VANITY CABINET + VANITY TOP + MIRROR VANITY SET INSTALLATION INSTRUCTIONS
VANITY CABINET + VANITY TOP + MIRROR VANITY SET DIMENSIONS/TECHNICAL DATA READ ALL INSTRUCTIONS BEFORE UNPACKING THE PRODUCT 2 PEOPLE ARE REQUIRED TO LIFT AND DURING ENTIRE INSTALLATION OF THIS PRODUCT INSTALLATION OF OUR PRODUCTS BY AN INEXPERIENCED INSTALLER MAY RESULT PERSONAL INJURY OR DEATH! INSTRUCTIONS THAT, IF IGNORED COULD RESULT IN DEATH OR SERIOUS INJURY CAUSED BY INCORRECT HANDLING OR INSTALLATION OF THE PRODUCT. THESE INSTRUCTIONS MUST BE OBSERVED FOR SAFE INSTALLATION.
VANITY CABINET + VANITY TOP + MIRROR VANITY SET PRODUCT PACKAGE COMPONETS/TOOLS REQUIRED VANITY COMBINATION MAIN COMPONENTS P-TRAP AND POP AND POP-UP INSTALLATION DIAGRAM Sink Pop-up Wall Mount Mirror Silicon Washer x1 Silicon Washer Brass Nut Rubber Washer Mounting Ring Marble Top Tail Pipe x1 TOOLS REQUIRED FOR INSTALLATION (NOT INCLUDED) Safety Glass Vanity Base Cabinet Silicone Caulk Gun Soft Cloth or Blanket Pliers Pencil/Marker Level x1 INSTALLATION ACCESSORIES x2 Wall Anchors
VANITY CABINET + VANITY TOP + MIRROR VANITY SET DIMENSIONS & SPECIFICATIONS 31 1/2" 23 1/2" 2 3/8" Mirror 23 1/2" 21 1/2" 23 1/2" 22" 23 1/2" 7 1/2" 32 7/8" 1 1/8" 7/8" 21 5/8" 22 7/8" Front View Side View ATTENTION! Due to manufacturing process any dimensions may have a tolerance up to 3/8". All sizes are for reference only. It is highly recommended to pull all dimensions of actual model for installation and measuring purposes.
VANITY CABINET + VANITY TOP + MIRROR VANITY SET INSTALLATION STEPS INSTALL DOOR & DRAWER HANDLES All vanity cabinets come pre-assembled. All door and drawer handles are installed from the inner side of the drawer to avoid damage during transportation. Open the drawers to install the handles. Unscrew every handle and install them from the outer side of the doors and drawers. See Figure 1 Note: It is highly recommended not to use electric drill to avoid overtightening the screws during handle installation.
VANITY CABINET + VANITY TOP + MIRROR VANITY SET INSTALLATION STEPS MIRROR INSTALLATION Using a tape measure find a length of the vanity top and divide it by 2. The result of the division will be a center of the top. Using a tape measure find the center of the top and mark a dot on the wall just right above theb top using a pencil. Using a level tool find a location of a second dot to draw a vertical line that will serve as installation center for the mirror. IMPORTANT! Using a stud finder locate wooden studs.
VANITY CABINET + VANITY TOP + MIRROR VANITY SET Retain these installation instructions for future reference! Thank you for using our products! We reserve the right to modify this installation instructions at any time. It is a customer's sole resposibility to inquiry for the updates of the installation instructions.
