Instructions / Assembly

ManualsBrandsWS Bath Collections ManualsBathFly 3050 Glossy White Ceramic Rectangle Vessel Sink

Installaon Guide I Bathroom Sinks

I n s t a l l a t i o n

I n s t r u c t i o n s

M o d e l │

B a t h r o o m S i n k s

Dimensions Metric

1 inch = 2.54 cm

1 inch = 25.4 mm

1051 Lea Drive - Collegeville, PA 19426

Tel. 215 513 9400 - Fax 610 831 0215

www.wsbathcollections.com - info@wsbathcollections.com

Index

Bathroom Sink Type Page

Wall Mount Bathroom Sinks 1-3

Vessel & Countertop Bathroom Sinks 4-5

Undermount Bathroom Sinks 6-7

Pedestal Bathroom Sinks 8-9

Note:

Installaon guides show general instrucons and may not depict your exact model in the gures and graphics.

WS Bath Collecons accepts no liability for any damage to the property; oor, walls, pluming, sink, or personal

injury during installaon.

If you have any quesons or need any addional help please do not hesitate to contact us.

Summary of content (10 pages)

PAGE 1
. Installation Guide I Bathroom Sinks Index Bathroom Sink Type Page Wall Mount Bathroom Sinks Vessel & Countertop Bathroom Sinks Undermount Bathroom Sinks Pedestal Bathroom Sinks 1-3 4-5 6-7 8-9 Note: Installation guides show general instructions and may not depict your exact model in the figures and graphics. WS Bath Collections accepts no liability for any damage to the property; floor, walls, pluming, sink, or personal injury during installation.
PAGE 2
. Wall-mount Sinks Installation Instructions Before You Start Installation We recommend that you consult with a professional if you are unfamiliar with installing this type of product. WS Bath Collections accepts no liability for any damage to the property; floor, walls, pluming, sink, or personal injury during installation. Page 1/9 Tools You May Need Pencil Measuring Tape Level Stud Finder Drill Follow up all local plumbing and building codes.
PAGE 3
Wall-mount Sinks Installation Instructions Page 2/9 Installation Instructions & Diagrams 1. 2. 3. 4. 5. 6. 7. Hold the sink up at the desired installation location. Ensure that the sink is level, then mark the location of the mounting holes on the back of the sink. Drill pilot holes at the marked locations of the sink’s mounting holes. Insert the anchors into the drilled holes, screw the mounting hanger bolts. Move the sink back into position at the installation location.
PAGE 4
. Wall-mount Sinks Installation Instructions Page 3/9 Studs (2) 2”x 6” or larger needed for support of wall-mount sinks Hanger bolt Bushing Washer Nut Proceed to installation of the drain, trap, water supply lines, and the sink faucet. Complete the installation by applying a thin bead of silicone around the back of the sink where it meets the wall.
PAGE 5
. Vessel & Countertop Sinks Installation Instructions Before You Start Installation Page 4/9 Tools You May Need We recommend that you consult with a professional if you are unfamiliar with installing this type of product. WS Bath Collections accepts no liability for any damage to the property; floor, walls, pluming, sink, or personal injury during installation. Follow up all local plumbing and building codes.
PAGE 6
. Vessel & Countertop Sinks Installation Instructions Page 5/9 Installation Instruction & Diagrams 1. Position the sink on the countertop at the installation location. 1 Note: Sink shown in round shape for illustration purpose only. Sink can be of any shape i.e. round, rectangular, among others. 2. 3. Trace the sink drain hole onto the countertop. Remove the sink and set aside. 4. Drill a 2.2” (55 mm) hole at the marked location. Hole can be larger than 2.
PAGE 7
. Undermount Sinks Installation Instructions Before You Start Installation Page 6/9 Tools You May Need We recommend that you consult with a professional if you are unfamiliar with installing this type of product. WS Bath Collections accepts no liability for any damage to the property; floor, walls, pluming, sink, or personal injury during installation. Hammer Damp Cloth Drill Damp Cloth Pencil Follow up all local plumbing and building codes.
PAGE 8
. Undermount Sinks Installation Instructions Page 7/9 Installation Instructions & Diagrams 1. 2. Verify countertop or cabinet clearance Trace the template on the countertop. Cut out the opening along the inside edge of the line. 3. Clean the underside of the countertop and the rim of the sink. Loosely install the clips. 4. 5. 6. 7. 8. Generously apply 100% silicone around the rim. Hold the sink in place and rotate each clip over the rim. Evenly tighten the clips to secure.
PAGE 9
. Pedestal Sinks Installation Instructions Before You Start Installation We recommend that you consult with a professional if you are unfamiliar with installing this type of product. WS Bath Collections accepts no liability for any damage to the property; floor, walls, pluming, sink, or personal injury during installation. Page 8/9 Tools You May Need Pencil Measuring Tape Level Stud Finder Drill Follow up all local plumbing and building codes.
PAGE 10
Pedestal Sinks Installation Instructions Page 9/9 Installation Instructions & Diagrams 1. 2. 3. 4. 5. 6. 7. 8. Hold the sink up and the pedestal at the desired installation location. Ensure that the sink is level, then mark the location of the mounting holes on the back of the sink. Drill pilot holes at the marked locations of the sink’s mounting holes. 1 2 Insert the anchors into the drilled holes, screw the mounting hanger bolts. Move the sink back into position at the installation location.