PRODUCT NAME: ILT Wall Sconce Please consult your electrician for Hang fixture and wiring Caution;Xenon Bulbs get very hot and may burn you. Always meek sure bulbs are off for a minimum of 10 minutes before handling. Fixture may be dimmed using an electronic low voltage dimmer.
IMPORTANT : Turn off power at the main fuse or circuit breaker box before starting installation E& IR (B) Support screw (C)Mounting bracket Locate all hardware & components before discarding packaging Step. 1: Install mounting bracket (C) to outlet box. D (Positive ground wire (green wits) Step. 2: Wire fixture to wires in outlet box. Copper/green wire is for Ground. Cleaning & Care: Clean with soft cloth and a mild detergent. Do not use abrasive cleaner.
IMPORTANT : Turn off power at the main fuse or circuit breaker box before starting installation i (D)Bulb (E)Glass Locate all hardware & components before discarding packaging 3.) @ D Step. 3: Install fixture to bracket(C) and tighten ball nuts (B) on the back plate to secure. 4,) Step. 4: Install the fixture, and put the the socket. Cleaning & Care: Clean with soft cloth and a mild detergent. Do not use abrasive cleaner.
