Instruction manual

PV820/PV830 Pneumatic PicoPump

World Precision Instruments 3

Parts List

After unpacking, verify that there is no visible damage to the instrument. Verify that

all items are included:

(1) PicoPump (PV820 or PV830)

(1) 3316 Startup Kit, which includes:

• (1) 0.25” female NPT ﬁ tting for nitrogen tank regulators (Fig. 3.)

• (1) Suction connector, silicone (Fig. 4.)

• (1) 5’ length of hard pressure tubing,

4”

OD. (Cut it in half to make pressure and

vacuum lines.)

(1) 5430-ALL PicoNozzle Kit (Fig. 5) which includes:

• (2) PicoNozzle tip assemblies (Handle diameter is 6.25 x 100mm.)

• (2) 5’ tubing

• (4) 1.0mm pipette gaskets (green)

• (4) 1.2mm pipette gaskets (black)

• (4) 1.5mm pipette gaskets (red)

• (4) 1.65mm pipette gaskets (white)

(1) Instruction Manual

Fig. 2—(Left) The PV830 Startup kit includes tubing and several ﬁ ttings.

Fig. 3— (Right) The 1/4” female, NPT, quick-connect, threaded ﬁ tting is for a nitrogen

regulator. Depress the plastic collar to remove tubing.

Fig. 4— Use the silicone suction connector to join hard tubing to an air or vacuum pump.