Instructions

49
EN
30
29
(21)
8.4 Connecting a cord-switch setting unit for the manual
adjustment of end points
1. Open the terminal contacts by pressing the plung-
ers and connect all of the wires of the motor cable
(15) corresponding to their functions,
see also figure [ 23 ]:
Plunger
Pin assignment:
SET
Motor connecting cable > cord-switch
setting unit
L1 (black) > ON (black)
L1 (brown) > SET (white)
N Neutral terminal (blue) > N (blue)
PE Earth (green/yellow) > PE (green/yellow)
= direction of travel 1
= direction of travel 2
= no function
ON