User's Manual

Make the world safe&smart
Version：V1.1 UT-206Z www.woxuwireless.com
5 / 8
2.4 Enter Test Mode & Warning Mode
LED2 Green Blink
Press and Hold BUTTON for 3sec,LED2Green light turns ON. Recommended working hours≤10hr.
LED indication：LED2 Green Blink.
2.5 Non-range Mode（Manager Access）
LED2 Green Blink Not bright
Unable to power off when bracelet in working mode. Can set to non-range mode to stop vibration alert or
extended standby time.
Instructions：Press Red BUTTONonce, interval 1sec, then press and hold for 3sec, till LED2 Green Light Blink
slowly.
Now bracelet ONLY collect and transfer data. No ranging. No vibration.
LED indication：Transferring of data, LED2Green blink slowly. After data transferred completed, LED2 light will
off.
2.6 Whitelist
Press and Hold two or more bracelets for 3sec within the alert range to set whitelist. The bracelets will
not have alert within 1hr after whitelisting. After 1hr, bracelets will resume back to working mode.