Instruction manual

PV820/PV830 Pneumatic PicoPump
World Precision Instruments 5
To mount the micropipette, pulled capillary glass may be inserted in the holder. A screw
cap allows the glass micropipette to be fi rmly held by a rubber gasket. The luer fi ttings
make changing micropipettes easy by allowing quick removal of the pipette holder from
the 4˝ luer lock adapter. Test to make sure the micropipette is fi rmly held by pulling on it.
Unpacking
Upon receipt of this instrument, make a thorough inspection of the contents and check
for possible damage. Missing cartons or obvious damage to cartons should be noted on
the delivery receipt before signing. Concealed damage should be reported at once to the
carrier and an inspection requested. Please read the section entitled “Claims and Returns”
on page 27 of this manual. Please contact WPI Customer Service if any parts are
missing at 941.371.1003 or [e-mail].
Returns: Do not return any goods to WPI without obtaining prior approval (RMA #
required) and instructions from WPI’s Returns Department. Goods returned (unauthorized)
by collect freight may be refused. If a return shipment is necessary, use the original
container, if possible. If the original container is not available, use a suitable substitute
that is rigid and of adequate size. Wrap the instrument in paper or plastic surrounded
with at least 100mm (four inches) of shock absorbing material. For further details, please
read the section entitled “Claims and Returns” on page 27 of this manual.