Caution : You must read this before you proceed CHAIR Label Picture Description QTY A Leg 2 B Seat 1 C Armrest 2 D Backrest 1 E Seat Cushion 1 F Back Cushion 1 Page 1 OF 6
Label Picture Description QTY ① Bolt (M6*40MM) 9 ② Bolt (M6*10MM) 7 ③ Washer 9 ④ Allen Key 1 Before Beginning Assembly: *9 *9 Back Cushion(F) Backrest(D) Armrest(C) Armrest(C) Seat Seat(B) Leg(A) FRONT FACING This Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective.
Step 1 Open the carton and place all the parts onto a clean, non-marring surface. Place the Seat (B) facedown. Attach Leg(A) to Seat(B) using Bolts(①) and washer (③)with Allen Key(④) as shown above. Do not fully tighten the Bolts. Step 2 Attach another Leg(A) to Seat(B) using Bolts(①) and washer (③)with Allen Key(④) as shown above. Place the Chair on a LEVEL SURFACE. Inspect it and make sure all Leg are adequately connected.
Step 3 3.2 3.1 3.1Insert Armrest (C) to Seat(B) as show above 3.2Attach Armrest (C) to Seat(B) using Bolts(②)with Allen Key(④) as shown above. Tighten the Bolts. Step 4 4.1 4.2 4.1 Insert another Armrest (C) to Seat(B) as show above 4.2 Attach another Armrest (C) to Seat(B) using Bolts(②)with Allen Key(④) as shown above. Tighten the Bolts.
Step 5 5.1 5.2 5.1Insert Backrest(D) to Seat(B) as show above 5.2Attach Backrest(D) to Seat(B) using Bolts(②)with Allen Key(④) as shown above. Tighten the Bolts. Step 6 Back Cushion(F) Seat Cushion(E) Put Seat Cushion(E) and Back Cushion(F) on the Chair. Your Chair is ready for use. This Chair can only be used on a flat, level surface.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
Caution : You must read this before you proceed Loveseat Label Picture Description QTY G Leg 2 H Seat 1 I Armrest 2 J Backrest 2 E Seat Cushion 2 F Back Cushion 2 Page 1 OF 7
Label Picture Description QTY ① Bolt (M6*40MM) 9 ② Bolt (M6*10MM) Washer 9 Allen Key 1 ③ ④ 9 Before Beginning Assembly: *9 *9 Back Cushion(F) Armrest(I) Seat Cushion（E) Armrest(I) Seat(H) Leg(G) FRONT FACING This Loveseat has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Loveseat parts, the above picture is to help you put the various parts into perspective.
Step 1 Open the carton and place all the parts onto a clean, non-marring surface. Place the Seat (H) facedown. Attach Leg(G) to Seat(H) using Bolts(①) and washer (③)with Allen Key(④) as shown above. Do not fully tighten the Bolts. Step 2 Attach another Leg(G) to Seat(H) using Bolts(①) and washer (③)with Allen Key(④) as shown above. Place the Chair on a LEVEL SURFACE. Inspect it and make sure all Leg are adequately connected.
Step 3 3.1 3.2 3.1Insert Armrest (I) to Seat(H) as show above 3.2Attach Armrest (I) to Seat(H) using Bolts(②)with Allen Key(④) as shown above. Tighten the Bolts. Step 4 4.1 4.2 4.1Insert another Armrest (I) to Seat(H) as show above 4.2Attach other Armrest (I) to Seat(H) using Bolts(②)with Allen Key(④) as shown above. Tighten the Bolts.
Step 5 5.2 5.1 5.1Insert Backrest(J) to Seat(H) as show above 5.2Attach Backrest(J) to Seat(H) using Bolts(②)with Allen Key(④) as shown above. Tighten the Bolts. Step 6 6.2 6.1 6.1 Insert another Backrest(J) to Seat(H) as show above 6.2 Attach another Backrest(J) to Seat(H) using Bolts(②)with Allen Key(④) as shown above. Do not fully tighten the Bolts.
Step 7 Back Cushion(F) Seat Cushion(E) Put Seat Cushion(E) and Back Cushion(F) on the Chair. Your Chair is ready for use. This Chair can only be used on a flat, level surface.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
Caution : You must read this before you proceed TABLE Label Description QTY K Leg 2 L Table Top Frame (with Suction Cups) 1 M Glass Top 1 Description QTY ② Bolt (M6*15MM) 5 ⑤ Bolt (M6*25MM) 5 ④ Allen Key 1 Label Picture Picture Page 1 OF 4
Before Beginning Assembly: *5 *5 Glass Top(M) Table Top Frame(L) Leg(K) FRONT FACING This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Open the carton and place all the parts onto a clean, non-marring surface. 1.
Step 2 2.1Attach Leg(K) to Table Top Frame(L) using Bolts(②) with Allen Key(④) as shown above. 2.1Attach Leg(K) to Table Top Frame(L) using Bolts(⑤) with Allen Key(④) as shown above. Do not fully tighten the Bolts. Step 3 Place the Table on a LEVEL SURFACE. Inspect it and make sure all parts are adequately connected. Gently and carefully press onto the Table with both your hands, this will help to align all parts at all joints.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
