Installation Guide

.
I n s t a l l a t i o n
I n s t r u c t i o n s
M o d e l │
D r o p - i n o r A b o v e -
c o u n t e r S i n k s
Dimensions Metric
1 inch = 2.54 cm
1 inch = 25.4 mm
1051 Lea Drive - Collegeville, PA 19426
Tel. [phone] - Fax [phone]
www.wsbathcollections.com - [e-mail]
Before You Start Installaon
We recommend that you consult with a profession-
al if you are unfamiliar with installing this type of
product. WS Bath Collecons accepts no liability for
any damage to the property; oor, walls, pluming,
sink, or personal injury during installaon.
Follow up all local plumbing and building codes.
Geng Started
Insure that you have all the requires materials and
tools for the installaon.
Make sure that in-wall plumbing has already been
prepared.
Unpack the new sink and inspect it for damage prior
to installaon.
WS Bath Collecons reserves the right to make revi-
sions in the design of products without noce.
Installaon
1. Verify countertop or cabinet clearance.
2. Trace the template on the countertop. Cut out
the opening along the inside edge of the line.
3. Clean the underside of the countertop and the
rim of the sink.
4. Loosely install the clips.
5. Generously apply 100% silicone around the rim.
6. Hold the sink in place and rotate each clip over
the rim. Evenly ghten the clips to secure.
7. Immediately wipe away any excess sealant.
8. Proceed to installaon of the drain, trap, water
supply lines, and the sink faucet.
Drop-in or Above-counter Sinks Installaon Instrucons
Page 1/2
Tools You May Need
Damp Cloth Pencil Hammer
Damp Cloth Safety Googles Drill
Epoxy Pencil Silicone Sealant
100%
Note
WS Bath Collecons reserves the right to make revisions in the
design of products without noce.