Installation & Assembly

Assembly Notes:

During assembly, hand tighten screw only when all screws

are in place, you may then tighten all screws completely.

CAUTION:

1. Do not use this chair as a step ladder.

2. Check for loose screws and tighten them every 6 months.

Guest / Reception Chairs

WEIGHT CAPACITY: 250 lbs.

Parts Listing

STOP

Assembly Instructions

Tools Needed: Phillips Head Screwdriver

Please read all instructions before assembly.

Step 1: Mount both sides of Seat Cushion (A) onto

the bottom rib of the steel frame (C or D), with special

coated Ni-Lock Screws (E) and tighten with screwdriver.

Step 2: Place the Back Cushion (B) onto the back rib on top

of the side Steel Frame (C or D), attach it with the

Hex Screws (F) and tighten with screwdriver.

6 mm Hex Screws

4 pcs.

M8 Ni-Lock

Hex Screws

8 pcs.

Seat Cushion

Back Cushion

Steel Frame

Armless

1 pair

Steel Frame

with Arm

1 pair

C/D