Instructions

41
EN
(10)
(18)
5
6
(8) (19)
(7)
7
8
(7)
7.4 Mounting / dismantling the adapter (10)
Mounting the adapter (10)
1. Slide the adapter (10) over the magnetic ring (18)
on the drive head until it engages. In doing so, check
the correct positioning of the groove in the adapter
(10) (original factory settings).
7.5 Mounting /dismantling the drive adapter (8)
Dismantling the drive adapter (8)
1. Release the retaining clip (7) from the gear drive shaft
(19) and pull the drive adapter (8) off again.
Mounting / dismantling the drive adapter (8)
1. Slide the drive adapter (8) onto the gear drive shaft
(19) until it can go no further and secure it with the
retaining clip provided (7) (original factory settings).
Dismantling the adapter (10)
1. Press the two retaining springs on the magnetic ring
(18) downwards and pull the adapter (10) off the
magnetic ring (18).
Press the retain-
ing springs
downwards.