Specifications

S-27
05-E2B, 05-E2BG, WSM
DIESEL ENGINE
Radial Clearance
1. If the wheel contact to the housing, replace the turbocharger
assembly with new one.
W1077353
[2] DISASSEMBLING AND ASSEMBLING
(1) Draining Oil and Coolant
Draining Oil and Coolant
CAUTION
• Never remove radiator cap until coolant temperature is
below its boiling point. Then loosen cap slightly to the stop
to relieve any excess pressure before removing cap
completely.
1. Prepare a bucket. Open the drain cock to drain coolant.
2. Prepare an oil pan. Remove the drain plug to drain engine oil in
the pan.
W1021151
(2) External Components
Air Cleaner and Muffler
1. Remove the air cleaner.
2. Remove muffler retaining nuts to remove the muffler.
(When reassembling)
• Install the muffler gasket so that its steel side face the muffler.
W1021239
Alternator and Fan Belt
1. Remove the alternator (1).
2. Remove the fan belt (2).
3. Remove the starter (3).
(When reassembling)
• Check to see that there are no cracks on the belt surface.
IMPORTANTQ
• After reassembling the fan belt, be sure to adjust the fan belt
tension.
W1021324
(1) Alternator
(2) Fan Belt
(3) Starter
KiSC issued 06, 2011 A