DE Elektrischer Rollladen-Gurtwickler RolloTron Basis DuoFern1200 EN Electronic Roller Shutter Belt Winder RolloTron Basic DuoFern 1200 Original Betriebs- und Montageanleitung..........................................................................................1 Translation of the Original Operating and Assembly Manual................................................... 49 Artikel-Nr. : / Item No.: 1823 45 11 VBD 696-1 (08.
i Sehr geehrte Kunden ... ...mit dem Kauf des RolloTron Basis DuoFern 1200 haben Sie sich für ein Qualitätsprodukt aus dem Hause RADEMACHER entschieden. Wir danken Ihnen für Ihr Vertrauen. Dieser Rollladen-Gurtwickler ist sowohl unter Aspekten des größten Komforts und der optimalen Bedienbarkeit als auch unter Gesichtspunkten der Solidität und Langlebigkeit entstanden. Mit einem kompromisslosen Qualitätsanspruch und nach langen Versuchsreihen sind wir stolz, Ihnen dieses innovative Produkt zu präsentieren.
i Inhaltsverzeichnis i DE Sehr geehrte Kunden ...................................................2 10. Das Gurtband einführen und befestigen...............25 1. Diese Anleitung ............................................................4 11. Den RolloTron Basis DuoFern 1200 einbauen.......27 1.1 Anwendung dieser Anleitung............................................ 4 12. Endpunkte einstellen.................................................28 2. Gefahrensymbole............................
i DE 1. Diese Anleitung ... ...beschreibt Ihnen die Montage, den elektrischen Anschluss und die Bedienung des Rollladen-Gurtwicklers RolloTron Basis DuoFern 1200. i 1.1 Anwendung dieser Anleitung ◆◆ Bitte lesen Sie diese Anleitung vollständig durch und beachten Sie alle Sicherheitshinweise, bevor Sie mit den Arbeiten beginnen. ◆◆ Lesen Sie auch die Gebrauchsanleitungen des Zubehörs (zum Beispiel des HomePilot®) falls vorhanden.
i DE 2.1 Gefahrenstufen und Signalwörter VORSICHT! GEFAHR! Diese Gefährdung wird zu schweren Verletzungen oder zum Tode führen, sofern sie nicht vermieden wird. Diese Gefährdung kann zu geringfügigen bis mittelschweren Verletzungen führen, sofern sie nicht vermieden wird. WARNUNG! Diese Gefährdung kann zu schweren Verletzungen oder zum Tod führen, sofern sie nicht vermieden wird. i ACHTUNG! Diese Gefährdung kann zu Sachschäden führen. 2.
i DuoFern Hinderniserkennung ◆◆ RADEMACHER Funk-Technik zur Steuerung kompatibler Produkte. ◆◆ Trifft der Rollladen bei der AB ( t )-Bewegung auf ein Hindernis, wird der RolloTron Basis DuoFern 1200 ausgeschaltet, s. Seite 11. WR Config-Tool ◆◆ RADEMACHER Software zur Programmierung des DuoFern Systems inkl. automatischem SoftwareUpdate für die DuoFern Handzentrale. HomePilot® ◆◆ Der HomePilot® ist eine zentrale Steuereinheit für RADEMACHER Funk-Produkte.
i DE 3. Lieferumfang Lieferumfang b) c) a) 1 x RolloTron Basis DuoFern 1200 b) 2 x Montageschrauben (4 x 55 mm) a) c) 1 x Entriegelungsklammer (im Gehäuse) d) d) 1 x Anschlusskabel mit Eurostecker e) 1 x Wickelradfachabdeckung f) 1 x Abdeckblende g) 1 x Zugentlastung inkl. Montageschrauben h) 1 x Gebrauchsanleitung (ohne Abbildung) e) f) Vergleichen Sie nach dem Auspacken ... den Packungsinhalt mit diesen Angaben.
i 4.
i Pos. Symbol Beschreibung 1) 2) Auf-/Stopp-Taste + Ab-/Stopp-Taste Der Rollladen fährt Auf / Ab oder stoppt + Kontrollleuchte - Statusanzeige 3) grün 1) rot 2) 3) 6) 5) 5) 6) kurzes Blinken ◆◆ Verbinden ist aktiv ◆◆ Beim Einstellen der Sonnenposition konstantes Leuchten ◆◆ 5 Sek. = Verbinden / Trennen war erfolgreich ◆◆ 5 Sek. = Aufräumen war erfolgreich kurzes Aufblitzen ◆◆ Rückmeldung beim Drücken der Einstelltasten kurzes Blinken ◆◆ ◆◆ ◆◆ ◆◆ konstantes Leuchten ◆◆ 5 Sek.
i Der RolloTron Basis DuoFern 1200 ist ein elektrischer Rollladen-Gurtwickler für den Innenbereich. Die Montage erfolgt als Unterputzgerät. Die Stromversorgung erfolgt über das beiliegende Anschlusskabel mit Netzstecker oder bei Bedarf über eine fest verlegte Zuleitung.
i DE 5.1 Beschreibung der Sicherheitsfunktionen Hinderniserkennung Überlastsicherung Die Bewegung des Gurtbandes wird überwacht. Trifft der Rollladen bei der AB ( t )-Bewegung auf ein Hindernis, bewegt sich das Gurtband nicht mehr und der RolloTron Basis DuoFern 1200 wird ausgeschaltet. Der RolloTron Basis DuoFern 1200 ist gegen Überlastung geschützt. i Nach der Abschaltung ist ein direkter Betrieb in die gleiche Fahrtrichtung nicht möglich.
i DE 5.2 Funktionstabelle im DuoFern Netzwerk DuoFern HomePilot® DuoFern Umweltsensor DuoFern Handzentrale * WR ConfigTool mit DuoFern Handzentrale RolloTron Comfort DuoFern / Troll Comfort DuoFern DuoFern Handsender Standard DuoFern Wandtaster DuoFern Fenster/Türkontakt Funktion Wertebereich Auf / Stopp / Ab Werkseinstellung - 2. Direktes Anfahren einer %-Position 0 - 100 % - 3. Manuellbetrieb ein / aus ein / aus aus 4. Zeitautomatik ein / aus 1.
i DE 6.
i DE 6.1 Abmessungen RolloTron Basis DuoFern 1200 Artikel-Nr.
i DE 6.2 Zulässige Rollladen-Gurtbänder i ACHTUNG! Die Verwendung zu langer Gurtbänder kann zur Beschädigung des RolloTron Basis DuoFern 1200 führen. Die Angaben sind Richtwerte und gelten für eine ideale Einbausituation. Auf Grund von bauseitigen Gegebenheiten können die Werte abweichen. Verwenden Sie nur Gurtbänder in den zulässigen Längen. Tabelle 1: Zulässige Rollladen-Gurtbänder RolloTron: Artikel-Nr.
i 7. Sicherheitshinweise Der Einsatz defekter Geräte kann zur Gefährdung von Personen und zu Sachschäden führen (Stromschlag, Kurzschluss). ◆◆ Verwenden Sie niemals defekte oder beschädigte Geräte. ◆◆ Prüfen Sie den RolloTron Basis DuoFern 1200 und das beiliegende Netzkabel auf Unversehrtheit. ◆◆ Wenden Sie sich bitte an unseren Kundendienst (s. Seite 48), falls Sie Schäden am Gerät feststellen. Bei unsachgemäßem Gebrauch besteht erhöhte Verletzungsgefahr.
i 7. Sicherheitshinweise Das Überschreiten der maximal zulässigen Laufzeit (KB) kann zur Überlastung und zur Beschädigung des RolloTron Basis DuoFern 1200 führen. ◆◆ Die maximal zulässige Laufzeit für eine Fahrt darf im Betrieb nicht überschritten werden. Der RolloTron Basis DuoFern 1200 verfügt dazu über eine Laufzeitbegrenzung (KB) von vier Minuten. ◆◆ Hat die Laufzeitbegrenzung angesprochen, muss der RolloTron Basis DuoFern 1200 mindestens 12 Minuten lang abkühlen.
i DE 7.1 Bestimmungsgemäße Verwendung Verwenden Sie den RolloTron Basis DuoFern 1200 nur zum Heben und Senken von Rollläden mit zulässigem Gurtband. i Mechanische Verriegelungen jeder Art sind für den automatisierten Betrieb mit diesem Gerät nicht geeignet. Verwenden Sie nur Original-Ersatzteile von RADEMACHER. ◆◆ Sie vermeiden so Fehlfunktionen bzw. Schäden am RolloTron Basis DuoFern 1200.
i 7.2 Nicht bestimmungsgemäße Verwendung Die Verwendung des RolloTron Basis DuoFern 1200 für andere als den zuvor genannten Anwendungsbereich ist nicht zulässig. DE Bei Verwendung des RolloTron Basis DuoFern 1200 im Außenbereich besteht Lebensgefahr durch Kurzschluss und Stromschlag. ◆◆ Montieren und betreiben Sie den RolloTron Basis DuoFern 1200 niemals im Außenbereich. i 7.
i DE 8. Sicherheitshinweise zur Montage Eine schlechte Gurtbandführung kann das Gurtband zerstören und den RolloTron Basis DuoFern 1200 unnötig belasten. ◆◆ Montieren Sie den Gurtwickler so, dass das Gurtband möglichst senkrecht in das Gerät einläuft, Sie vermeiden dadurch unnötige Reibung und Verschleiß. i Um einen optimalen Betrieb zu gewährleisten, sollten Sie der RolloTron Basis DuoFern 1200 nicht in der Nähe von metallischen Gegenständen montieren.
i 8.2 Montagevorbereitungen DE 1. Maß nehmen. Prüfen Sie, ob der Gurtkasten ausreichend Platz für den RolloTron Basis DuoFern 1200 bietet. 2. Den alten Gurtwickler ausbauen, falls Sie eine bestehende Rollladenanlage umrüsten. 2.1 Lassen Sie dazu den Rollladen ganz herunter, bis die Lamellen vollständig geschlossen sind. 2.2 Bauen Sie den alten Gurtwickler aus und wickeln Sie das Gurtband ab. VORSICHT! Es besteht Verletzungsgefahr durch die vorgespannte Feder im alten Gurtwickler.
i DE 8.2 Montagevorbereitungen 3. Das Gurtband vorbereiten. 3.1 Schneiden Sie das Gurtband ca. 20 cm unterhalb des Gurtkastens ab. und schneiden Sie in die Mitte einen kurzen Schlitz. So können Sie später das Band auf dem Wickelrad einhaken. 20 cm 3.2 Schlagen Sie das Ende des Gurtbandes ca. 2 cm um Empfehlung Das Gurtband muss möglichst gerade und leicht laufen.
i 9. Sicherheitshinweise zum elektrischen Anschluss GEFAHR! Bei Berührung von elektrischen Komponenten besteht Lebensgefahr durch Stromschlag. i DE Der elektrische Anschluss kann sowohl mit dem beiliegenden Anschlusskabel als auch über eine vor Ort fest verlegte Zuleitung erfolgen. ◆◆ Führen Sie alle Montage- und Anschlussarbeiten im spannungslosen Zustand durch. ◆◆ Trennen Sie die Zuleitung allpolig vom Netz und sichern Sie sie gegen Wiedereinschalten.
i 9.1 Das Anschlusskabel am RolloTron Basis DuoFern 1200 anschließen DE 1. Schließen Sie das beiliegende Anschlusskabel an die Anschlussklemmen des RolloTron Basis DuoFern 1200 an. Die Farbbelegung ist für diesen Anschluss nicht relevant. WARNUNG! Anschlussklemmen Ein beschädigtes Anschlusskabel kann einen Kurzschluss verursachen. ◆◆ Achten Sie auf eine sichere Verlegung des Anschlusskabels.
i DE 10. Das Gurtband einführen und befestigen 1. Stecken Sie den Netzstecker in die Steckdose. VORSICHT! Es besteht Verletzungsgefahr durch das Wickelrad. Fassen Sie nicht bei laufendem Motor in das Wickelradfach. 2. i Drücken Sie die Auf-Taste solange, bis der Befestigungshaken im Wickelradfach gut erreichbar ist. Wickelradfach Da noch keine Endpunkte eingestellt sind, bleibt der Antrieb stehen, sobald Sie die Taste loslassen. Befestigungshaken 3.
i DE 10. Das Gurtband einführen und befestigen 4. Führen Sie anschließend das Gurtband von oben in Gurtbandverlauf im Gerät den RolloTron Basis DuoFern 1200 ein. Führen Sie das Gurtband - wie in der Schnittdarstellung gezeigt - durch das Gerät und schieben Sie es von oben über den Befestigungshaken. 5. Stecken Sie den Netzstecker erneut in die Steckdose. 6. Drücken Sie die Auf-Taste solange, bis sich das Gurtband einmal ganz um das Wickelrad gewickelt hat. 7.
i 11. Den RolloTron Basis DuoFern 1200 einbauen DE Bauen Sie den RolloTron Basis DuoFern 1200 möglichst gerade ein, damit sich das Gurtband korrekt aufwickeln kann. Achten Sie darauf, dass der RolloTron Basis DuoFern 1200 frei im Gurtkasten sitzt und nicht am Mauerwerk anliegt, es kann sonst zur Geräuschbildung kommen. 1. Schieben Sie den RolloTron Basis DuoFern 1200 in den Gurtkasten und schrauben Sie ihn mit den beiliegenden Schrauben fest.
DE 12. Endpunkte einstellen Wichtige Hinweise zur Einstellung der Endpunkte Damit der Rollladen oben und unten an der von Ihnen gewünschten Stelle stehenbleibt, müssen die Endpunkte eingestellt werden. Sie müssen unbedingt beide Endpunkte einstellen, sonst kann es zu Funktionsstörungen kommen. i Ohne Endpunkteinstellung läuft der RolloTron Basis DuoFern 1200 nur solange, wie eine der beiden Bedientasten gedrückt wird. Ohne Endpunkteinstellung bleiben die Automatikfunktionen gesperrt.
DE 12. Endpunkte einstellen Den unteren Endpunkt einstellen 3. + Die Tasten gleichzeitig drücken und festhalten. (rot) Der Rollladen fährt runter und die Kontrollleuchte blinkt rot. 4. i Achten Sie beim Einstellen des unteren Endpunktes darauf, dass das Gurtband beim Erreichen des Endpunktes nicht zu schlaff wird. i Nach einiger Zeit müssen Sie eventuell die Endpunkte neu einstellen, da es im laufenden Betrieb zu einer Verlängerung des Gurtbandes kommen kann.
DE 13. Manuelle Bedienung Die Bedienung von Hand ist in jeder Betriebsart möglich und hat Vorrang vor den programmierten Automatikfunktionen. 1. Den Rollladen öffnen. Der Rollladen fährt nach einem kurzen Tastendruck bis zum oberen Endpunkt. 2. 3. oder Den Rollladen zwischenzeitlich stoppen. Den Rollladen schließen. Der Rollladen fährt nach einem kurzen Tastendruck bis zum unteren Endpunkt.
14. Hinweise zum An- und Abmelden von DuoFern Sendern Damit Ihr RolloTron Basis DuoFern 1200 auf Schaltbefehle aus dem DuoFern Netzwerk reagieren kann, müssen Sie jeden gewünschten DuoFern Sender (z. B. DuoFern Handzentrale oder HomePilot®) am RolloTron Basis DuoFern 1200 anmelden. Lesen Sie dazu auch die Gebrauchsanleitung des jeweiligen DuoFern Senders. i DE Der RolloTron Basis DuoFern 1200 kann nicht mit einem anderen RolloTron Basis DuoFern 1200 verbunden werden.
DE 14.1 Anmelden von DuoFern Sendern 1. + Den Anmeldemodus aktivieren. Die Tasten gleichzeitig 4 Sekunden lang drücken. 4. Den nächsten DuoFern Sender anmelden. Dazu die Punkte 1. bis 2. wiederholen oder die Anmeldung beenden. (grün) Die Kontrollleuchte blinkt grün. Der Anmeldemodus bleibt ca. 60 Sekun den lang aktiv. 2. Den gewünschten DuoFern Sender in den Anmeldemodus schalten (s. jeweilige Gebrauchsanleitung). 3. Beachten Sie die Kontrollleuchte.
DE 14.2 Abmelden von DuoFern Sendern 1. + Den Abmeldemodus aktivieren. Die Tasten gleichzeitig 4 Sekunden lang drücken. 4. Den nächsten DuoFern Sender abmelden. Dazu die Punkte 1. bis 2. wiederholen oder die Abmeldung beenden. (rot) Die Kontrollleuchte blinkt rot. Der Abmeldemodus bleibt ca. 60 Sekun den lang aktiv. 2. Den gewünschten DuoFern Sender in den Abmeldemodus schalten (s. jeweilige Gebrauchsanleitung).
DE 14.3 Aufräumen im DuoFern Netzwerk Mit Hilfe dieser Funktion können Sie alle DuoFern Sender, die nicht mehr per Funk erreichbar sind, vom RolloTron Basis DuoFern 1200 abmelden. i Alle batteriebetriebenen DuoFern Sender (z. B. die DuoFern Handzentrale) können nicht mit dieser Funktion abgemeldet werden. Um alle DuoFern Sender abzumelden bzw. zu löschen, muss ein Software-Reset durchgeführt werden, s. Seite 39. 1. AUTO + Das Aufräumen aktivieren.
AUTO DE 15. Automatikbetrieb Der RolloTron Basis DuoFern 1200 unterstützt die folgenden Automatikfunktionen: ◆◆ ◆◆ ◆◆ ◆◆ Zeitautomatik Abenddämmerungsautomatik Morgendämmerungsautomatik Sonnenautomatik Die Automatikfunktionen müssen zuvor in der DuoFern Steuerung aktiviert werden Die Automatikfunktionen stehen nur zur Verfügung, wenn der RolloTron Basis DuoFern 1200 mit einer DuoFern Steuerung (z. B. DuoFern Handzentrale; HomePilot® etc.) verbunden wird, s.
AUTO Die Morgendämmerungsautomatik Die Lüftungsposition Die Morgendämmerungsautomatik bewirkt ein automatisches Öffnen des Rollladens bis zum oberen Endpunkt. Falls der Rollladen sich nicht bis zum unteren Endpunkt schließen soll, können Sie mit Hilfe dieser Funktion eine beliebige Position (z. B. als Lüftungsposition) festlegen. Die Steuersignale dazu kommen von einem DuoFern Sender aus dem DuoFern Netzwerk.
AUTO 1. 15.1 Alle Automatikfunktionen gemeinsam ein-/ausschalten Die AUTO-Taste eine Sekunde lang AUTO drücken. 2. Beachten Sie die Kontrollleuchte: rot blitzend Rückmeldung beim Drücken der Taste. Den Automatikzustand umschalten AUTO Die AUTO-Taste länger als eine Sekunde gedrückt halten. Den Automatikzustand abfragen AUTO rot leuchtend (10 Sekunden) Die Automatikfunktionen sind einge schaltet. DE Die AUTO-Taste kurz antippen.
DE 15.2 Die Sonnenposition einstellen 1. + Fahren Sie den Rollladen in die gewünsch te Position. 2. Speichern Sie die Sonnenposition. 2.1 + Drücken Sie dazu die beiden Tasten ca. 4 Sekunden lang. 2.2 Lassen Sie die Tasten nach 4 Sekunden wieder los und Beachten Sie die Kontrollleuchte: grün blinkend Die Sonnenposition ist gespeichert. 38 i Die Einstellung der Sonnenposition ist auch über das DuoFern Netzwerk möglich, z. B. mit dem HomePilot®.
i DE 16. Alle Einstellungen löschen, Softwarereset Bei Bedarf können Sie alle Einstellungen löschen und den Auslieferungszustand des RolloTron Basis DuoFern 1200 wieder herstellen. 1. Entfernen Sie die Abdeckblende von den unteren Montageschrauben und Einstelltasten. 2. + AUTO + Die Tasten gleichzeitig 4 Sekunden lang drücken. 3. (rot) Die Kontrollleuchte blinkt dabei schnell rot. 4.
i 17. Den RolloTron Basis DuoFern 1200 ausbauen (z. B. bei Umzug) 1. Entfernen Sie die Abdeckblende von den unteren Montageschrauben und Einstelltasten. 2. + AUTO + Alle Einstellungen löschen. Die Tasten gleichzeitig 4 Sekunden lang drücken. 3. Den Rollladen vollständig schließen. 4. Die Ab-Taste weiter drücken und halten. 5. Ziehen Sie dabei das Gurtband soweit wie möglich oben aus dem RolloTron Basis DuoFern 1200 heraus. 6.
i 17. Den RolloTron Basis DuoFern 1200 ausbauen (z. B. bei Umzug) DE 8. Entfernen Sie die Wickelradfachabdeckung. 9. Kontrollieren Sie die Position des Befestigungshakens. 10. Fahren Sie, wenn nötig, den Befestigungshaken in eine leicht zugängliche Position. VORSICHT! Es besteht Verletzungsgefahr durch das Wickelrad. ◆◆ Fassen Sie nicht bei laufendem Motor in das Wickelradfach. ◆◆ Ziehen Sie immer den Netzstecker, bevor Sie in das Wickelradfach fassen. 11.
i DE 18. Das Gurtband bei Geräteausfall entfernen Sollte der RolloTron Basis DuoFern 1200 einmal ausfallen und der Motor nicht mehr laufen, können Sie mit Hilfe der Getriebeentriegelung das Gurtband vollständig aus dem Gurtwickler ziehen, ohne es zerschneiden zu müssen. 1. Ziehen Sie den Netzstecker aus der Steckdose. 3. Entriegeln Sie das Getriebe mit Hilfe der beiliegenden Entriegelungsklammer. Beim Drücken müssen Sie einen kleinen Widerstand überwinden. 4.
i DE 19. Was tun, wenn... ? Störung Mögliche Ursache / Lösung ... der RolloTron Basis DuoFern 1200 keine Funktion Überprüfen Sie die Stromversorgung inkl. Anschlusskabel und zeigt? Anschlussstecker. ... der RolloTron Basis DuoFern 1200 zur einge stellten Schaltzeit nicht reagiert? Eventuell sind noch keine Endpunkte eingestellt, stellen Sie die Endpunkte ein, s. Seite 28. ...
i DE 19. Was tun, wenn... ? Störung Mögliche Ursache / Lösung ... der Rollladen im Tieflauf stehen bleibt? a) Der Rollladen ist eventuell auf ein Hinderniss gelaufen. Fahren Sie den Rollladen wieder hoch und entfernen Sie das Hindernis. b) Die Lamellen haben sich verschoben. Fahren Sie wenn möglich den Rollladen wieder hoch und richten Sie die Lamellen aus.
i DE 20. Hinweise zur Wartung und Pflege Wartung Pflege VORSICHT! Eine mangelhafte Wartung kann zur Gefährdung von Personen durch Beschädigung Ihres RolloTron Basis DuoFern 1200 und der Rollladenanlage führen. Sie können den RolloTron Basis DuoFern 1200 mit einem angefeuchteten Tuch reinigen. Verwenden Sie bitte keine aggressiven oder scheuernden Reinigungsmittel. ◆◆ Kontrollieren Sie bitte regelmäßig den RolloTron Basis DuoFern 1200 und alle Komponenten Ihrer Rollladen-anlage auf Beschädigung.
i DE 21.
i Hiermit erklärt die RADEMACHER Geräte-Elektronik GmbH, dass der RolloTron Basis DuoFern 1200 den Richtlinien 2006/42/EG (Maschinenrichtlinie) und 2014/53/EU (Funkanlagenrichtlinie) entspricht. i DE 22. Vereinfachte EU-Konformitätserklärung Der vollständige Text der EU-Konformitätserklärung liegt dem Produkt bei und ist beim Hersteller hinterlegt. RADEMACHER Geräte-Elektronik GmbH Buschkamp 7 46414 Rhede (Deutschland) 23.
i DE 24. Garantiebedingungen RADEMACHER Geräte-Elektronik GmbH gibt eine 36-monatige Garantie für Neugeräte, die entsprechend der Einbauanleitung montiert wurden. Von der Garantie abgedeckt sind alle Konstruktionsfehler, Materialfehler und Fabrikationsfehler. Ihre gesetzlichen Gewährleistungsansprüche bleiben von dieser Garantie unberührt.
DE Elektrischer Rollladen-Gurtwickler RolloTron Basis DuoFern 1200 EN Electronic Roller Shutter Belt Winder RolloTron Basic DuoFern 1200 Original Betriebs- und Montageanleitung..........................................................................................1 Translation of the Original Operating and Assembly Manual................................................... 49 Item No.: 1823 45 11 VBD 696-1 (08.
i Dear Customer, With your purchase of a RolloTron Basic DuoFern 1200, you have chosen a quality product manufactured by RADEMACHER. Thank you for the trust you have placed in us. This roller shutter belt winder has been designed to provide optimal convenience and operability as well as in terms of ensuring solidity and durability. Having applied uncompromising quality standards and thorough testing, we are proud to be able to present this innovative product to you.
i Table of Contents i EN Dear Customer,............................................................50 10. Drawing in and fastening the belt...........................73 1. These instructions.......................................................52 11. Installing the RolloTron Basic DuoFern 1200.........75 1.1 Application of this manual................................................52 12. End point adjustment.................................................76 2. Hazard symbols............
i EN 1. These instructions... ...describes how to install, connect the electrical system and operate your roller shutter belt winder RolloTron Basic DuoFern 1200. i 1.1 Application of this manual ◆◆ Before you begin, please read these instructions through completely and follow all the safety instructions. ◆◆ Please also read the instruction manuals of the accessories (e.g. of the HomePilot®), if available.
i EN 2.1 Levels of danger and signal words CAUTION! DANGER! This hazard will result in serious injury or death if not avoided. This hazard may result in minor or moderate injury if not avoided. WARNING! This hazard may result in serious injury or death if not avoided. i ATTENTION! This hazard may lead to property damage. 2.2 Symbols and depictions used Depiction Description 1. Steps to be taken 2.
i DuoFern Obstacle detection ◆◆ RADEMACHER radio technology for controlling compatible products. ◆◆ If the roller shutters hit an obstacle in the DOWN ( t ) direction, the RolloTron Basic DuoFern 1200 is switched off, see page 59. WR Config-Tool ◆◆ RADEMACHER software for programming the DuoFern system incl. automatic software update for the DuoFern manual central operating unit. HomePilot® ◆◆ The HomePilot® is a central controller unit for RADEMACHER radio products.
i EN 3. Included in delivery Included in delivery b) c) a) 1 x RolloTron Basic DuoFern 1200 b) 2 x Assembly screws (4 x 55 mm) a) c) 1 x Disengaging bracket (in housing) d) d) 1 x Connecting cable with Euro plug e) 1 x Reel compartment cover f) 1 x Cover plate g) 1 x Traction relief mechanism incl. assembly screws h) 1 x Instruction manual (not illustrated) e) f) After unpacking please check and compare... the contents of the package with the above specified.
i EN 4.
i Pos.
i The RolloTron Basic DuoFern 1200 is an electric roller shutter belt winder designed for use inside. The unit is installed as a flush-mounted device. The power supply is provided via the enclosed connecting cable with a mains plug or, if required, a fixed installed lead.
i EN 5.1 Description of the safety functions Obstacle detection Overload cut-off The movement of the belt is monitored. If the roller shutters hit an obstacle in the DOWN ( t ) direction, the belt will stop moving and the RolloTron Basic DuoFern 1200 is switched off. The RolloTron Basic DuoFern 1200 is equipped with an overload cut-off system. i Once the system has switched off, it is not possible to directly operate the drive in the same direction.
i EN 5.
i EN 6. Technical Specifications Power supply Operating conditions Supply voltage: 230 V ~ / 50 Hz Nominal power: 70 W Consumption: Standby: < 0.7 W Mechanical capacity: Nominal torque: 10 Nm Maximum speed: 30 rpm Maximum tractive force: See page 94 / Tractive force diagram Transient operation (KB): 4 minutes (maximum running time) Protection class: II Protection type: IP20 (only for use in dry rooms) Mains connecting cable: 2 x 0.
i EN 6.1 Dimensions RolloTron Basic DuoFern 1200 Item no.
i EN 6.2 Permissible roller shutter belts i ATTENTION! The RolloTron Basic DuoFern 1200 may be damaged if excessively long belts are used. The specifications are intended for guidance only and apply to an ideal installation situation. The actual values may vary due to local conditions. Only use belts of the permissible lengths. Table 1: Permissible roller shutter belts RolloTron: Item no.: Belt width: 23 mm (Standard belt) Basic DuoFern 1200 1823 45 11 Belt thickness: Maximum belt length 1.
i 7. Safety instructions The use of defective equipment can lead to personal injury and damage to property (electric shocks, short circuiting). ◆◆ Never use defective or damaged equipment. ◆◆ Check the RolloTron Basic DuoFern 1200 and the provided mains cable beforehand for damage. ◆◆ Should you discover damage to the equipment, please consult our customer service department (see page 96). Incorrect use leads to an increased risk of injury.
i 7. Safety instructions EN Exceeding the maximum permissible running time (KB) may overload and damage the RolloTron Basic DuoFern 1200. According to DIN EN 13659, it is necessary to determine that the movement conditions for the shutters are maintained in accordance with EN 12045. ◆◆ The maximum permissible running time for a cycle may not be exceeded when the equipment is in operation. For this reason, the RolloTron Basic DuoFern 1200 has a running time limit (KB) of four minutes.
i EN 7.1 Intended use Only use the RolloTron Basic DuoFern 1200 for opening and closing roller shutters with a permissible belt. i Mechanical locks of any kind are not suitable for automated operation with this device. Only use original spare parts from RADEMACHER. ◆◆ By doing so, you avoid the risk of malfunctions and damage to your RolloTron Basic DuoFern 1200.
i EN 7.2 Improper use Using the RolloTron Basic DuoFern 1200 for purposes other than previously mentioned is impermissible. There is a risk to life caused through short circuiting and electric shocks if the RolloTron Basic DuoFern 1200 is used outside. ◆◆ Never install or operate the RolloTron Basic DuoFern 1200 outside. i 7.
i EN 8. Safety instructions for the installation Poor routing of the belt can cause the belt to fail and leads to unnecessary loads on the RolloTron Basic DuoFern 1200. i In order to ensure optimal operation, the RolloTron Basic DuoFern 1200 should not be installed near metal object. ◆◆ Install the belt winder so that the belt runs as straight as possible into the device, in order to avoid unnecessary friction and wear. Incorrect installation can lead to property damage.
i 8.2 Preparation for installation EN 1. Take measurements Check that the belt box has sufficient space to house the RolloTron Basic DuoFern 1200. 2. Remove the old belt winder, if you are carrying out a conversion to an existing roller shutter system. 2.1 Let the roller shutter move fully down, until the slats are completely closed. 2.2 Remove the old belt winder and unreel the belt. CAUTION! There is a risk of injury from the pre-tensioned springs on the old belt winder.
i EN 8.2 Preparation for installation 3. Prepare the belt. 3.1 Cut the belt off approx. 20 cm under the belt box. short slit in the centre. This enables you to subsequently hook the belt onto the reel. 20 cm 3.2 Fold the end of the belt over by approx. 2 cm and cut a Recommendation The belt must run as straight and freely as possible. For stiff roller shutters, mount a deflection roller on the belt box. This helps to prevent unnecessary friction and wear to the belt. Accessories, see page 95.
i 9. Safety instructions for the electrical connection DANGER! There is a risk of fatal electric shock when touching electrical components. i EN The electrical connection can be made either with the supplied connecting cable or via a fixed laid cable on site. ◆◆ Carry out all installation and connection work in an isolated and de-energised state. ◆◆ Disconnect all phases of the mains power supply cable and secure it to prevent any reconnection. ◆◆ Check that the system is de-energised.
i 9.1 Connecting the connecting cable to the RolloTron Basic DuoFern 1200 1. Connect the provided connecting cable to the connecting terminals of the RolloTron Basic DuoFern 1200. The colour coding is irrelevant for this connection. WARNING! A damaged connecting cable may cause a short circuit. Connecting terminals ◆◆ Ensure that the connecting cable is laid safely. ◆◆ The connecting cable muse not be pinched or damaged when screwing on the RolloTron Basic DuoFern 1200. 2.
i EN 10. Drawing in and fastening the belt 1. Insert the mains plug into the socket. CAUTION! There is a risk of injury from the reel. Never reach into the reel compartment when the motor is running. 2. i Press the Up button until the fastening hook are easily accessible in the reel compartment. Reel compartment As no end points have been set yet, the drive will stop as soon as you release the button. Fastening hook 3. Remove the mains plug again from the socket.
i EN 10. Drawing in and fastening the belt 4. Next, draw-in the belt into the RolloTron Basic DuoFern Belt path in the device 1200 from the top. Feed the belt into the device, as shown in the image, and slide it over the fastening hook from above. 5. Re-insert the mains plug into the socket. 6. Press the Up button until the belt has fully wound once around the reel. 7. Pull the belt tight when winding, so that the deflection roller turns at the same time. 8.
i 11. Installing the RolloTron Basic DuoFern 1200 EN Mount the RolloTron Basic DuoFern 1200 as straight as possible, so that the belt can wind correctly. Ensure that the RolloTron Basic DuoFern 1200 sits freely in the belt box and that it is not in contact with the masonry, otherwise this may cause noise during operation. 1. Slide the RolloTron Basic DuoFern 1200 into the belt box and screw it tight using the screws provided. WARNING! A damaged connecting cable may cause a short circuit.
EN 12. End point adjustment Additional information about configuring the end points The end points must be configured for the roller shutters to stop at the desired upper and lower positions. It is imperative that both end points are configured, otherwise malfunctions may occur. i If the RolloTron Basic DuoFern 1200 is operated without an end point setting, the drive will continue to run for as long as one of the two control buttons is actuated.
EN 12. End point adjustment Set the lower end point 3. + Simultaneously press and hold the buttons. (red) The roller shutter travels downwards and the indicator light flashes red. 4. i Please ensure that the belt is not excessively slack when reaching the lower end point. i After a period of time it may be necessary to reconfigure the end points as the belt may elongate during the process of operation.
EN 13. Manual operation Manual operation is possible in any of the modes and has priority over the programmed automatic functions. 1. Open the roller shutters. By briefly pressing the button, the roller shutters will move to the upper end point. 2. or 3. Close the roller shutters. Stop the shutters in the interim. By briefly pressing the button, the roller shutters will move to the lower end point.
14. Instructions for logging DuoFern transmitters on / off In order for your RolloTron Basic DuoFern 1200 to react to control signals from the DuoFern network, it is necessary to log each DuoFern transmitter (e.g. DuoFern manual central operating unit or HomePilot®) on to the RolloTron Basic DuoFern 1200. To do so, please read the instruction manual for the respective DuoFern transmitter. i EN A RolloTron Basic DuoFern 1200 cannot be connected to another RolloTron Basic DuoFern 1200 device.
EN 14.1 Login for DuoFern transmitters 1. + Activate registering mode. Simultaneously press and hold the buttons for 4 seconds. (green) The indicator light flashes rapidly. Registering mode remains active for approx. 60 seconds. 2. Switch the DuoFern transmitter to registering mode (please refer to the relevant instruction manual). 3. Pay attention to the indicator light. Flashes green Registering mode is active. green light (5 seconds) Login was successful.
EN 14.2 Logging off DuoFern transmitters 1. + Activate the logout mode. Simultaneously press and hold the buttons for 4 seconds. (red) The indicator light flashes red. The logout mode remains active for approx. 60 seconds. 2. Switch the DuoFern transmitter to the logout mode 4. Log off the next DuoFern transmitter. For this, repeat points 1 to 2 or terminate the log-off.
EN 14.3 Clearing the DuoFern network This function enables you to clear all DuoFern transmitters from the RolloTron Basic DuoFern 1200 which are no longer accessible via radio. i Not all battery-operated DuoFern transmitters (e.g. the DuoFern manual central operating unit) can be logged off in this way. A software reset must be carried out in order to logout and delete all DuoFern transmitters, see page 87. 1. AUTO + Activate the clear function.
AUTO EN 15. Automatic operation The RolloTron Basic DuoFern 1200 supports the following automatic functions: ◆◆ ◆◆ ◆◆ ◆◆ Automatic timer Automatic dusk function Automatic dawn function Automatic solar function The automatic functions must be activated first in the DuoFern controller The automatic functions are only available if the RolloTron Basic DuoFern 1200 is operated with a DuoFern controller (e.g. DuoFern central operating unit, HomePilot®, etc.
AUTO Automatic dawn function The ventilation position The automatic dawn function causes the roller shutters to open automatically to the upper end point. If you do not want the roller shutters to close fully to the lower end point, you can use this function to configure an arbitrary position (e.g. as ventilation position). The control signals for this function are provided by a DuoFern transmitter on the DuoFern network.
AUTO 1. 15.1 Switch all automatic functions on / off simultaneously Press and hold the AUTO button for one AUTO second. 2. Pay attention to the indicator light: flashes red Return signal when pressing the button. red light (10 seconds) The automatic functions are switched on. OFF The automatic functions are switched off. EN Switch-over the automatic status AUTO Press and hold the AUTO button longer than one second.
EN 15.2 Setting the sunshine position 1. + Move the roller shutters to the desired position. 2. Save the sunshine position. 2.1 + Press and hold both buttons for approx. 4 seconds. 2.2 Release the buttons again after 4 seconds and pay attention to the indicator light: flashes green The sunshine position was saved. 86 i It is also possible to set the sunshine position via the DuoFern network, e.g. with the HomePilot®.
i EN 16. Erase all settings, software reset If necessary, you can erase all of your settings and return the RolloTron Basic DuoFern 1200 system to its original factory settings. 1. Remove the cover plate from the lower assembly screws and setting buttons. 2. + AUTO + Simultaneously press and hold the buttons for 4 seconds. 3. (red) In this process, the indicator light rapidly flashes red. 4.
i 17. Removing the RolloTron Basic DuoFern 1200 (e.g. in the event of a move) 1. Remove the cover plate from the lower assembly screws and setting buttons. 2. + 3. Fully close the roller shutters. 4. Continue to press and hold the down button. AUTO + Erase all settings. Simultaneously press and hold the buttons for 4 seconds. 5. In this process, pull out the belt as far as possible from the top of the RolloTron Basic DuoFern 1200. 6.
i 17. Removing the RolloTron Basic DuoFern 1200 (e.g. in the event of a move) EN 8. Remove the reel compartment cover. 9. Check the position of the fastening hook. 10. If necessary, move the fastening hook into an easily accessible position. CAUTION! There is a risk of injury from the reel. ◆◆ Never reach into the reel compartment when the motor is running. ◆◆ Always remove the mains plug before touching the reel compartment. 11. Finally, remove the mains plug again from the socket. 12.
i EN 18. Removing the belt in the event of unit failure In the event that the RolloTron Basic DuoFern 1200 unit fails and the motor no longer runs, you can use the disengaging bracket provided in order to fully remove the belt from the belt winder unit, without the need for cutting it. 1. Remove the mains plug from the socket. 3. Release the drive with the help of the supplied disengaging bracket. A small amount of resistance must be overcome when pressing. 4.
i EN 19. What to do if... ? Fault Possible cause / solution ... the RolloTron Basic DuoFern 1200 indicates no functions? Check the power supply incl. connecting cable and plug. ... the RolloTron Basic DuoFern 1200 no longer reacts in the morning at the configured switching time? The end points may not be configured. Reconfigure the end points, see page 76. ... the roller shutters no longer stop at the configured The end points may be displaced due to elongation of the belt.
i EN 19. What to do if... ? Fault Possible cause / solution ... the roller shutters stop during downward travel? a) The roller shutters may have hit an obstacle. Move the roller shutters back up and remove the obstacle. b) Slats have shifted out of alignment. If possible, move the roller shutters back up and realign the slats.
i 20. Information about maintenance and care of your equipment Maintenance EN Care CAUTION! A lack of maintenance can lead to personal injury through damage to your RolloTron Basic DuoFern 1200 and the roller shutter system. You can clean the RolloTron Basic DuoFern 1200 using a damp cloth. Please do not use aggressive or abrasive cleaning agents. ◆◆ Please check the RolloTron Basic DuoFern 1200 and all of your roller shutter components regularly for damage.
i EN 21. Tractive force diagram 2 3 4 5 Lifting weight [Kg] 2 Belt thickness 1.0 mm 3 Belt thickness 1.3 mm 4 Belt thickness 1.
i RADEMACHER Geräte-Elektronik GmbH hereby declares that the RolloTron Basic DuoFern 1200 comply with the Directives 2006/42/EC (Machinery Directive) and 2014/53/EU (Radio Equipment Direc-tive). i EN 22. Simplified EU Declaration of Conformity The full text of the EU declaration of conformity is included with the product and is kept on file by the manufacturer.s. RADEMACHER Geräte-Elektronik GmbH Buschkamp 7 46414 Rhede (Germany) 23.
EN 24. Warranty conditions RADEMACHER Geräte-Elektronik GmbH provides a 36-month warranty for new systems that have been installed in compliance with the installation instructions. All construction faults, material defects and manufacturing defects shall be covered by the warranty. Your statutory warranty claims shall remain unaffected by this warranty.