Assembly Instructions

Step 2
Place the Glass Top(M) on the assembled Table Frame.
Caution: The Glass is Heavy. Two adults are required for lifting and moving it.
The suction cups hold the glass in place, to ensure the glass does not fall.
Your Table is ready for use.
This Table can only be used on a flat, level surface.
2.1Attach Leg(K) to Table Top Frame(L) using Bolts(②) with Allen Key(④) as shown above.
2.1Attach Leg(K) to Table Top Frame(L) using Bolts(⑤) with Allen Key(④) as shown above.
Do not fully tighten the Bolts.
Step 4
Place the Table on a LEVEL SURFACE.
Inspect it and make sure all parts are adequately connected.
Gently and carefully press onto the Table with both your hands, this will help to align all parts
at all joints.
Then get off the Table, and in a sequential manner, proceed to tighten all Bolts.
When tightening the Bolts, tighten sequentially.
DO NOT tighten any Bolt fully and then move on to the next one, this may cause the
frame to warp.
If there are still wobbles, loosen the Bolts and execute this same process.
Note: This step is done best with the assistance of a second adult.
Step 3
Page 3 OF 4