Assembly Instructions

PAGE 1
PAGE 2
ASSEMBLY INSTRUCTIONS - IMPORTANT: Carefully unpack & identify each component before attempting to assemble. Refer to parts list. Please take care when assembling the unit and always set the parts on a clean, soft surface. Check screws, nuts and bolts periodically (or every 6 months). Tighten if necessary. ADDITIONAL TOOL REQUIRED: PARTS LIST DESCRIPTION QUANTITY 1. Caster – Non-locking 2 2. Caster – Locking 2 3. Caster with Bolt 1 4. Philips Screw – 7/16" 6 5. Metal Plate 1 6.
PAGE 3
Step 1 1 1 4 2 4 3 4 4 2 4 5 • Lay unit upside down on a clean, flat surface. • Insert one corner of Non-locking Casters (1) into slot (see inset) and attach opposite corner to unit using Philips Screw (4). • Repeat for Locking Casters (2). • Screw Caster with Bolt (3) into Metal Plate (5) and tighten with Hex Wrench (6). • Attach Metal Plate (5) to unit as shown using Philips Screws (4). p.