User's Guide

DynaGateway User Guide- Version 1.2 (04/032022)
RMP - Publication controlled by SGI
This document outlines the purpose and operation of the
DynaGateway- the automatic data collector of DynaLoggers.
The purpose of the DynaGateway is to interact with
DynaLoggers within its Bluetooth range, collecting measurements
and requesting spectral analyses according to the time intervals
defined by the user. The collected data is sent directly to the Web
Platform via a Wifi, Ethernet or Mobile Network connection.
The following section presents the prerequisites for the
operation of the device, as well as the system configuration screens.
1. Introduction
To be able to operate and make full use of the DynaGateway
features, some requirements are necessary:
- Mains power supply;
- Internet connection
- Release of data traffic (Wifi and Ethernet);
By using a Wifi or Ethernet network for the communication of
the gateway, it’s necessary to release outbound data traffic to the
following hostnames:
• mqtt.googleapis.com Port: 8883
• time.google.com Port: 123
For more information regarding the release of the network, get
in touch with our support team ([e-mail]).
2. Prerequisites
03