Installation & Operation Manual

Prior to installation of the Bradford White Connect™ Adapter, verify

that the water heater is fully installed to local codes and standards.

The Adapter must be within 5 feet of a 120V source. Bradford

White strongly recommends installation of the Adapter is done by

a plumbing professional. For your safety, please do not attempt

to repair the Adapter or any of its parts without Bradford White’s

authorization; doing so will affect the warranty of the Adapter and/or

the appliance itself.

In addition to this manual and the Quick Start Guide,

this kit contains:

• One Bradford White Connect™ Adapter

• One 120V power adapter cable (5 foot)

• One CAT5e male-to-male ethernet cable (7 foot)

• Four #4 screws and 3/16” drywall anchors

• Two sets of adhesive strips

• One plug for the Modbus port

For an expanded view of models that can use the

Adapter, part warranty information, and App FAQ, visit