DRS Digital Recording Solution Series Installation and Maintenance Guide

ManualsBrandsWren Associates ManualsDVRDRS5116

DRS Digital Recording Solution Series

Installation and Maintenance Guide

v 1.1

Summary of content (112 pages)

PAGE 1
DRS Digital Recording Solution Series Installation and Maintenance Guide v 1.
PAGE 2
DRS5116 Important Notices FCC Compliance Statement Caution: Any changes or modifications in construction of this device which are not approved, the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules.
PAGE 3
DRS5116 Important Notices Important Notice 1. Do not place heavy objects on top of the DRS unit. 2. DRS units are for indoor use only. They are not weatherproof. environmental specifications (Temperature & Humidity). Always referr to DRS’s To clean the DRS, gently wipe the outside with a clean dry cloth. 3. Be careful not to drop the DRS. Physical shocks may harm the product. In addition, be sure the DRS is secured after installation. 4.
PAGE 4
Table of Contents DRS5116 Table of Contents Overview ......................................................................................................... 10 1. What is DRS Digital Recording Solution? .................................................................10 2. Component List .......................................................................................................... 11 3. Description & Function ..............................................................................
PAGE 5
Table of Contents DRS5116 8.1. Viewing Image ..........................................................................................................28 8.2. Setting Date & Time ..................................................................................................29 8.2.1. Time Zone..........................................................................................................29 8.2.2. Daylight Saving ...........................................................................
PAGE 6
Table of Contents DRS5116 9.3.3. View of COM3/COM4 Serial Ports ......................................................................42 9.3.4. Configuring COM Port at OSD Menu ..................................................................43 9.4. Connecting External Device with Serial Port ..............................................................44 9.4.1. Connecting Text Input Device (ATM/POS/Access Control) ..................................44 9.4.2.
PAGE 7
Table of Contents DRS5116 Basic Configuration ....................................................................................... 62 14. Monitoring...................................................................................................................62 14.1. Viewing Basic Screen (Quad-Split).........................................................................62 14.2. Viewing Single Full Screen ....................................................................................
PAGE 8
Table of Contents 16. DRS5116 Configuration..............................................................................................................73 16.1. Quick Setup...........................................................................................................73 16.1.1. Date/Time .......................................................................................................73 16.1.2. Recording ..............................................................................
PAGE 9
Table of Contents DRS5116 Advanced Configuration.............................................................................. 107 17. Connecting External Device.....................................................................................107 17.1. Using Text Device ................................................................................................107 17.1.1. Setting at Text Menu .....................................................................................107 17.1.2.
PAGE 10
Overview DRS5116 Overview 1. What is DRS Digital Recording Solution? The DRS is a 4 - 16 analog channel network, digital recording solution. Video, Audio, and Text EventLogs are digitized and stored on/up to: two internal hard-drives and external drives up to 4 terrebyte.
PAGE 11
Overview DRS5116 2. Component List Unpack and check all the items shown below. 1. (1EA) DRS Unit 2. AC/DC Power Cord (1EA) * DRS5004 / 5008 require DC * DRS5116 model shown * adaptor * 3. CD-ROM (Including DVR manager) (1EA) 4. Remote Controller (1EA) 5. Guide (2EA) 6. 19” RACK FIXING KIT (1SET) * DRS5016 / 5116 models only * Wren 2003. 09. 06 (v 1.
PAGE 12
Overview DRS5116 3. Description & Function DRS5116 Front (1) Power switch (2) Function buttons (3) LED (4) I/O Port cover (5) USB connector (6) IEEE1394 connector (7) Remote controller receiver Wren 2003. 09. 06 (v 1.
PAGE 13
Overview DRS5116 DRS5116 Rear (8) BNC connector for video input (9) AC power connector (10) BNC connector for video output (11) BNC connector for monitor A output (12) BNC connector for monitor B output (13) Terminal block for sensor, relay, and serial input/output (14) IEEE1394 connecter (15) Terminal block for RS232 & 422/485 (16) Ethernet connector (17) GND (18) RS232 connecter (9Pin D-Sub) (19) Audio input/output connector (20) S-VHS connector Wren 2003. 09. 06 (v 1.
PAGE 14
Overview DRS5116 DRS5004 Front Panel (1) LED (2) IEEE1394 connecter (3) Remote controller receiver (4) USB connecter (5) Function buttons (6) Bracket fixing hole for rack mount Wren 2003. 09. 06 (v 1.
PAGE 15
Overview DRS5116 DRS5004 Rear Panel (7) Power switch (8) Ethernet connector (9) BNC connector for Video input (10) Audio input/output connector (11) RS232 connecter (9Pin D-Sub) (12) Terminal block for RS232 & 422/485 (13) Terminal block for Sensor input (14) Terminal block for relay output (15) Video output for Monitor or VCR (16) Video input type/impedance select & remote controller switch (17) IEEE1394 connecter (18) USB connecter (19) Power connector (DC12V) (20) GND Wren 2003. 09. 06 (v 1.
PAGE 16
Overview DRS5116 DRS5008 Front Panel (1) LED (2) IEEE1394 connecter (3) Remote controller receiver (4) USB connecter (5) Function buttons (6) Bracket fixing hole for rack mount Wren 2003. 09. 06 (v 1.
PAGE 17
Overview DRS5116 DRS5008 Rear Panel (7) Power switch (8) Ethernet connector (9) BNC connector for Video input (10) Audio input / output connector (11) RS232 connecter (9Pin D-Sub) (12) Terminal block for RS232 & 422/485 (13) Terminal block for Sensor input (14) Terminal block for Relay output (15) Video output for Monitor or VCR (16) Video input type/impedance select & remote controller switch (17) IEEE1394 connecter (18) USB connecter (19) Power connector (DC12V) (20) GND Wren 2003. 09. 06 (v 1.
PAGE 18
Installation and Connection DRS5116 Installation and Connection 4. Connecting & Running 4.1. Connecting Camera (1) Connect the CCTV camera to the DRS with the BNC cable as shown below. 1. The video type for all channels should be either NTSC or PAL. 2. The DRS sets video signal’s impedance (75Ω) automatically. Impedance is set as 75Ω. When connecting a device to video output, impedance will be “Hi-z” status. 3. Video type (NTSC/PAL) should be changed prior to installing the DRS Unit.
PAGE 19
Installation and Connection DRS5116 4.2. Connecting Monitor (1) Connect the CCTV monitor to the DRS Unit with the BNC cable as shown below. The DRS5116 has two monitor output ports for A (Normal) and B (Spot). When connecting only one monitor, use monitor A. DRS5004/5008/5016 have single monitor outputs. 4.3. Connecting Audio (1) Connect the audio signal to the DRS using the RCA cable. Wren 2003. 09. 06 (v 1.
PAGE 20
Installation and Connection DRS5116 4.4. Supplying Power (1) Connect the power cable. * Care should be taken to apply proper voltage to avoid damage to the DRS Unit * DRS5004 DRS5008 DRS5016 DRS5116 12VDC supplied 12VDC supplied 110 ~ 220VAC 110 ~ 220VAC DRS5016 & DRS5116 5000 Series Note 1. When supplying power, the DRS starts booting automatically. 2. When pressing the power switch during the first 5 seconds, a dialogue box will require an admin password.
PAGE 21
Installation and Connection DRS5116 DRS5004 & DRS5008 (1) Connect the power cable. (2) Turn on the power switch located on the DRS rear panel. Wren 2003. 09. 06 (v 1.
PAGE 22
Installation and Connection DRS5116 5. Running OSD Menu 5.1. Using Menu Press the [MENU] button to open the OSD Configuration menu. (1) Main Menu (2) Sub-Menu (3) Setting Page (1) Main Menu Tabs: The selected tab is shown in blue and the related sub-menus will be shown below the tab. To move to the previous/next Main Menu Tab, use the [◄◄/►►] arrow buttons. To move to a sub-menu, press the [ENTER] or [▼] buttons.
PAGE 23
Installation and Connection DRS5116 5.2. Dialogue Box to Edit a Word There are two methods to set a word. (1) Using the number button, enter the related numbers in order of horizontal/vertical. (For example, in order to select “C”, press the [3] and [2] buttons) (2) Using the arrow button, select a value using the [◄◄ / ►►] or [▲/▼] buttons. the horizontal and vertical bar is a selected value. The intersection of Press the [►] button to confirm the selected value.
PAGE 24
Installation and Connection DRS5116 6. Setting Remote Controller 6.1. Setting ID of DRS Digital Recording Solution When controlling several DVRs with one remote controller, set Remote Control ID as follows: (1) Press the [MENU] button. (2) Select “System” using the [►►] button and press the [ENETR] or [▼] buttons. (3) Select “Miscellaneous” from the sub-menu list using the [▼] button and press the [ENETR] button. (4) Select “Remote Control ID,” and press the [ENETR] button.
PAGE 25
Installation and Connection DRS5116 6.2. Selecting DRS If several DVRs are set with unique ID numbers, they can be controlled with one remote controller. To select a specific (DRS), keep pressing the ID button on the remote controller until a buzzer sounds during the first two seconds. Because the remote controller ID is sixteen, the DVR will correspond until the ID button is pressed sixteen times. 6.3. Operable Range of Remote Controller 6.4.
PAGE 26
Installation and Connection DRS5116 7. DRS Configuration 7.1. Basic Configuration * Camera/Sensor/Rely/Monitor Quantities are Model Dependant * 7.2. Advanced Configuration Wren 2003. 09. 06 (v 1.
PAGE 27
Installation and Connection DRS5116 7.3. External Storage & Backup Configuration 7.4. Internet/Intranet Configuration Wren 2003. 09. 06 (v 1.
PAGE 28
Installation and Connection 8. DRS5116 DRS Basic Setting 8.1. Viewing Image After the initial start-up, images are displayed in a multi-split screen according to the connected channels and specific model being installed. The following example is when four channels are connected. If a user password is set, a prompt for entering the password will appear. Wren 2003. 09. 06 (v 1.
PAGE 29
Installation and Connection DRS5116 8.2. Setting Date & Time (1) Press the [MENU] button, and select the “Quick Setup” tab. (2) Select “Date/Time” and enter the Settings Page by pressing the [ENTER] button. 8.2.1. Time Zone (1) Select the “Time Zone” and press the [ENTER] button to configure. (2) Select a value using the [◄◄/►►] buttons and press the [EXIT] button when finished. 8.2.2. Daylight Saving (1) “Daylight Saving Time” is only activated for time zones that use Daylight Savings.
PAGE 30
Installation and Connection DRS5116 8.2.4. Time Format (1) Select “Time Format” using the [◄◄/►►] or the [▲/▼] buttons and press the [ENTER] button. (2) Two Time Formats are available; ‘MM/DD/YYYY’ and ‘YYYY/MM/DD’. Select a value using the [▲/▼] buttons, and press the [EXIT] button when finished. (Default value is ‘MM/DD/YYYY’) 8.2.5. Date (1) Select “Date” using the [◄◄/►►] or the [▲/▼] buttons and press the [ENTER] button.
PAGE 31
Installation and Connection DRS5116 8.3. Setting Recording Condition Recording conditions under the “Quick Setup” menu tab will apply the same values to all analog channels 1~16. All settings are applied for 24 hours/day regardless of the values set for “Time Schedule” or “Alarm Rec.” (1) Press the [MENU] button, and select “Quick Setup.” (2) Move to sub-menu by pressing the [ENTER] or the [▼] buttons. (3) Select “Recording” using the [▲/▼] buttons and press the [ENTER] button. 8.3.1.
PAGE 32
Installation and Connection DRS5116 8.3.2. Channel Status (1) Select “Channel Status” using the [▲/▼] buttons and press the [ENTER] button. (2) Select a value using the [◄◄/►►] buttons. Press the [EXIT] button when finished. 8.3.3. Recording Speed/Quality (1) Select “Recording Speed/Quality” using the [▲/▼] buttons and press the [ENTER] button. (2) Select a value using the [◄◄/►►] buttons. Press the [EXIT] button when finished. Recording Speed/Quality means Low:Speed=1fps and Quality=Q5 Std.
PAGE 33
Installation and Connection DRS5116 9. Connecting and Configuring DIO Ports Wire Handling Trimming Wire When connecting a wire to a terminal block, follow the instructions below. Note the different types of wire that can be used. Stranded Wire: Peel off the wiring cover 8~10mm and solder it. The wire gage should be AWG 22~26. Solid Wire: Peel off the wiring cover 8~10mm and solder it. The wire gage should be AWG 20~26.
PAGE 34
Installation and Connection DRS5116 9.1. Connecting and Configuring Sensor 9.1.1. Specification In order to run sensor input of DRS series normally, the following conditions are required: Spec. Input Ch. 16Ch. Photo coupler inputs *Model Dependant* Input type N.C. (Normal Close) / N.O. (Normal Open) type Supported sensor Dry contact Connecting Connecting the trimmed wire to terminal block Available input pulse Min. 500ms Performance range Output current Typical DC 12mA 9.1.2.
PAGE 35
Installation and Connection DRS5116 9.1.3. Configuring Sensor at OSD Menu * DRS5016 / 5116 Models * (1) Press the [Menu] button, and select the “Alarm Source” among OSD menus. (2) Select the “Sensor” menu and press the [Enter] button to move to the sub-menu. 9.1.3.1. Global The “Global” is used for setting 16 sensors simultaneously to one of three types; Off/Normal Open (NO)/Normal Close (NC). (1) Select “Global” and set a type. (2) Press the “Apply” button in order to confirm the setting value. 9.1.3.
PAGE 36
Installation and Connection DRS5116 * DRS5004 Model * (1) After a sensor is connected, it can be activated through the OSD Configuration menu. (2) Select the sensor number (S1, S2, etc.) and press the [Enter] button to configure. [◄◄/►►] buttons to select “On” or “Off.” Use the Press the [EXIT] button when finished.
PAGE 37
Installation and Connection DRS5116 (1) After a sensor is connected, it can be activated through the OSD Configuration menu. (2) Select the sensor number (S1, S2, etc.) and press the [Enter] button to configure. [◄◄/►►] buttons to select “On” or “Off.” Use the Press the [EXIT] button when finished. (3) When activated, the “Pre/Post Alarm” function will cause the HVR-08E to record images at the specified speed and quality for a length of time before and/or after the sensor is triggered. 1.
PAGE 38
Installation and Connection DRS5116 9.2. Connecting & Configuring Relay Out 9.2.1. Specifications In order to operate the relay outputs of the DRS Digital Recording Solution (all models) normally, the following conditions are required. Spec. Output Ch. 4Ch. Relay differential outputs Output type Dry Contact Connecting type Connect the trimmed wire to the screwless terminal block DC 24V DC, 1.25A, 30W Rating 125V DC, 0.24A, 30W AC 125V AC, 0.5A, 62.5VA 9.2.2.
PAGE 39
Installation and Connection DRS5116 9.2.3. Configuring Relay Out at OSD Menu Each relay can be synchronized with a sensor input or with motion detection for each of the four-time schedules: (Weekday/(Day), Weekday/(Night), Weekend/(Day), Weekend/(Night)). Relays can also be controlled locally by pressing the [SEARCH/RELAY] button followed by the relay number (1-4). Relays can also be controlled remotely through the “DVR Manager software.” * DRS5004 Model * * DRS5008 Models * Wren 2003. 09. 06 (v 1.
PAGE 40
Installation and Connection DRS5116 * DRS5016/5116 Models * (1) For detailed information for setting, please refer to the “ DRS Programming Guide”.. 9.3. Connecting Serial Port 9.3.1. Configuring Serial Ports for Pan/Tilt/Zoom The DRS series units have most major PTZ protocols already pre-programmed. models not supported can still be controlled using the Transparent Protocol. Certain makes and For a list of supported protocols, refer to the list on the OSD Configuration menu.
PAGE 41
Installation and Connection DRS5116 9.3.2. Diagrams of Serial Ports 9.3.2.1. Diagram of COM1 9.3.2.2. Diagram of COM2 Wren 2003. 09. 06 (v 1.
PAGE 42
Installation and Connection DRS5116 9.3.2.3. Diagram of COM3 9.3.2.4. Diagram of COM4 9.3.3. View of COM3/COM4 Serial Ports Wren 2003. 09. 06 (v 1.
PAGE 43
Installation and Connection 9.3.4. DRS5116 Configuring COM Port at OSD Menu Configure PTZ COM ports and available modes at “System/Serial Setup”. After completing serial setup, configure the base address and port for each channel under the “Camera” menu tab. When connecting PTZ devices to several cameras, be sure the base address matches the address for the camera. Wren 2003. 09. 06 (v 1.
PAGE 44
Installation and Connection DRS5116 9.4. Connecting External Device with Serial Port 9.4.1. Connecting Text Input Device (ATM/POS/Access Control) In addition to images, the DRS units can record text data received from POS/ATM through the COM1/RS232 serial port. Connect to COM1/RS232 (9pin D-Sub) of the DRS5116, and configure the “Serial Setup” sub-menu under the “System” tab and “Text” sub-menu under the “Alarm Source” tab. 9.4.2.
PAGE 45
Installation and Connection DRS5116 9.4.3. Configuring Text (1) Select the “Alarm Source” menu among OSD menus. (2) Select the “Text”, and set each value. Before installing any external device, consult with the local distributor. Some external devices may not be compatible with the DVR. Wren 2003. 09. 06 (v 1.
PAGE 46
Installation and Connection DRS5116 9.5. Connecting USB Device The USB port can be used to copy up to one minute of images to a USB Flash memory disk. When connecting a USB device, do not exceed the rated values of the USB device. USB Spec. Available Device Output Voltage/Current Ver 1.1 (Max 12M bps) USB Memory Stick, Max. 200mA per DC 5V Port The disk should be formatted with FAT32 type. If properly connected, the disk is recognized automatically as shown in the following picture.
PAGE 47
Installation and Connection DRS5116 1. The USB Flash products that require a Windows program to operate may not be recognized by the DVR. 2. For more information about the copy function, refer to the “ DRS Programming and Maintenance Guide”. 3. Contact Wren Technical Support for Flash Product Compatibility. 9.6. Connecting Video In/Output Video outputs are available on the DRS5016/5116 models only. DVR's video in/output is composed of loop through BNC connectors in an analog format.
PAGE 48
Installation and Connection DRS5116 10. Connecting External Storage 10.1. IEEE1394 Port DRS5116 series have two IEEE1394 ports for external storage device interface. With them, the DRS series can expand storage capacity up to 4TB. Some IEEE1394 bays may not be recognized by the DRS series. Before purchasing, consult the local distributor. 10.2.
PAGE 49
Installation and Connection DRS5116 11. Network Monitoring & Managing The DRS can be accessed, controlled, and managed from a remote site via Internet/Intranet. 11.1. Connecting Ethernet (1) Turn off the DRS power switch. (2) Connect the DRS to hub with Ethernet cable. (3) Turn on the DRS power switch. 1. Supply power to the DRS after connecting Ethernet cable to protect against electrical damage 2. Check cable connection status. 3. Check LED on the DRS rear panel after supplying power.
PAGE 50
Installation and Connection DRS5116 11.2. Configuring DRS Network Information The following description is on based on Ethernet connection. For more detailed information on the Network Settings Page, please refer to the “ DRS Programming and Maintetnance Guide”. (1) Press the [MENU] button. (2) Select “System” using the [◄◄/►►] buttons and press the [ENTER] button. (3) Select “Network” using the [▲/▼] buttons and press the [ENTER] button.
PAGE 51
Installation and Connection DRS5116 12. Using DVR Manager 12.1. PC System Requirements for running DVR Manager Minimal Requirements Recommended Requirements CPU P-Ⅲ 600MHz or above P-Ⅲ 1GHz or above RAM 128 MB or above 256 MB or above VGA 16 MB or above 32 MB or above OS Windows 2000/XP Windows 2000/XP Resolution 1024 X 768 pixels or above 1024 X 768 pixels or above Network 100 Base TX Fast Ethernet 100 Base TX Fast Ethernet 12.2.
PAGE 52
Installation and Connection DRS5116 (4) Select which components to install and press the “Next” button. (5) Browse and choose a directory if the default directory is not preferred. Click the “Install” button, after selecting a directory to install. (6) Click the “Close” button after the DVR Manager program is installed successfully. Wren 2003. 09. 06 (v 1.
PAGE 53
Installation and Connection DRS5116 12.3. Uninstalling DVR manager (1) Click Windows “Start” Button. (2) Select and click the ‘Uninstall’ icon to run the Uninstall Shield. (3) The DVR Manager program will be automatically deleted. 12.4. Configstation Click icon on desktop to run “DVR Manager Configstation” program. Wren 2003. 09. 06 (v 1.
PAGE 54
Installation and Connection DRS5116 12.5. Monitor Click the related icon and run the “DVR Manager Monitor” program. 12.6. Playback Click the related icon and run the “DVR Manager Playback” program. Wren 2003. 09. 06 (v 1.
PAGE 55
Installation and Connection DRS5116 Section 2 DRS Digital Recording Solution Programming and Maintenance (v 1.0) 13. Product Description 13.1. Front Panel DRS5016 / 5116 Models (2) Remote (1) LED Controller Receiver (3) Power Switch (4) IEEE 1394 & (5) Function selection (6) Channel (7) Menu/Direction USB Interface button Selection Button Button (1) LED PWR : Displays power status. NET When lit, power is supplied. : Displays the status of Ethernet connection and rate of communication.
PAGE 56
Product Description DRS5116 manager. LOCK : Displays screen lock status (2) Remote Controller Receiver (3) Power Switch For power off, press the power switch for 5 seconds. (4) IEEE 1394 & USB Interface Supports each one port for IEEE1394 and USB 13.2.
PAGE 57
Product Description RS232 DRS5116 : RJ45 connector RS422/485 : RJ45 connector IEE1394 13.3. Front Panel DRS5008 Model (1) Remote Controller Receiver (3) LED (2) Channel Selection Button (4) Function selection button (5) Direction/Replay Button (5) Remote Controller Receiver (6) Channel Selection Button - To select a video input channel in monitoring and playback mode (7) LED - PWR: Displays power status. When lit, power is supplied.
PAGE 58
Product Description DRS5116 (8) Function selection button - SEQ: To select the sequencing mode. HVR-08E will automatically display all connected channels in successive order. - MULTI: To select the multi-channel display (4-9-divided screen). - SELECT: To select a video channel for PTZ control in the Monitor mode and for Copy/Backup/Delete in Playback mode - ZOOM: To activate the digital zoom (single channel mode only).
PAGE 59
Product Description - DRS5116 1 monitor output & 1 VCR output (5) Video Input - 8 video inputs (7) Ethernet (8) Power 13.5. Front Panel DRS5004 Series Models (3) LED (1) Remote (2) Channel Controller Receiver Selection Button (4) Function (5) Direction/Replay selection button Button (1) Remote Controller Receiver (2) Channel Selection Button - To select video input channel in monitoring and playback mode (3) LED - PWR: Displays power status. When lit, power is supplied.
PAGE 60
Product Description - DRS5116 ALARM: 1~4 (4) Function selection button - SEQ: To select the sequencing mode. HVR-04E will automatically display all connected channels in successive order. - MULTI: To select the multi-channel display (4-9-16-13 divided screen). - SELECT: To select video channel for PTZ control. - ZOOM: To activate the digital zoom (single channel mode only).
PAGE 61
Product Description DRS5116 (5) Direction/Replaying Button - MENU: To set PTZ and access Configuration menu. - ENTER: To enter and confirm the selected menu. - HELP: To change the image information display (Date, Transfer speed, etc). - EXIT/LOCK: To exit form the selected menu or lock current screen. Arrow key: Replay function or to move inside the Configuration menu. 13.6.
PAGE 62
Basic Configuration DRS5116 Basic Configuration 14. Monitoring Once power is applied to the DRS Digital Recording Solution, all connected channels will be displayed by the 4/8/16 split monitoring mode. The following steps apply for all DRS Digital Recording Solution’s monitoring menus. 14.1. Viewing Basic Screen (QuadSplit) - Insert the AC cord’s plug in a wall outlet, and apply power to the unit. The LED will come on and the DRS will start booting.
PAGE 63
Basic Configuration DRS5116 14.4. Viewing all Channels with Sequence Mode - All channels can be viewed in successive order automatically using the [SEQ] button. - Press the [MENU] button on the front panel to set-up the sequential cycle. (The default value is 3 seconds per channel for display.) - Select the “Monitor” tab of Configuration menu. - Move to “Configuration” below “Monitor” using the down arrow button on the HVR-16E front panel. - Press the [ENTER] button to enter the menu. - Select “Seq.
PAGE 64
Basic Configuration DRS5116 14.5. Viewing an Alarm Triggered Channel - When an alarm is triggered, the related channel will automatically pop-up full screen. - Set ‘Alarm Pop-up Screen’ function to “On” in “Configuration” under the “Monitor” tab, and set the display duration in “Pop-up Hold (sec)” - If more than one channel is triggered by an alarm, the related channels will be displayed simultaneously in a split-screen. In order to move the current screen, press any button. 14.6.
PAGE 65
Basic Configuration DRS5116 14.7.2. Controlling Zoom/Focus To control Zoom and Focus during live image monitoring mode: - Press the [SELECT] button. Move the “Select” icon to the desired channel. - Press the [MENU] button. - Select ‘Zoom/Focus’ from the PTZ Menu. - Control Zoom and Focus functions using the up, down, left and right arrows of front panel. 14.7.3. Using Load Preset To load preset for dome camera during live monitoring mode: - Press the [SELECT] button.
PAGE 66
Basic Configuration DRS5116 14.9. Using Screen Lock The screen lock is used to lock againt unauthorized users when the administrator is not at his desk. - For this function to operate properly, the user password should be set. - While pressing the [EXIT/LOCK] button for 2~3 seconds, the Lock mode will run with a “Screen Locked” message on the screen. When the “User Password” is set to off, the message “Enable user password first” shows on the screen.
PAGE 67
Basic Configuration DRS5116 14.10. Using Monitor B DRS5116 Model Only 14.10.1.Monitoring Monitor A is used for monitoring multi-channels, and Monitor B is used for monitoring a single-channel. The user can monitor channels as shown in the following tables. Monitor A 16-split screen mode Monitor B Remarks 1ch monitoring When monitoring 16 channels in Monitor A, administrator monitors the important channel in Monitor B simultaneously.
PAGE 68
Basic Configuration DRS5116 14.10.3.1 Ch Playback The administrator can monitor multi-cahnnels by split screen mode in Monitor A, and search/playback one channel by single full screen in Monitor B simultaneously. 15. Playback Playback is used to replay recorded images in full screen or a split screen (4/9/16) mode depending on the model installed. 15.1. Playback via Various Mode 15.1.1. Playback via Basic Screen (Full Screen) - Press the Play [►] button in the monitoring mode.
PAGE 69
Basic Configuration DRS5116 15.1.3. Playback Ch5 to Ch16 via Quad-Split Screen - Press the [SELECT] button in the quad-split mode. - Select a split position. - When a channel number is selected, the related image is played in the position. 15.1.4. Playback with Digital Zoom - Press the [ZOOM] button during the basic (single-channel) playback mode. - The Digital Zoom will expand the image to twice its normal size. - The default location of the digital zoom is in the center of screen.
PAGE 70
Basic Configuration DRS5116
PAGE 71
Basic Configuration DRS5116 15.3. Copy / Backup / Delete Data Manager The Data Manager can be used to copy/backup/delete the recorded data. This menu is activated duringthe playback mode. - Press the [SELECT] button and the [MENU] button in the playback mode. 15.3.1. Copy Data The Copy Data function is used to copy a specific data with a USB memory stick. Seconds The Seconds menu is used to designate the copy range between 1 and 60 seconds. Select Disk Select copy disk. Wren 2003. 09. 06 (v 1.
PAGE 72
Basic Configuration DRS5116 15.3.2. Backup Data Start Date & Time / End Date & Time This menu is used to designate a backup range. Select Disk The Select Disk menu is used to select which storage will be used as a backup device. To change the disk status, use the “Disk Manager” menu under the “System” tab. The Backup Manager does not support USB devices. The Backup Manager will ONLY work with devices connected through IEEE1394/FireWire ports. 15.3.3.
PAGE 73
Basic Configuration DRS5116 16. Configuration 16.1. Quick Setup There are three menus for recording setup; Quick Setup, Normal Recording and Alarm Recording menus in the Configuration Menu. Quick Setup is the easiest set-up,which activates all analog cameras (4 ~16 Model Dependant) to record with the same settings and conditions. Normal recording is the standard recording setting and can be customized based on time and channel.
PAGE 74
Basic Configuration DRS5116 - In order to access each menu, press the [ENTER] button after selecting it with the upward/downward arrow buttons on the DRS front panel. Time Zone Set the time zone using the left/right arrow button on the DRS front panel. Every time you press the left/right arrow button, the time zone will change. Select the desired time zone. To move to the previous menu, press the [EXIT] button on the DRS front panel.
PAGE 75
Basic Configuration DRS5116 Sync with NTP It is to synchronize time with NTP (Network Time Protocol) server. For more detailed information about the NTP setting, please refer to the “Network Configuration” (System Æ Network Æ NTP Settings). Time Format Set the time format between “MM/DD/YYYY” and “YYYY/MM/DD” using the the left/right arrow buttons on the DRS front panel. Date/Time Set date and time. To move from Month to Day to Year/Hour to Minute, use the left/right arrow buttons.
PAGE 76
Basic Configuration DRS5116 16.1.2. Recording Its recording values are applied to all active channels (4~16 Model Dependant) for all time periods.
PAGE 77
Basic Configuration DRS5116 Audio Recording If the audio is set as “On,” and “Audio Synch with” is set as “All” (in the “Audio” menu under the “System” tab), the audio will be available in the playback mode with all channels. Apply The “Apply” button confirms the Quick Setup Recording settings. The DRS will begin recording after pressing the “Apply” button and exiting from the recording menu. 16.2. Camera This menu is used for configuring individual cameras.
PAGE 78
Basic Configuration DRS5116 * DRS5004 Model OSD Menu *
PAGE 79
Basic Configuration DRS5116 When assigning a name to a channel, the following dialogue box will appear. This box is also used later in the system, but the method is always the same. - To select a letter, use the [ARROW]/(◄◄ and ►► ) buttons or the number buttons, “0” to “9” on the DRS5116 front panel. When using the [ARROW] buttons, use the [PLAY]/ (►) button to select each choice. - The intersection between the horizontal and the vertical bar is the selected choice.
PAGE 80
Basic Configuration DRS5116 Set “On/Off” using the [◄◄/►►] buttons. Type The type menu displays the NTSC/PAL video type set with the internal jumper. NTSC is the factory default. Color Select Color/BW using the [◄◄/►►] buttons. AGC (Auto Gain Control) Select “ON/OFF” using the [◄◄/►►] buttons. Brightness/Contrast Set the value between –9 and +9 using the [◄◄/►►] buttons. Covert If setting “Covert” as “On”,the channel will be hidden in the monitoring mode.
PAGE 81
Basic Configuration DRS5116 16.3. Normal Record. This menu is used for configuring the normal recording settings based on the channel and timetable. If recording values were programmed with the Quick Setup Menu, the previous Quick Setup values will be replaced by the Normal Recording settings. 16.3.1. Setting Global DRS5016 / 5116 Models Only This screen is used for setting all channels to the same conditions. * DRS5016/5116 OSD Menu * 1.
PAGE 82
Basic Configuration DRS5116 16.3.2. Setting by Channel Time Schedule Each camera can be set to record based on four time schedules: (1) Weekday (Day) (2) Weekday (Night) (3) Weekend (Day) (4) Weekend (Night) Each schedule can be configured under the “System” tab. Wren 2003. 09. 06 (v 1.
PAGE 83
Basic Configuration DRS5116 Used to set time schedule, move to “System” menu. Weekday Start/End Press the [ENTER] button to access the Time Setting. Set the range for “Weekday” between Monday and Sunday using the [◄◄/►►] buttons. “Weekend” is set automatically based on the “Weekday” range. Day Start/End Set the range for “Day” using the up/down buttons. The “Night” range is set automatically based on the “Day” range.
PAGE 84
Basic Configuration DRS5116 Special Time Recording This menu is used to designate different recording conditions during “Special Times.” The “Special Time” is designated under the “System” tab. There are five conditions; No Rec./Low/Standard/High/Custom (same as above). To set ”Special Time,” move to “System” tab. Up to four zones can be designated as “Special Time.” Event Recording Press the [ENTER] button to access the Event Recording feature.
PAGE 85
Basic Configuration DRS5116 16.4. Alarm Rec. This menu isused to configure the settings for alarm recording conditions. To activate this schedule set: (1) Turn the “Event Recording” under the “Normal Recording” tab to “On.” (2) The “Alarm Source” should be set before the alarm recording menu. 16.4.1. Setting Sensor It is used for settingthe sensor type. The DRS supports Normal Open (N.O.) and Normal Close (N.C.) types. Global Global is ssed to set all sensors to the same condition. Select: Off/N.O./N.C.
PAGE 86
Basic Configuration DRS5116 16.4.2. Setting Motion Detection This screen is used for setting each MD condition per channel. “Global” means to set all channels by same MD condition. It is possible to set each channel separately. Motion Detection Choose from among four sensitivity conditions; Off, Low, Standard, and High. MD Area Customize the MD area among 64 sectors (8 sectors x 8 sectors). The default value is “Select All”. Select “Custom Area” to move to the setting page.
PAGE 87
Basic Configuration DRS5116 Designate a specific area for motion detection triggered event. Press the “Custom Area” button, to customize the motion detection area. The area is divided into 64 blocks (8 x 8). The selected MD area is indicated in dark gray. To remove blocks from motion detection, select the block using the [ARROW] buttons and press the [ENTER] button. Press the [EXIT] button when finished. 16.4.3.
PAGE 88
Basic Configuration DRS5116 menu is used to set input text information. For text recording, the “COM1” port should be also set in the “SystemÆSerial Setup” menu. Sync Text With This function is used to set the channel to synchronize with text. Seek Header If a protocol is built in DRS, like Star Finger 007, this setting is needless. recognize which parameter value is inputed to theDRS. Otherwise,the DRS cannot All information has a starting point and ending point.
PAGE 89
Basic Configuration DRS5116 Sensor/MD Set the co-work of sensor/MD. Pairing means thechannel runs sensor/MD by 1 to 1. Text In order to display or record text with an image, it should be set as “On”. 1. After setting it as “Global”, press the “Apply” button. 2. For more information, please refer to the section “Setting by Channel”. Wren 2003. 09. 06 (v 1.
PAGE 90
Basic Configuration DRS5116 16.4.5. Setting by Channel Alarm Source (*=All) - With the “Alarm Source” menu, it is possible to select up to 4 sensor/MD and text input. - For setting sensor/MD, press the related number button. - Set text as “On/Off” with the [ARROW] button. - Set a PTZ preset position according to the alarm input. Recording Speed/Quality There are four conditions; Low/Standard/High/Custom.
PAGE 91
Basic Configuration DRS5116 16.5. Alarm Act. The Alarm Act is used to set relay command for each time schedule; Weekday(Day), Weekday(Night), Weekend(Day), Weekend(Night). In order to make alarm action run after setting schedule, the Relay, Buzzer, and E-mail should be also configured. 16.5.1. Schedule Select Action Source In the menus of Relay1~Relay4, Buzzer, and E-mail, Sensor or MD can be set upto 4EA or ANY. And Text can be set as “On/Off”.
PAGE 92
Basic Configuration DRS5116 16.5.2. Setup Relay Configuration The Relay Configuration enables R1~R4. Buzzer The Buzzer enables an alarm buzzer when an alarm (MD or sensor) is triggered. E-mail Notification DRS5116 Model Only The E-mail Notification allows user to enter E-mail address to receive alarm information. SMTP The SMTP enters the DNS of mail relay server. For using the E-mail function, DNS should be set in the Network configuration.
PAGE 93
Basic Configuration DRS5116 16.6. Monitor This menui s used to display an image on Monitor A & Monitor B. Alarm Pop-up (sec) This function is used to set the alarm pop-up screen. . The pop-up duration time can be set between 5 and 10 seconds. If the setting is set on “Keep”, the pop-up screen keeps holding. In order to cancel the keep mode, press another channel button. Seq. Switching(sec) This function is used to set sequence time between 1 and 60 seconds.
PAGE 94
Basic Configuration DRS5116 16.7. Monitor This menu is used to displayan image on monitor A & monitor B. Alarm Pop-Up (sec) This function is used to set the alarm pop-up screen. 10 seconds. The pop-up duration time can be set between 5 and If the setting is set on “Keep”, the pop-up screen keeps holding. In order to cancel the keep mode, press another channel button. Seq. Switching(sec) This function is used to set sequence time between 1 and 60 seconds.
PAGE 95
Basic Configuration DRS5116 16.8. System 16.8.1. Audio The DRS units support 1 channel audio input. This single audio channel can be replayed with any connected channel or with all of them. Recording Set to “On” using the [ENTER] button and the [ARROW] buttons to record audio. Audio Gain This function increases or decreases the sensitivity to the audio signal; It can be set between –7 and +8. +20dB This function is used to amplify the audio input signal.
PAGE 96
Basic Configuration DRS5116 16.8.2. Time Schedule This screen is used to designate Weekday/Weekend and Day/Night. Weekday Start/End Press the [ENTER] button to access the Time Setting. and Sunday using the [◄◄/►►] buttons. Set the range for “Weekday” between Monday The “Weekend” is set automatically based on the “Weekday” range. Day Start/End Set the range for “Day” using the up/down buttons. The “Night” range is set automatically based on the “Day” range. Wren 2003. 09. 06 (v 1.
PAGE 97
Basic Configuration DRS5116 16.8.3. Special Time Up to four zones can be designated as “Special Time.” Wren 2003. 09. 06 (v 1.
PAGE 98
Basic Configuration DRS5116 16.8.4. Security User Password Designate a User’s Password for access to monitoring and playback. The default password is “0000”. Admin Password Designate an Administrator’s Password to control access to the Configuration menu and full system control authority. The default password is “9999”. Remote Setup When the remote setup is set to “Enable,” users can configure the DRS through the S/W interface from a remote site via network.
PAGE 99
Basic Configuration DRS5116 16.8.5. Disk Setup Auto Del. (Normal) Images and data recorded under the “Normal” condition are automatically deleted as the hard-drive(s) reach capacity. Images are written over based on a first-in/first-out basis. Images recorded based on “Alarm” conditions are not written over. Auto Del. (Alarm) If enabled, all images, “Normal” and “Alarm,” will be written over based on a first-in/first-out basis.
PAGE 100
Basic Configuration DRS5116 16.8.6. Network There are five sub-menus: Network, xDSL, HRS, Port Setting, and NTP Setting. 16.8.6.1. Network This page is used to define the network type and se tthe network addresses for the DRS. Type This is to select proper network interface (Ethernet/xDSL) with which the DRS is connected. If theDRS is connected with an Internet dedicated line, a cable modem line or on a LAN environment, select the network interface as ‘Ethernet’.
PAGE 101
Basic Configuration DRS5116 DHCP can also be used for xDSL (PPPoE) interface. Sometimes, all computers on a Local Area Network (LAN) share a single Floating / Dynamic IP address. a private IP address and have the DHCP enabled. In this case, the DRS should be assigned Users on the LAN can connect to the DRS using the private IP address and outside users can connect to the DRS over the Internet.
PAGE 102
Basic Configuration DRS5116 16.8.6.3. Port Setting Monitoring Port/Playback Port The DRS uses port 8001 for monitoring and port 8105 for playback. To change the port number to an open port (some firewalls and/or ISPs block certain ports), press the [ENTER] button and use the dialogue box. TP Server Port This port is used for Transparent Protocol server.
PAGE 103
Basic Configuration DRS5116 16.8.6.4. NTP Setting NTP (Network Time Protocol) makes the time of Network devices synchronize. They are composed of a central server for supplying standard time via Network and a client for receiving the synchronized time with connecting the server. NTP Mode Set the DRS5116’s NTP mode between Client and Server. NTP Server Loc. The NTP Server Loc is possible to set after setting the NTP Mode as “Client”.
PAGE 104
Basic Configuration DRS5116 16.8.7. Serial Setup TheDRS Units have a total of 4 COM ports. Device Designate the connected external device. Interface The interface is used to designate the protocol on the RS422/RS485 menu. COM1 and COM3 are fixed as RS232. Baud rate/Parity/Stop (bit)/Data (bit) Each value should be set according to the specifications of the connected external device. Wren 2003. 09. 06 (v 1.
PAGE 105
Basic Configuration DRS5116 16.8.8. Miscellaneous
PAGE 106
Basic Configuration collided. DRS5116 In this case, the default value should be changed. Keyboard PTZ Addr This function is used to set the keyboard’s PTZ address in order to operate each PTZ camera with a keyboard. When setting the first camera’s address of each DRS5116, another cameras’ are designated automatically. For example, the first DRS has five cameras and the second DRS has six cameras, the keyboard PTA address of the fisrt DRS should be set as “1” and the second DRS be set as “6”.
PAGE 107
Advance Configuration DRS5116 Advanced Configuration 17. Connecting External Device 17.1. Using Text Device In order to use the text device, the following four menus should be set; Text menu, Serial Setup’s RS232 menu, Alarm Rec. menu, and Normal Rec. menu 17.1.1. Setting at Text Menu - Set both recording and monitoring as “On”. - Set “Synch Text with” value. - If the connected device is Star Finger 007, select it at the “Device” menu. If not, set ”Manual” and each sub-menu. Wren 2003. 09. 06 (v 1.
PAGE 108
Advance Configuration DRS5116 17.1.2. Setting at Serial Setup’s RS232 Menu - Wren Set RS232’s device menu as “Text”. Then set the baud rate, parity, stop, and data. 2003. 09. 06 (v 1.
PAGE 109
Advance Configuration DRS5116 17.1.3. Setting at Alarm Rec. Menu - Set the text event as “On”. 17.1.4. Setting at Normal Rec. menu Wren 2003. 09. 06 (v 1.
PAGE 110
Advance Configuration DRS5116 - Set the event recording as “On” for each time schedule. Whenever pressing the “Help” button, information of the displayed image is different. The default value of the monitoring mode is to show only the channel number. Then the next step is to show the channel name and text, event status, and HDD status. The default value of the playback mode is to show all information. The next level is to show the channel name and text, event status, and channel number.
PAGE 111
Advance Configuration DRS5116 WARRANTY INFORMATION Wren warranties all of its DVRs for one (1) year. The hard disk drives are under warranty for one (1) year from date of sale against any defects in material or workmanship as long as the product is used for the purposes for which it was intended. DAMAGED EQUIPMENT Wren merchandise is thoroughly inspected and carefully packed prior to distribution.
PAGE 112
Advance Configuration DRS5116 Wren 124 Wren Parkway Jefferson City, MO 65109 Toll free: (800) 881-2249 Phone: (573) 893-2249 Fax : (877) 893-2317 www.wrenassociates.com solutions@wrenassociates.com Wren and the Wren logo are trademarks of Wren Associates, Ltd. All other trademarks and/or registered trademarks mentioned herein are properties of their respective owners and are used for reference purposes only.