V5BT Setup Guide
Box Contents AC Power Cord Mini USB Charging Cable Micro USB Charging Cable Power Supply V5BT Safety Instructions & Warranty Wren V5 Safety Instructions & Warranty V5BT Setup Guide Wren V5BT Speaker 2 Wren V5BT Setup Guide
Please check that the following are true: • Your source device is equipped with Bluetooth® 2.0 or higher. English Before You Begin Setup • You have your source device within range (32 ft. or less) of your V5BT. • The Bluetooth wireless feature on your source device is turned on. Please Note: A comprehensive user manual is available for download from wrensound.com/support. It is not included with your Wren V5BT.
Powering On Your Wren V5BT Connect AC power cord to power supply. Connect power supply to power input on rear of speaker. The power indicator in the center of the power button will flash white for about 10 seconds, then turn off. Connect power supply to AC outlet. Press power button. The power indicator will blink white until the system is ready. When the system is ready, the power indicator will remain white.
Setup Button Used to pair the V5BT with Bluetooth devices English Connections 3.5mm Aux Input Connects any audio source to your Wren V5BT via a 3.5mm audio cable Power Supply Input Connects to the power supply USB Charging Port Charges most smartphones and tablets.
Pairing with your V5BT Pairing occurs when two Bluetooth devices “communicate” with each other and create a connection. The Wren V5BT can “remember” the last six Bluetooth devices that have paired with it. For best results, have your Bluetooth source device near your V5BT. Note: Your V5BT will automatically enter pairing mode the first time you plug it in. The following directions are for all subsequent pairings. If you are setting up the speaker for the first time, start with step 3 below.
A message will appear on your source device to indicate when pairing is complete, In addition, the Bluetooth indicator on the V5BT will go from blinking amber to solid white (Figure 4). You are now ready to play music wirelessly on your V5BT. To play music on your Wren V5BT, make sure that Bluetooth is turned on and the “Wren Speaker” has been selected on your source device. Then simply select your favorite music on your device and play. blinking amber Figure 3 • Pairing English Select “Wren Speaker.
Important Note on Volume Control As with all Bluetooth pairings with audio devices, the volume control of your Wren V5BT functions as a “master” volume control. That means that the volume control on the V5BT governs how loud your music can play. Once you have set the volume level on the V5BT, the volume control on your source device allows you to play music ranging from very low to as high as your V5BT “master” volume setting allows..
Bluetooth wireless technology is a small-area networking protocol that removes the need for user intervention and keeps transmission power extremely low to save battery power. Because it is efficient and easy to use, Bluetooth wireless technology has been widely adopted as the most popular (and familiar) way to enable devices like smartphones, tablets, and computers to connect to and communicate with other popular devices like audio headsets and speakers—all without cumbersome wires.
Using multiple devices on your V5BT Many households (and many individuals) have multiple Bluetooth-equipped devices that they use for music. The Wren V5BT can “remember” pairings with up to six different Bluetooth devices, eliminating the need to go through the initial pairing process every time you switch devices. To pair additional devices with your V5BT, simply follow the instructions under “Pairing with your V5BT” on pages 6-7.
solid white English To clear the V5BT’s memory of all paired devices, press and hold the Setup button on the rear of your V5BT and, while holding the Setup button, press the Power button on the front control panel. The Volume indicator will blink amber two times to indicate that the memory has been cleared. When the V5BT is powered on again, it will be in pairing mode and ready to pair with a Bluetooth device (see “Pairing with your V5BT” on page 6).
Using CSR aptX® Bluetooth audio on steroids! aptX works within Bluetooth to deliver CD-quality audio over a Bluetooth wireless connection. Simply establish a Bluetooth connection between your aptX-enabled smartphone or tablet and your V5BT and experience high fidelity wireless audio. aptX works automatically: If your source device is equipped with aptX, it will automatically detect an aptX-equipped receiving device (like the Wren V5BT) and you will enjoy CD-quality sound.
English Speaker Controls Volume Adjustment Indicator Indicates volume being adjusted. Source Selector Bluetooth Indicator Indicates Bluetooth audio source is selected. Selects the desired audio input source. Aux (3.5mm) Source Indicator Indicates aux audio source is selected. * See the full user manual at wrensound.com/support for details.
Troubleshooting Tips 14 Problem Possible Solutions Cannot pair the speaker with my Bluetooth® device • Make sure your V5BT is discoverable. Refer to “Pairing with your V5BT” on page 6. • Make sure the Bluetooth feature on your device is turned on. • Your Bluetooth device may be out of range – try moving it closer to the V5BT. • Turn the V5BT off and back on. • Make sure your Bluetooth device supports the A2DP (stereo Bluetooth) profile.
Possible Solutions Paired Bluetooth® device will not connect • If your device requires a passkey, make sure you entered 0000 (four zeroes). • Turn the V5BT off and on again. • Clear the speaker memory (see Step 4 on page 11). Remove the Wren speaker from the list of paired devices on your Bluetooth device. Then pair the device and the Wren speaker again.
Contact Information Wren Sound Systems | Customer Service/Technical Support Phone: 1-855-GET-WREN (438-9736) Email: support@wrensound.com Web: wrensound.com/support The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Wren Sound Systems, LLC is under license. Other trademarks and trade names are those of their respective owners. © 2012 CSR plc and its group companies.
V5 Safety Instructions & Warranty
1. Read these instructions. 2. Keep these instructions. 3. Follow all instructions. 4. Heed all warnings. 5. Water and Moisture • Do not use near water (bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement). 6. Ventilation • The unit should be situated so that its location or position does not interfere with its proper ventilation. • For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings.
FCC Radiation Exposure Statement: FCC ID: R48-V5AP IC:7190A-V5AP FCC ID: R48-V5PF IC:7190A-V5PF FCC ID: R48-V5BT IC:7190A-V5BT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
English Note: This mark applies only to countries within the European Union (EU) and Norway. This appliance is labeled in accordance with European Directive 2002/96/EC concerning waste electrical and electronic equipment (WEEE). This lebel indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recovery and recycling.
Wren Sound Systems, LLC Limited One/Three Year U.S. Warranty: LIMITED WARRANTY Wren Sound Systems (“Wren”), subject to the limitations contained herein, warrants its Wren Sound Systems branded wireless sound systems contained in its original packaging (“Products”) against defects in materials and workmanship when used normally in accordance with Wren’s guidelines and instructions, for a period of one (1) year from the date of original retail purchase by the original end-user customer (the “Customer”).
W R E N S O U N D . C O M V5.SIW.V1.R0.01.10.13.
Not So Fast! Before you set up your Wren VS, there are a few things you should do: REGISTRATIO N & WARRANTY Importan t! THE WREN GUARANTEE Remove and save the prepaid return shipping label from the outside of the shipping box. If you're not completely satisfied with your Wren VS, you can send it back at no charge within 30 days. We'll refund your money and even cover your return shipp ing charges. Just use the prepaid shipping label included in the shipping packet attached to the outside of the box.
