User manual

8. Brief description

The RolloTron Standard is a roller shutter drive designed for

use inside. The unit is installed as a ush-mounted device.

The power supply is provided via the enclosed connecting

cable with plug or a xed installed lead.

Features and

control options:

◆ Manual operation (MANU)

◆ Automatic mode (AUTO), with a separate switching

time for UP ( ▲ ) and DOWN ( t )

◆ AUTO/MANU - switchover

◆ Automated solar function

◆ Automatic darkness function

◆ End point setting

◆ Permanent storage of the settings

◆ Obstacle detection

◆ Overload cut-o

◆ Soft-start and Soft-stop

Obstacle detection

The movement of the belt is monitored. If the roller shutters

hit an obstacle in the DOWN ( t ) direction, the belt will stop

moving and the belt winder is switched o.

Once the system has switched o, it is no longer

possible to directly operate the drive in the same

direction.

Run the belt winder back in the opposite direction and

remove any possible obstacle. Subsequently it is possible

to operate the drive in the original direction again.

NOTE

Please ensure that the belt winds evenly during its sub-

sequent cycle after the obstacle detection system has

triggered.

Overload cut-o

The RolloTron Standard is equipped with an overload

cut-o system.

If the drive jams in the UP ( ▲ ) cycle (for example, due to

ice), the belt winder will also switch o. Once the cause

for the overload has been rectied, the drive will be fully

operational in both directions.

Soft-start / Soft-stop

The RolloTron Standard is equipped with a Soft-start and

Soft-stop function. Gentle starting and stopping serves to

protect the belt winder mechanics and the belt.