User manual
30
EN
19. Erase all settings, software reset
If necessary, you can erase all of your settings and return the
RolloTron Standard system to its original factory settings.
1.
+ + + Simultaneously press and
hold the buttons for 4
seconds.
2.
Release the buttons...,
◆ ... subsequently all of the settings will be deleted.
(end points / switching times / automated solar
function / automatic darkness control)
3.
All of the LEDs ash red by way of conrmation.
20. Carry out hardware reset
A hardware reset can be carried out in the event that the
RolloTron Standard fails to react to commands.
◆ A hardware reset causes the internal power supply to
the RolloTron Standard to be briey interrupted.
◆ The opening and closing times must be recongured
accordingly. All other settings are retained.
IMPORTANT
Never press the reset button when the motor is running,
as otherwise the end points will be modied.
1.
Press the Reset button using a sharp
object (e.g. a paper clip).