User manual

EN
54
Connect / disconnect the DuoFern central operating unit with the radio code
Each DuoFern transmitter that is required for operation has to be assigned to the tubular motor in order that the radio tubular motor can be
controlled with a DuoFern transmitter.
OK
OK
OK
M
Select the “Radio Code” menu on the DuoFern central operating unit:
M
Main menu
System settings
2 Radio settings
2
.
2 Radio code
Confirm selection.
Enter the six-character radio code of the DuoFern tubular motor and confirm each figure (see enclosed sticker).
If necessary you can jump back to the previous figure to correct it.
Upon confirmation of the last figure you can activate ...
Button
... connect mode
or
disconnect mode on the radio tubular motor.
OK
OK
Select menu “2
.
,1 Connect/disconnect” on the central operating unit.
Activate function “
2
.
,1 Connect/disconnect” on the central operating unit.
The number of logged on actuators is indicated on the display (e. g. 0 in the event of initial installation).
Exit the menu.
1.
M
OK
2.
3.a
3.b
4.
5.
6.
7.
8.
Display