Owner Manual

ASSEMBLY INSTRUCTIONS
7
Wrap electrical tape around each individual
wire connector down to the wire. (Fig. 7)
Warning: Make sure no bare wire or
wire strands are visible after making
connections.
7.
Canopy
7
Outlet Box
Wire
Connector
D
6.
Prepare wire by stripping 3/4 in. of insulation
from wire ends using wire strippers. Tie wire into
a knot. (Fig. 6A)
Connect one of the wires from the fixture to
WHITE wire from outlet box using existing wire
connector or wire connector provided. Connect
the other wire from the fixture to BLACK wire
from outlet box using existing wire connector or
wire connector provided. Connect
BARE/GREEN ground wire from outlet box to
BARE ground wire from mounting strap using
wire connector provided. (Fig. 6B)
Note: Screw wire connectors on in a clockwise
direction.
WARNING: Never connect ground wire to
white or black power supply wires.
WARNING: To reduce the risk of fire,
electrical shock, or personal injury, wire
connectors provided with this light fixture are
designed to accept only one 12-gauge house
wire and two lead wires from the light fixture. If
your house wire is larger than 12-gauge or there
is more than one house wire to connect to the
corresponding fixture lead wires, consult an
electrician for the proper size wire connectors to
use.
Outlet Box
6
7A
6B
WHITE
BLACK
6A
Fixture Wire
Fixture Wire
BARE
Wire
Connector
Wire
Connector