Caution : You must read this before you proceed BOOKCASE Label Picture Description QTY A Top Panel 1 B Left Side Panel 1 Page 1 OF 18
C Right Side Panel 1 D Center Panel 1 E Door Panel 1 F Long Middle Panel 1 G Short Middle Panel 1 H Long Shelf Panel 3 I Short Shelf Panel 3 J Back Panel 1 K Bottom Panel 1 L Leg Panel 2 Page 2 OF 18
Label Picture Description QTY ① Cam Lock 19 ② Cam Bolt 19 ③ Cam Cap 19 ④ Positioning Dowel (8*30mm) 29 ⑤ Cap Wood Screw (6*50mm) 3 ⑥ Screw (3.
Cabinet Restraint Device Hardware ⑮ Metal Bracket 4 ⑯ Wall Plug 2 ⑰ Wall Plug Screw 2 ⑱ Pan Head Screw 2 ⑲ Cabinet Restraint Strap 2 Before Beginning Assembly: X 19 X 29 X 19 X 19 X3 X 13 X1 X3 X 25 X9 X 41 X1 X1 X1 X2 Page 4 OF 18
Overview Top Panel (A) Center Panel (D) Back Panel (J) Right Side Panel (C) Left Side Panel (B) Short Shelf Panel (I) Long Shelf Panel (H) Short Middle Panel (G) Long Middle Panel (F) Short Shelf Panel (I) Long Shelf Panel (H) Short Shelf Panel (I) Long Shelf Panel (H) Door Panel (E) Bottom Panel (K) FRONT FACING Leg Panel (L) This Bookcase has multiple parts and may require up to 60 minutes to assemble.
Step 2 2.1 ⑫ ② B 2.2 C 2.1) Attach Cam Bolts(②) to mounting positions on Left Side Panel(B) with Screwdriver(⑫). 2.2) Attach Cam Bolts(②) to mounting positions onRight Side Panel(C) with Screwdriver(⑫). Step 3 3.2 ⑫ ① ⑫ ① ① 3.3 ② 3.1 ④ ② ② D 3.1) Insert Positioning Dowels(④) into mounting positions on Center Panel(D) by hand. 3.2) Insert Cam Locks(①) into mounting positions on Center Panel(D) by hand. 3.3) Attach Cam Bolts(②) to mounting positions on Center Panel(D) with Screwdriver(⑫).
Step 4 ② ⑫ ⑫ ② ② D Lift Center Panel(D) upward with help from another adult. Attach Cam Bolts(②) to mounting positions on the opposite side of Center Panel(D) with Screwdriver(⑫). Step 5 ⑫ ⑥ ⑨ ⑥ E ⑨ ⑨ ⑨ Attach Connectors(⑨) to Door Panel(E) with Screws(⑥) using Screwdriver(⑫). Tighten the Screws fully in a sequential manner. Note: There are pre-existing mounting positions on the Door Panel(E) to attach the Connectors(⑨). Step 6 6.1 6.2 ① ④ ① ④ ① ④ ① ④ F ① ④ 6.
Step 7 7.2 7.1 ① ① ④ ① ④ ① ④ G ① ④ ④ 7.1) Insert Cam Locks(①) into mounting positions on Short Middle Panel(G) by hand. 7.2) Insert Positioning Dowels(④) into mounting positions on Short Middle Panel(G) by hand. Step 8 8.1 8.2 ① ④ ① ④ ④ ① ① K ① ④ ④ 8.1) Insert Cam Locks(①) into mounting positions on Bottom Panel(K) by hand. 8.2) Insert Positioning Dowels(④) into mounting positions on Bottom Panel(K) by hand.
Step 10 10.1 ① ② 10.3 ④ 10.2 ⑫ Arrow ① F NOTE ① D ④ ② Cam Bolt Mounting Position 10.1) Insert Positioning Dowels(④) from Long Middle Panel(F) into mounting positions on Center Panel(D). Note: Ensure the arrows on Cam Locks head points towards the Cam Bolt mounting positions. 10.2) Insert the mounting positions on side of Long Middle Panel(F) onto Cam Bolts(②) on Center Panel(D). 10.3) Turn the Cam Locks(①) clockwise with the Screwdriver(⑫) until they all lock into place. Step 11 11.2 11.
Step 12 12.2 ② ① 12.1 12.3 ④ ⑫ Arrow ① G A NOTE ① D F ④ ② Cam Bolt Mounting Position 12.1) Insert Positioning Dowels(④) from Center Panel(D) into mounting positions on Top Panel(A). Note: Ensure the arrows on Cam Locks head points towards the Cam Bolt mounting positions. 12.2) Insert the mounting positions on side of Center Panel(D) onto Cam Bolts(②) on Top Panel(A). 12.3) Turn the Cam Locks(①) clockwise with the Screwdriver(⑫) until they all lock into place. Step 13 13.1 ④ D ⑧ K ⑤ 13.
Step 14 14.1 ④ A 14.2 Arrow ① B ② ① ① K ⑫ NOTE ④ ② Cam Bolt Mounting Position 14.3 14.1) Insert Positioning Dowels(④) from Top Panel(A) and Bottom Panel(K) into mounting positions on Left Side Panel(B). Note: Ensure the arrows on Cam Locks head points towards the Cam Bolt mounting positions. 14.2) Insert the mounting positions on side of Top Panel(A) and Bottom Panel(K) onto Cam Bolts(②) on Left Side Panel(B). 14.
Step 16 16.1 A ④ Arrow 16.2 C ① NOTE ① ② 16.3 ① K ④ ② Cam Bolt Mounting Position ⑫ 16.1) Insert Positioning Dowels(④) from Top Panel(A) and Bottom Panel(K) into mounting positions on Right Side Panel(C). Note: Ensure the arrows on Cam Locks head points towards the Cam Bolt mounting positions. 16.2) Insert the mounting positions on side of Top Panel(A) and Bottom Panel(K) onto Cam Bolts(②) on Right Side Panel(C). 16.
Step 18 CAUTION ⑬ ⑦ J Note ⑦ ⑦ ⑦ Flip the whole Bookcase over. Attach Back Panel(J) to Bookcase Assembly using Nails(⑦) with Hammer(⑬). Please be extra careful when using a hammer to avoid injury. Note: Hit Nails along all four edges (slightly inwards from sides) on the lines drawn on the Back Panel(J). Step 19 ⑪ ⑬ Attach PVC Nail Legs(⑪) to the Base of the assembled Bookcase with Hammer(⑬).
Step 21 H I H I H I Put Long Shelf Panels(H) and Short Shelf Panels(I) in place on Shelf Supports(⑩). Step 22 22.3 C 22.1 ⑥ E ⑫ ⑨ ⑥ 22.2 22.1) Attach Connectors(⑨) to Right Side Panel(C) using Screws(⑥) with Screwdriver(⑫). Tighten the Screws fully in a sequential manner. 22.2) Rotate first screw on Connectors(⑨) to adjust left-right position of Door Panel(E) when necessary. 22.3) Rotate second screw on Connectors(⑨) to adjust in-out position of Door Panel(E) when necessary.
！ WARNING Serious or fatal crushing injuries can occur from tipping furniture. To help prevent tip-over: ALWAYS secure this furniture to the wall using Cabinet Restraint Device. See product instructions for more ways to help prevent furniture tip-over. Usage For Cabinet Restraint Device: To Secure Bookcase against wall, attach Metal Brackets(⑮) to wall and product, and use Cabinet Restraint Straps(⑲) to connect the Metal Brackets(⑮). Instructions: Step 23 ⑮ ⑮ ⑱ J ⑫ ⑮ 23.
Step 24 24.1 24.2 ⑭ ⑯⑯ ⑯ ⑬ 24.1) Drill two holes on wall at same height as Metal Brackets(⑮) on Bookcase with Power Drill(⑭). You can mark these points in two ways as below: 1) Move the Bookcase back to the wall. Mark two points same height as Bookcase on the wall. Note: The Metal Brackets need to be secured to solid, load bearing surface. Please use a Stud Finder(not supplied) if needed to locate the Wall Frame.
Step 26 ⑲ ⑲ ⑲ ⑮ ⑮ Move the Bookcase back against wall. Pull the Restraint Straps(⑮) through the Metal Brackets(⑮) on the wall and Bookcase one by one, and pull the Restraint Straps(⑲) tight. Step 27 Your Bookcase is ready for use. This Bookcase can only be used on a flat, level surface.
Page 18 OF 18
