Assembly Instructions Caution: You must read this before you proceed Dining Chair Part List Label Picture Description QTY A Left Arm Panel 1 B Right Arm Panel 1 Page 1 OF 7
C Seat Panel 1 D Backrest Panel 1 Description QTY ① Bolt (M6x35mm) 8 ② Bolt (M6x45mm) 5 ③ Washer 13 ④ Bolt Cap 6 ⑤ Allen Key 1 Hardware Label Picture Assembly Preparation Before Beginning Assembly: Page 2 OF 7
Assembly Steps Overview Backrest Panel (D) Left Arm Panel (A) Right Arm Panel (B) Seat Panel (C) FRONT FACING This Dining Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Dining Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Unpack and place all parts on a clean, non-marring surface. Attach the Seat Panel(C) to Left Armrest(A) using Bolts(①) and Washers(③) with Allen Key(⑤) as shown in the picture. Do not fully tighten the Bolts. Occasionally some of the PE Wicker shifts and covers the mounting positions preventing easy assembly. The PE Wicker should never be cut, but moved away from the mounting positions. Step 2 Attach Seat(C) to Right Armrest(B) using Bolts(①) and Washers(③) with Allen Key(⑤) as pictured.
Step 3 Attach Backrest Panel(D) to Seat Panel(C) using Bolts(①) and Washers(③) with Allen Key(⑤) as shown in the picture. Do not fully tighten the Bolts. Step 4 Attach Backrest Panel(D) to Left Armrest(A) and Right Armrest(B) using Bolts(②) and Washers(③) with AllenKey(⑤) as pictured. Tighten all Bolts at all joints sequentially. DO NOT tighten any Bolt fully and then move on to the next one. This may cause the frame to warp.
Step 5 Put the Bolt Caps(④) on the Bolts. Your Dining Chair is ready for use. This Dining Chair can only be used on the flat, level surface.
Page 7 OF 7