Specifications

CAMERA ETHERNET PROTOCOLS AND PORTS
The PTZ camera control functions and video streaming functions to and from the
SW720-H264-SD camera are transmitted over a 100Base-TX Ethernet connection using
specific Ethernet ports are assigned for each of the various functions and protocols.
DEFAULT IP ADDRESS
The SW720-H264-SD camera default IP Address is: 192.168.1.251
DEFAULT PORT ADDRESSES
The following ports are provided for the various services available.
Protocol Default Port Default Transport Notes
WTI 53935 UDP
NTCIP 55000 UDP
Pelco-D 55001 UDP
Sidewinder H.264 series
devices are fixed at multidrop
address 1.
Cohu 55002 UDP
Sidewinder H.264 series
devices are fixed at multidrop
address 1.
ONVIF 55003 TCP
UDP not supported. Server
shared with HTTP by default.
HTTP Server 55003 TCP
UDP not supported. Server
shared with ONVIF by
default.
Pass-Through 55004 UDP
Disabled by default on
Sidewider SW720 H.264
SD/HD. Enabled by default on
Sidewinder H.264 Video
Encoder.
WS-Discovery 3702
UDP Multicast
(group address
239.255.255.250)
RTSP Server 8554 TCP UDP not supported
Multicast Video
RTP/RTCP
18888/18889
UDP Multicast
(group address
Only if video stream 1 is set
up for Multicast transport. A
SW720-H.264-HD WTI ~ Page 24 of 31