Assembly Instructions

Step 24
Step 25
24.1) Drill two holes on wall at same height as Metal Brackets(⑮)
on Bookcase with Power Drill(⑭).
You can mark these points in two ways as below:
1) Move the Bookcase back to the wall. Mark two points same
height as Bookcase on the wall.
Note: The Metal Brackets need to be secured to solid, load
bearing surface. Please use a Stud Finder(not supplied) if
needed to locate the Wall Frame.
2) Measure the height of the Metal Brackets(⑮) with
ruler/measuring tape and mark on wall to keep them accurate and
same height.
24.2) Insert Wall Plugs(⑯) into holes on wall with Hammer(⑬).
Attach Metal Brackets(⑮) to Wall Plugs(⑯) using Wall Plug
Screws(⑰) with Screwdriver(⑫).
⑬
⑮
⑰
⑫
⑯
⑭
24.2
24.1
⑯
⑯
⑯
⑮
⑮
Page 16 OF 18