User's Guide

DynaGateway User Guide- Version 1.2 (04/032022)

RMP - Publication controlled by SGI

Once the collection intervals have been deﬁned, the

information should be saved.

It’s important to remember that the actions of the Gateway

must be spaced between spots for the best performance of the

Gateway.

At the end of the conﬁguration, by clicking “SAVE”, the user will

receive a conﬁrmation message for the conﬁguration.

5.2.1 Batch conﬁguration

The collection and spectral analysis conﬁgurations can also be

made in batches, i.e. with a group of spots. To do this, select the

checkbox of the spots to conﬁgure and click “Batch Conﬁgure” in the

top right corner (Figure 18).

In the conﬁguration window, the start time of the continuous

collections and spectral analyses can be conﬁgured, as well as the

time interval for which the actions should be repeated and the

interval between each spot being collected.

Figure 18 - Batch conﬁguration