User manual

74
EN
16. Erase all settings, software reset
If necessary, you can erase all of your settings and
return the RolloTron Basic 1100 system to its original
factory settings.
1. Remove the cover plate from the lower assembly
screws and setting buttons.
i
2. + +
SO
WI
Simultaneously press and hold the
buttons for 4 seconds.
3. The indicator light ashes rapidly.
4. Release the buttons, subsequently all of the settings
will be deleted.
◆ End points
◆ Timer periods
5. The indicator light will go o once the button is re-
leased.