Installation Guide

Notice: The contents of this document are proprietary and confidential and the property of Trilliant Holdings, Inc., its susidiaries, affiliates, and/or
licensors. This document is provided subject to the confidentiality obligations set forth in the agreement between your company and Trilliant. The contents
may not be used or disclosed without the express written consent of Trilliant.
14
Installation Guide for SecureMesh
®
CONN-2000 - PL-0689A
Chapter 2. Overview
This chapter describes what the SecureMesh CONN-2000 does, the kit and parts, and
supplies needed to install it.
Description
The CONN-2000 is the Smart Distribution end node element of the SecureMesh Wide
Area Network (WAN). It provides Layer 2 Ethernet transport at air data rates up to 270
Mbps.
As an endpoint of the SecureMesh WAN, the CONN-2000 provides a
10/100/1000Base-T Ethernet port for client devices to directly support distribution auto-
mation, substation monitoring, video surveillance, or work-force management applic-
ations. The WAN supports bidirectional communications between client devices and
the head end; either end can initiate communication. In addition, it supports peer-to-
peer communications without routing traffic through the head end.
After the device is installed, its auto-discovery and auto-provisioning features estab-
lish a link with the parent device within radio range, an Extender, Extender Bridge, or
Gateway.
Kit and Parts
The kit includes the following parts for the CONN-2000 model.
l Adjustable mounting L-bracket
l Necessary fasteners for attaching the L-bracket to the enclosure
l U-bolt for pole attachment, for supporting pole diameters of 1 - 2 in.
Additional Installation Parts
The installation requires the following additional parts and supplies, and are not
included in the kit.