Specifications

Fixture Finish: Black
Glass/Shade Finish: Clear Glass Cylinder
Materials: Steel
Fixture Width: 4.625” 11.7475cm
Fixture Height: 9.625” 24.4475cm
Fixture Extension 6”
Glass Diameter: 4” 10.16cm
Glass Height: 6” 15.24cm
Canopy/Backplate: 4.5”L x 4.5”W x 0.75”E 11.43cmL x 11.43cmW x 1.905cmE
Chain: NA NA
Rod: NA NA
Wire: 10’ 3.048m
Bulb Type: Incandescent, Type A
Wattage: 1 x 60W(M)
Voltage: 120
Install Position: Reversible
Approved Location: Dry Location
Sloped Ceiling: No
ADA: No
Close-to-ceiling: No
Bulbs Included: No
Dimmable: Yes
• Available in matte black or pewter with matte black, aged brass, and pewter accents
• Clear glass shade offer unobstructed view of the matching socket
• May be mounted with the glass facing up or down
1 Light Bath Vanity
1-light bath is a contemporary, geometric series of customizable
layered boxes. These striking open-cage fixtures bring
sophisticated style to a space. Offered in a variety of finish
options and silhouettes, including two-tone combinations, this
clean transitional design pairs well with modern fashions. 1-light
bath fixtures are popularly used in halls, stairways, bathrooms
and entries as accents.
Dimensions and specifications are approximate and based on the most current information possible at the time of publication. We reserve the right to make design changes and modifications
without prior notice. Our products are UL/CUL approved. Unless otherwise noted as pending, Wattages stated are the maximum recommended; however, lower wattages may be used. Bulbs are
not included unless otherwise noted. Larger fixtures may require reinforced outlet boxes and additional support. Receipt or possession of these materials does not constitute an agreement to sell.