Installation Instructions & Operating Manual

unit: mm

LOCATING YOUR ELECTRIC FIREPLACE

Your new electric fireplace may be installed virtually anywhere in your home. However, when choosing a

location ensure that the general instructions are followed. For best results, install out of direct sunlight.

Power supply service must be either completed or placed within the electric fireplace prior to finishing to

avoid reconstruction.

WARNING ! Keep drapery and other furnishings at least 3ft /0.9m from the front of the

electric fireplace.

FRAMING

·Choose a fireplace location and frame as shown in figure 2.

·Frame in the fireplace with a header across the top.

·It is important to allow for finished face when setting the depth of the frame.

·If a hearth system or raised hearth is to be installed, the unit MUST be raised to provide service access

and use of front.

·The fireplace can now be positioned in the opening.

·Level it with shims if necessary, and attach the unit to the frame using the fit brackets provided.

·Combustible or non-combustible materials may be used to finish up to the fireplace opening.

Note:

Ensure that you leave adequate room to remove and replace the front screen or optional

front.

figure 2

W1 W2 W3

855 895 924

1055 1095 1124

1355 1395 1424

1555 1595 1624

1955 1995 2024

W D H

928 180 495

1128 180 495

1428 180 495

1628

180

495

2028 180 495

unit: mm