Installation & Operation Manual

5. To Discover the Adapter first hold the action button on the Adapter
for 3 seconds. This will begin the Bluetooth pairing mode, indicated
by a flashing blue LED light on the Adapter. Your Adapter will now be
discoverable by your mobile device.
6. Once your Adapter and mobile
device are connected via Bluetooth,
your mobile device will prompt you
to select a local wireless network.
Select your network and enter
the network password using your
mobile device.
Select the Adapter from the Discover
screen, the mobile device will prompt
you for a 6-digit code. Plug in the
last six digits of your Adapter’s serial
number, which can be found on the
front label of the Adapter. This step is
for multifactor authentication and is for
security purposes.