Assembly Instructions

2
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or
damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all
connections are tight.
1
Attach leg (3) to top frame (1) by
using screw (A) and allen wrench (D)
as shown.
3
2
Attach bottom frame (2) to leg (3) by
using screw (A) and allen wrench (D)
then tighten all screws firmly.
Following, attach leveler (B) to the bottom
frame (2) as shown.
Turn the unit upside down and put glass pad (C) onto the top frame (1) then put on glass top
(4) as below shown.