Instructions

43
EN
1
13
12
14
15
16

1
RolloTube C-line Small
RolloTube C-line Medium
2. Saw a groove in the end of the precision tube 1
in order that the cam  of the adapter (10) can
be completely pressed into the tube.
7.7 Preparation for use of the precision tubes
◆ There may not be any play between the groove
1 and the cam .
◆ The dimensions for the groove 1 are depend-
ent on the tubular motor type used, see figures.
3. Slide the tubular motor into the precision tube.
4. Mark the four fastening holes and subsequently
drill them through the precision tube into the drive
adapter (8).
◆ Never drill deeper than 10 mm into
drive adapter (8).
ATTENTION!
Drilling in the area of the drive causes serious
damage.
◆ Never drill in the area of the drive (9).
5. Screw or rivet the precision tube to the drive
adapter (8).
Use four self-tapping sheet metal screws or four
pop rivets for this.