DRS Digital Recording Solution Series Installation and Maintenance Guide

Basic Configuration DRS5116
Wren
2003. 09. 06 (v 1.0)
77
Audio Recording
If the audio is set as “On,” and “Audio Synch with” is set as “All” (in the “Audio” menu under the
“System” tab), the audio will be available in the playback mode with all channels.
Apply
The “Apply” button confirms the Quick Setup Recording settings. The DRS will begin recording after
pressing the “Apply” button and exiting from the recording menu.
16.2. Camera
This menu is used for configuring individual cameras. In Quick Setup, the camera status is
automatically set as “On.” Settings such as Brightness and Contrast can be set for each channel.
The values assigned will apply for both monitoring and playback modes.
* DRS5016/5116 OSD Menu *
* DRS5008 Model OSD Menu *