTE: Changes in the Settings menu are not recordable. Command Description Video tab Allows you to adjust video settings. Resolution Set the video resolution to the required size (in pixels).
Overview of Rovio’s interface Description of interface - Settings (Movement and Photo tab) Command Turn speed Description Adjust the speed of Rovio’s turning movements. Move the slider to the left to decrease the turning speed; move the slider to the right to increase turning speed. Angle Turn Speed Adjust the speed of Rovio’s turning angle. Move the slider to the left to decrease the speed of the turning angle; move the slider to the right to increase the speed of the turning angle.
Overview of Rovio’s interface Description of interface - Settings (Photo and Security tab) Command Description Password Enter the password you use for your mail server, if required.. Confirm Password Enter the same password you use in the Password field, if required.. Email Settings Specify email settings to which you send video screen captures. Sender Email Address Specify an email address from which to send video screen captures.
Overview of Rovio’s interface Description of interface - Settings (Network tabs) Command Description Network tab Allows you to specify network options and settings Wi-Fi Settings Specify the wireless connection settings. SSID Specify the name of the wireless router (SSID) you will use with Rovio. Also, in Ad hoc mode, it indicates the name of the Ad hoc network to which you are connected. Refer to your router settings for reference. MAC Address Specify the MAC address of Rovio.
Overview of Rovio’s interface Description of interface - Settings (Network tab) Command Description IP Setup Allows you specify IP settings for your Rovio and router. Automatically Automatically select an IP address based on the from DHCP router’s DHCP settings. Select this option if you do not want to specify an IP address. NOTE: Selecting this option disables the options for manually setting Rovio’s IP address (i.e. Rovio IP address, Subnet mask, Default gateway, and DNS options).
Overview of Rovio’s interface Description of interface - Settings (Network tab) Command Description Domain tab Allows you to specify a dynamic domain name system. Refer to section Using a domain name with Rovio for more information. Enable Toggle whether you to want to use a dynamic domain name system to access Rovio. Server Specifies the server. Domain Specifies the domain name. Username Specifies the username for your account. Password Specifies the password for your account.
Overview of Rovio’s interface Description of interface - Settings (System tab, Rovio online help) Command Description System tab Allows you to reboot Rovio, restore system defaults, and update Rovio’s firmware. Reboot system Click on the Reboot button to reboot Rovio. Restore Default Settings Click on the Restore button to restore default settings to Rovio. Update Firmware Image Allows you to update the Rovio firmware. Refer to Updating the Rovio firmware for more information.
Accessing the interface from your internal network Command Description Save Current Image As Allows you to save screen capture in JPEG format. Start/Stop Mic Toggle the microphone on your computer. To save the screen capture, select this option, then name and save the file to your computer. NOTES: This option only available on Internet Explorer on a PC (i.e. supports two-way audio streams). You should avoid using your computer microphone in the same room as Rovio as it will create audio feedback.
Using Rovio from an external network Setting up port forwarding Using Rovio from an external network To be able to use Rovio outside your internal network, you will need to set up port forwarding on your wireless router to be able to communicate with Rovio. Setting up port forwarding To be able to access Rovio over the internet from any internet access point, you will need to open up the required ports on your router (port forwarding). Refer to your router’s user manual on how to set up port forwarding.
Using a domain name with Rovio 4. Save your router’s port forwarding settings. 5. Test your configuration using a computer or other web-enabled device outside your internal network. You can also test your Rovio using port forwarding tools. Refer to the WowWee Support site for more details. Your Rovio is now set up for access outside your internal network.
Using a domain name with Rovio Once your ports are set up for forwarding, you can log onto Rovio to set up your domain name. To set up your domain name to be used with Rovio: 1. From the Rovio interface, select Settings, then select the Domain tab. 2. On the Domain tab, enable the Enable option. 3. Enter the server information for your domain in the Server field. 4. Enter the domain name information for your domain in the Domain field (for example, abc.myrovio.com). 5.
Creating, saving and playing back paths Creating, saving and playing back paths You can create a path for Rovio to remember and play back. To create a path: 1. On the Paths tab in the Rovio interface, click on the Record button to begin recording your path. 2. Drive your Rovio to the location you want the path to be. Click on Stop to make Rovio stop in its path. 3. When you are done recording the path, click on the Save Path button to stop recording and save the path.
Using Rovio with VoIP applications Using Rovio with VoIP applications You can use Rovio as your mobile webcam with VoIP applications in Windows® XP™ or Windows® Vista on PC platforms (such as Skype™ or Windows Live Messenger Call) after you install the Rovio Setup software; this allows you to use Rovio for streaming video. You first need to configure your application to use Rovio as your webcam in video chats. NOTE: When you use Rovio for your VoIP webcam, there is no audio stream.
Updating the Rovio firmware Updating the Rovio firmware When firmware updates are available, you can download them and update the Rovio. NOTES: Ensure that Rovio is on and connected to your network. Also make sure that Rovio has enough battery power before updating it. All your settings will be overwritten when you update the firmware image. You will need to manually reconfigure them after updating firmware.
Restoring Rovio to factory defaults Restoring Rovio to factory defaults You can restore Rovio to its factory defaults, including its firmware, using the Rovio interface or the Rovio Restore wizard (using a PC), for instance, if you need to change the security settings. To do so: • From the Program Files directory, locate and run the Rovio Restore wizard (on a PC) and then follow the onscreen instructions. OR 1. In the Rovio interface, click on the Settings button. 2. Select the System tab. 3.
Caring for Rovio Safety Caring for Rovio This section outlines various precautions, instructions and warnings on caring for Rovio. Precautions Before using this product, read this user manual and retain it for future reference. Safety This product has been designed with the highest concern for safety. However, note that any electrical device if used improperly has the potential of causing fire, electrical shock or personal injury.
FAQs FAQs This section lists frequently asked questions about Rovio. Q: I clicked on the Home button, but Rovio can’t seem to find its charging dock properly. What’s wrong? A: There are number of reasons why Rovio can’t find its home base properly including: • You did not properly set Rovio’s home base to begin with. Verify that you have saved Rovio’s home base first. • Obstacles in the way. • The charging dock is not properly placed. • The navigation signal is too weak or there is no signal.
Appendix A Rovio browser and platform compatibility For more answers to questions, refer to www.myrovio.com or the WowWee Support site at www.wowweesupport.com.
Appendix B Terminology Appendix A Rovio browser and platform compatibility This table outlines Rovio browser and platform compatibility. Safari o o o o embedded browser o Mobile devices with Mozilla Firefox o Nintendo Wii Mac computer * iPhone/ Pod Touch PC computer Internet Explorer x Opera Internet browser Platform √o o o o x = Two-way mono audio streaming* and MPEG4 video streaming. o = Supports M-JPEG (motion JPEG) streaming. No audio.
Index Index A accounts managing 32 ActiveX 46, 48 Ad hoc 48 Ad hoc setup Mac users 17 PC users 16 administrative privileges 17 aspect ratio 28 audio levels output 28 audio stream troubleshooting 46 B batteries charging 14 installing 13 battery indicator 29 requirements 10 brightness 28, 30 browser compatibility 47 browsers Internet Explorer 47 Mozilla Firefox 47 Opera 47 Safari 47 supported features 23 C channel Wi-Fi 33 charging dock 14, 21 assembling 10–11 location 10 overview 9 powering 11, 12 setup
Index N navigation signal strength 29 network settings 33 O obstacle detection 31 Opera 47 P package contents 7 paths 27 creating 41 deleting 27, 41 deleting all saved 27 interrupting driving 27 playing back 41 recording 27 renaming 41 saving 27 platform compatibility 47 port 80 38 port 554 38 port forwarding 38 Ports definition 48 power requirements 10 power switch 22 proxy server 40 R Room Beacon.
Limited warranty WOWWEE 180-DAY LIMITED WARRANTY WowWee’s warranty obligations for this Rovio (this “Product”) are limited to the terms set forth below. WowWee Group Limited (“WowWee”) warrants to the original end-user purchaser that this Product will be free from defects in materials and workmanship under normal use for a period of 180 days from the date of retail purchase (the “Warranty Period”). This warranty is extended only to the original end-user purchaser of a new product that was not sold “as is”.
Limited warranty For more information on Rovio, go to www.myrovio.com If you have any questions that are not answered in this manual, refer to www.wowweesupport.com To see the full range of WowWee products, go to www.wowwee.com Register your Rovio at www.wowwee.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. For these purposes, the party responsible is: WowWee USA Inc.
