User's Guide

DynaGateway User Guide- Version 1.2 (04/032022)
RMP - Publication controlled by SGI
5.1 Registering a
DynaGateway
By clicking the button on the top right corner, a new
screen requesting the PIN of the Gateway will be shown to the user,
as shown in Figure 12. The PIN for each DynaGateway is recorded
on the product case.
On this screen, the location of the Gateway must be defined
on the Asset Tree, i.e. in which sub-area the gateway will be
installed. This choice will impact the spots with which the Gateway
will be able to communicate as well as which users will be able to
alter the device settings.
Figure 12 - Gateway adoption screen
12