PRODUCT NAME: 5LT Chandelier Please consult your electrician for Hang fixture and wiring Caution;Xenon Bulbs get very hot and may burn you. Always meek sure bulbs are off for a minimum of 10 minutes before handling. Fixture may be dimmed using an electronic low voltage dimmer.
IMPORTANT : Turn off power at the main fuse or circuit breaker box before starting installation () Canopy (B) Stems (C)Body Locate all hardware & components before discarding packaging Step. 1: Remove mounting bracket (G) from fixture and install to electrical box. Step. 2: Run wire through combine stem lengths to meet desired mounting height. 3.) Step. 3: Wire fixture to wires in outlet box. Copper/Green wire is for Ground. Cleaning & Care: Clean with soft cloth and a mild detergent.
IMPORTANT : Turn off power at the main fuse or circuit breaker box before starting installation B (D)Bulb (E)Glass (F)Ball nut T T (G)Bracket Locate all hardware & components before discarding packaging Cleaning & Care: Clean with soft cloth and a mild detergent. Do not use abrasive cleaner. Step. 4: Install fixture to bracket and tighten ball nuts (F) on the canopy to secure. 5.) Step. 5: Install the fixture, and put the the socket.