Assembly Instruction

CAUTION: Read instruction carefully and turn electricity off at main circuit breaker panel

Care and Cleaning

To clean the outside of the fixture, use a dry or slightly dampened clean cloth(use clean

water, never a solvent)to wipe the surface of the fixture.

To clear the inside of the fixture, first disconnect power to the fixture by turning off the circuit

breaker or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean

cloth(use clean water, never a solvent) to wipe the interior surface of the fixture

Do not use any cleaners with chemical, solvents or harsh abrasives. Use Only a dry soft cloth

to dust or wipe carefully.

Estimated Assembly Time:30 minutes

Part List and Hardware List

PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY

A mounting screw 2X E screwed ball 2X

B mounting bracket 1X F ground screw 1X

C machine screw 2X G canopy 1X

D wire connector 3X H bulb 1X

1 / 2

before beginning installation.

PAGE 1
Assembly Instruction CAUTION: Read instruction carefully and turn electricity off at main circuit breaker panel before beginning installation. Care and Cleaning To clean the outside of the fixture, use a dry or slightly dampened clean cloth(use clean water, never a solvent)to wipe the surface of the fixture. To clear the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box.
PAGE 2
Installation Step 1 Unpack all parts from cartons carefully. 1. Fix the mounting bracket(B) to the outlet box with machine screw(C). Attach the Canopy(G) to the Mounting bracket (B) and fix it by turning the screwed ball (E). Step 2 Wire connection Make wire connections, with wire connectors(D), following the reference chart listed below.