User's Guide

DynaGateway User Guide- Version 1.2 (04/032022)
RMP - Publication controlled by SGI
08
Nano SIM card
To use the mobile network interface, a Nano SIM card is
necessary, which should be inserted into the bottom part of the
DynaGateway (Figure 7).
Figure 6 - Wifi interface
Figure 7 - SIM card slot
4.2.2 LTE
*
(LED: Red)
4.2.1 Wifi (LED: White)
For Wifi connection, the SSID (name of the Wifi network) and
the network password will be required (Figure 6). It’s important to
remember that the name of the Wifi network to be used is exactly
the same as that registered here.
For operation via Wifi, it’s necessary to release the network.
When this interface is used, the Network LED will turn white when
the connection is successful.