Instructions

3434
EN
Short description of the DuoFern Standard manual transmitter
i
The DuoFern wireless system enables bidirectional data exchange between the various participants
of a wireless network. All switching commands from a DuoFern transmitter will be confirmed by the
DuoFern receivers.
Using the DuoFern Standard manual transmitter you can manually remotely control various DuoFern
devices (e. g. RolloTron Comfort/Standard DuoFern or DuoFern actuators for lighting).
Command buttons
With the aid of the three command buttons, UP (on/off)/STOP (off) / DOWN (on/off), see page 30, you
can transmit manual switching commands to the registered DuoFern end devices.
Device buttons or group buttons (only for item nos. 3248 03 66)
DuoFern Standard manual transmitter 3248 03 66 has 6 device or group buttons (see page30) which
you can allocate to any DuoFern end device (see table on page 35). In this way it is possible to have an
individual as well as a group control of various devices (see page 37).
Connect button
You can call up the following functions with the connect button:
◆ Registering mode Register DuoFern end device on manual transmitter.
◆ Reversal of rotational direction. Reverse rotational direction of tubular motor or switchover between
the devices and the lighting function.
◆ Purge Delete the connection between manual transmitter and actuators
that no longer exist.