User manual

EN
35
Functional description
i
The RADEMACHER DuoFern RolloTube Intelligent Radio series of tubular motors are designed
for opening and closing roller shutters and awnings.
The internal DuoFern interface enables the motor to be integrated into a DuoFern radio
network, making it possible to configure and control many automatic functions remotely
with the help of a DuoFern transmitter (e.g. the DuoFern central operating unit).
An additional switch can be connected to the tubular motor locally in order to enable
manual operation.
These tubular motors are equipped with the new Safe-Drive system for position detection,
torque monitoring and obstacle detection. The drive’s compact design and fully automatic
end point configuration ensures for straightforward and convenient installation.
The RolloTube Intelligent Radio series impresses in daily operation with automatic roller
shutter compensation as well as the blockage and obstacle detection system (with reversing
function), ensuring maximum safety and gentle operation.
General tubular motor functions:
◆ Commissioning with a single run command. Self-learning motor with fully automatic
end point configuration.
◆ Safe-Drive method for precise positioning, torque monitoring and obstacle detection.
◆ Blockage and obstacle detection including reversing function.
◆ Obstacle detection can be arbitrarily configured thanks to the new snap-in FlexiClick
system.
◆ Maintenance free end points thanks to automatic shutter length compensation system.
◆ Quick and easy installation thanks to the new shorter design.
◆ Optionally available: Universal RT ConfigTool for individual configuration of the
motor parameters.
Short description of the DuoFern radio system
The DuoFern radio system enables bidirectional data exchange between the various
participants of a DuoFern radio network. All of the switching commands from the DuoFern
transmitter (e.g. DuoFern central operating unit) are received and acknowledged by the
DuoFern components (actuators / sensors), insofar as both devices are interconnected.
Tubular motor functions in combination with DuoFern transmitters
DuoFern environmental sensor; Item no 3200 00 64
DuoFern manual central operating unit; Item no 3481 00 60
RolloTron Pro Comfort DuoFern; Item no 1523 45 11
DuoFern manual transmitter standard; Item no 3248 03 66
Manual control (on/off)
● ● ●
AUTO/MANU - switchover
● ●
Timed program
● ●
Timer on / off
● ●
Random function
● ●
Twilight program (mornings)
● ●
Twilight program (evenings)
● ● ●
Darkness control
(mornings and evenings) on / off
● ●
Solar program
● ●
Automatic solar function on / off
● ●
Set solar position
●
Wind program
●
Automatic wind function on / off
●
Set direction of rotation for wind
●
Rain program
●
Automatic rain function on / off
●
Set direction of rotation for rain
●
Set ventilation position
●
Set direction reversal
● ●
Start connection test
● ●
End point adjustment radio controlled
● ●
Radio code support
(e. g. log on and log off with radio code)
●
The tubular motor stops and automatically shifts into the opposite
direction (reversing) in the event that an obstacle is detected while
opening (e.g. if a roller shutter is iced-up).
NOTE
Do not move iced-up roller shutters and rectify the fault or remove the obstacle.
Blockage detection function
i
The tubular motor stops and automatically shifts briefly in the opposite
direction (reversing) in the event that the roller shutter hits an obstacle
while closing.
Obstacle detection function
i
Requirements for correct obstacle detection:
◆ The catch with freewheel mechanism must be mounted (see Fig. 4.a, page 38).
◆ The roller shutter must be mounted to the rotating union with the fastening springs
or with the fixed shaft connector.
◆ Roller shutters must always run vertically in the guide rails of the window.